* [U-Boot] [PATCH] mx28: remove omap specific config options
@ 2011-12-20 12:00 Veli-Pekka Peltola
2011-12-20 12:10 ` Fabio Estevam
` (2 more replies)
0 siblings, 3 replies; 4+ messages in thread
From: Veli-Pekka Peltola @ 2011-12-20 12:00 UTC (permalink / raw)
To: u-boot
Config options for OMAP are not used with i.MX28 so remove dead code.
Signed-off-by: Veli-Pekka Peltola <veli-pekka.peltola@bluegiga.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
---
arch/arm/cpu/arm926ejs/mx28/start.S | 6 ------
1 files changed, 0 insertions(+), 6 deletions(-)
diff --git a/arch/arm/cpu/arm926ejs/mx28/start.S b/arch/arm/cpu/arm926ejs/mx28/start.S
index 94696d6..2cd4d73 100644
--- a/arch/arm/cpu/arm926ejs/mx28/start.S
+++ b/arch/arm/cpu/arm926ejs/mx28/start.S
@@ -40,12 +40,6 @@
#include <common.h>
#include <version.h>
-#if defined(CONFIG_OMAP1610)
-#include <./configs/omap1510.h>
-#elif defined(CONFIG_OMAP730)
-#include <./configs/omap730.h>
-#endif
-
/*
*************************************************************************
*
--
1.7.5.4
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [U-Boot] [PATCH] mx28: remove omap specific config options
2011-12-20 12:00 [U-Boot] [PATCH] mx28: remove omap specific config options Veli-Pekka Peltola
@ 2011-12-20 12:10 ` Fabio Estevam
2011-12-20 12:12 ` Stefano Babic
2011-12-20 15:13 ` Stefano Babic
2 siblings, 0 replies; 4+ messages in thread
From: Fabio Estevam @ 2011-12-20 12:10 UTC (permalink / raw)
To: u-boot
On Tue, Dec 20, 2011 at 10:00 AM, Veli-Pekka Peltola
<veli-pekka.peltola@bluegiga.com> wrote:
> Config options for OMAP are not used with i.MX28 so remove dead code.
>
> Signed-off-by: Veli-Pekka Peltola <veli-pekka.peltola@bluegiga.com>
> Cc: Stefano Babic <sbabic@denx.de>
> Cc: Marek Vasut <marek.vasut@gmail.com>
> Cc: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Fabio Estevam <fabio.estevam@freescale.com>
^ permalink raw reply [flat|nested] 4+ messages in thread
* [U-Boot] [PATCH] mx28: remove omap specific config options
2011-12-20 12:00 [U-Boot] [PATCH] mx28: remove omap specific config options Veli-Pekka Peltola
2011-12-20 12:10 ` Fabio Estevam
@ 2011-12-20 12:12 ` Stefano Babic
2011-12-20 15:13 ` Stefano Babic
2 siblings, 0 replies; 4+ messages in thread
From: Stefano Babic @ 2011-12-20 12:12 UTC (permalink / raw)
To: u-boot
On 20/12/2011 13:00, Veli-Pekka Peltola wrote:
> Config options for OMAP are not used with i.MX28 so remove dead code.
>
> Signed-off-by: Veli-Pekka Peltola <veli-pekka.peltola@bluegiga.com>
> Cc: Stefano Babic <sbabic@denx.de>
> Cc: Marek Vasut <marek.vasut@gmail.com>
> Cc: Fabio Estevam <fabio.estevam@freescale.com>
> ---
> arch/arm/cpu/arm926ejs/mx28/start.S | 6 ------
> 1 files changed, 0 insertions(+), 6 deletions(-)
>
> diff --git a/arch/arm/cpu/arm926ejs/mx28/start.S b/arch/arm/cpu/arm926ejs/mx28/start.S
> index 94696d6..2cd4d73 100644
> --- a/arch/arm/cpu/arm926ejs/mx28/start.S
> +++ b/arch/arm/cpu/arm926ejs/mx28/start.S
> @@ -40,12 +40,6 @@
> #include <common.h>
> #include <version.h>
>
> -#if defined(CONFIG_OMAP1610)
> -#include <./configs/omap1510.h>
> -#elif defined(CONFIG_OMAP730)
> -#include <./configs/omap730.h>
> -#endif
Thanks to point out - I will not postpone the release for this, but I
will apply it to the next branch.
Acked-by: Stefano Babic <sbabic@denx.de>
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 4+ messages in thread
* [U-Boot] [PATCH] mx28: remove omap specific config options
2011-12-20 12:00 [U-Boot] [PATCH] mx28: remove omap specific config options Veli-Pekka Peltola
2011-12-20 12:10 ` Fabio Estevam
2011-12-20 12:12 ` Stefano Babic
@ 2011-12-20 15:13 ` Stefano Babic
2 siblings, 0 replies; 4+ messages in thread
From: Stefano Babic @ 2011-12-20 15:13 UTC (permalink / raw)
To: u-boot
On 20/12/2011 13:00, Veli-Pekka Peltola wrote:
> Config options for OMAP are not used with i.MX28 so remove dead code.
>
> Signed-off-by: Veli-Pekka Peltola <veli-pekka.peltola@bluegiga.com>
> Cc: Stefano Babic <sbabic@denx.de>
> Cc: Marek Vasut <marek.vasut@gmail.com>
> Cc: Fabio Estevam <fabio.estevam@freescale.com>
> ---
> arch/arm/cpu/arm926ejs/mx28/start.S | 6 ------
> 1 files changed, 0 insertions(+), 6 deletions(-)
>
Applied to u-boot-imx, next branch, thanks.
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2011-12-20 15:13 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-12-20 12:00 [U-Boot] [PATCH] mx28: remove omap specific config options Veli-Pekka Peltola
2011-12-20 12:10 ` Fabio Estevam
2011-12-20 12:12 ` Stefano Babic
2011-12-20 15:13 ` Stefano Babic
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox