From: Dirk Behme <dirk.behme@de.bosch.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH V2 1/1] i.mx: i.mx6q: add the initial support for i.mx6q Sabre Lite board
Date: Tue, 13 Dec 2011 16:31:48 +0100 [thread overview]
Message-ID: <4EE76FE4.1000206@de.bosch.com> (raw)
In-Reply-To: <CAOMZO5B63yUp2xV--P0nEtQSWVMLRkawuUz0PsfHcuxH9U7Rfg@mail.gmail.com>
On 13.12.2011 16:06, Fabio Estevam wrote:
> Jason/Dirk,
>
> On Tue, Dec 13, 2011 at 11:30 AM, Jason Liu <jason.hui@linaro.org> wrote:
>> Add the initial support for Freescale i.MX6Q Sabre Lite board
>>
>> Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com>
>> Signed-off-by: Jason Liu <jason.hui@linaro.org>
>>
>> ---
>> V2: change the default script to let linaro image boot, and also
>> change the default env to dev 0, which is normal SD slot, not
>> the Micro-SD slot
>
> This is what I get on my sabrelite:
>
> U-Boot 2011.12-rc1-00004-g06e42c6-dirty (Dec 13 2011 - 12:58:29)
>
> CPU: Freescale i.MX61 family rev1.0 at 792 MHz
> Reset cause: unknown reset
> Board: MX6Q-Sabre Lite
> DRAM: 1 GiB
> WARNING: Caches not enabled
> MMC: FSL_ESDHC: 0, FSL_ESDHC: 1
>
> (and then U-boot prompt never shows up).
I think to remember that this might happen if you have some issues with
the SD card. At least this was my wild guess the last time I saw
something like this ;)
Anyway, I will send you a binary for test which works for me in a
private mail.
Best regards
Dirk
next prev parent reply other threads:[~2011-12-13 15:31 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-12-13 13:30 [U-Boot] [PATCH V2 1/1] i.mx: i.mx6q: add the initial support for i.mx6q Sabre Lite board Jason Liu
2011-12-13 15:06 ` Fabio Estevam
2011-12-13 15:31 ` Dirk Behme [this message]
2011-12-13 16:07 ` Fabio Estevam
2011-12-13 16:12 ` Dirk Behme
2011-12-13 16:19 ` Fabio Estevam
2011-12-13 16:23 ` Dirk Behme
2011-12-14 11:31 ` Dirk Behme
2011-12-16 2:56 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4EE76FE4.1000206@de.bosch.com \
--to=dirk.behme@de.bosch.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox