From mboxrd@z Thu Jan  1 00:00:00 1970
From: Dirk Behme <dirk.behme@de.bosch.com>
Date: Tue, 13 Dec 2011 17:12:45 +0100
Subject: [U-Boot] [PATCH V2 1/1] i.mx: i.mx6q: add the initial support
 for i.mx6q Sabre Lite board
In-Reply-To: <CAOMZO5BgBFAJCL_rd6n2OYnpZ0E1rCsqgbqp7uJ8SrFZP3B5SA@mail.gmail.com>
References: <1323783000-17617-1-git-send-email-jason.hui@linaro.org>	<CAOMZO5B63yUp2xV--P0nEtQSWVMLRkawuUz0PsfHcuxH9U7Rfg@mail.gmail.com>	<4EE76FE4.1000206@de.bosch.com>
	<CAOMZO5BgBFAJCL_rd6n2OYnpZ0E1rCsqgbqp7uJ8SrFZP3B5SA@mail.gmail.com>
Message-ID: <4EE7797D.7090101@de.bosch.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On 13.12.2011 17:07, Fabio Estevam wrote:
> On Tue, Dec 13, 2011 at 1:31 PM, Dirk Behme <dirk.behme@de.bosch.com> wrote:
> 
>>> U-Boot 2011.12-rc1-00004-g06e42c6-dirty (Dec 13 2011 - 12:58:29)
>>>
>>> CPU:   Freescale i.MX61 family rev1.0 at 792 MHz
>>> Reset cause: unknown reset
>>> Board: MX6Q-Sabre Lite
>>> DRAM:  1 GiB
>>> WARNING: Caches not enabled
>>> MMC:   FSL_ESDHC: 0, FSL_ESDHC: 1
>>>
>>> (and then U-boot prompt never shows up).
>>
>> I think to remember that this might happen if you have some issues with the
>> SD card. At least this was my wild guess the last time I saw something like
>> this ;)
>>
>> Anyway, I will send you a binary for test which works for me in a private
>> mail.
> 
> Thanks. Your binary works fine and it is based on 2009.09.

Looking at the binary I sent you it has

U-Boot 2011.09-01509-g1d76eb8-dirty (Dec 13 2011 - 16:28:33)

?

Best regards

Dirk