From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Thu, 22 Dec 2011 10:18:20 +0100 Subject: [U-Boot] Building uImage with multiple load addresses In-Reply-To: <20111222090211.806B611CDEB1@gemini.denx.de> References: <4EF2EFF1.1030406@denx.de> <20111222090211.806B611CDEB1@gemini.denx.de> Message-ID: <4EF2F5DC.8010703@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 22/12/2011 10:02, Wolfgang Denk wrote: > Dear Stefano Babic, > > In message <4EF2EFF1.1030406@denx.de> you wrote: >> >>> make uImage LOADADDR=0x70008000 >> >> Exactly, I do the same. > > Before, you wrote you were using 0x80008000 ... No, I don't: I wrote that I am using 0x80008000 for MX3. Fabio wrote the example for MX53, and the value is correct (0x70008000). And for MX51 we have another one (on the MX51 the RAM starts at address 0x90000000). There is no a general load address for all IMX SOCs. Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de =====================================================================