* [U-Boot] Pull request: u-boot-tegra/next
@ 2011-12-22 20:59 Tom Warren
2011-12-22 21:07 ` Albert ARIBAUD
2011-12-22 21:08 ` Stephen Warren
0 siblings, 2 replies; 12+ messages in thread
From: Tom Warren @ 2011-12-22 20:59 UTC (permalink / raw)
To: u-boot
Albert,
Please pull u-boot-tegra/next. Thanks. Happy holidays!
The following changes since commit 953209bf5ef0889a1baa02aa0ed5324f53ff8fda:
arm: add __aeabi_unwind_cpp_pr1() function to avoid linker complaints (2011-12-11 13:56:57 +0100)
are available in the git repository at:
git://git.denx.de/u-boot-tegra.git next
Simon Glass (14):
tegra2: Tidy UART selection
tegra2: Add UARTB support
tegra2: config: Enable SPI flash on Seaboard
tegra2: Enable SPI environment on Seaboard
tegra2: Implement SPI / UART GPIO switch
tegra2: spi: Support SPI / UART switch
tegra2: Plumb in SPI/UART switch code
tegra: Fix build error in plutux, medcom
tegra: Move cpu_init_cp15() to arch_cpu_init()
tegra: Move clock_early_init() to arch_cpu_init()
tegra: add clock_ll_start_uart() to enable UART prior to reloc
tegra: Add a function mux feature
tegra: Add support for UART init in cpu board.c
tegra: Move boards over to use arch-level board UART function
Stephen Warren (1):
tegra2: Enable CONFIG_SYS_RELATIVE_IMAGES
Thierry Reding (7):
tegra2: Always build with USE_PRIVATE_LIBGCC=yes.
tegra2: Change CONFIG_SYS_TEXT_BASE to 0x00108000.
tegra2: Move tegra2_mmc_init() prototype to public header.
tegra2: Add common Avionic Design Tamonten support.
tegra2: Add Avionic Design Plutux support.
tegra2: Add Avionic Design Medcom support.
tegra2: Optimize out-of-tree build for Ventana.
Tom Warren (2):
tegra2: spi: Add SPI driver for Tegra2 SOC
arm: Tegra: Fix Harmony and Ventana builds in u-boot-tegra/master
MAINTAINERS | 5 +
arch/arm/cpu/armv7/tegra2/Makefile | 2 +-
arch/arm/cpu/armv7/tegra2/board.c | 58 ++++
arch/arm/cpu/armv7/tegra2/clock.c | 14 +
arch/arm/cpu/armv7/tegra2/config.mk | 2 +
arch/arm/cpu/armv7/tegra2/funcmux.c | 58 ++++
arch/arm/include/asm/arch-tegra2/board.h | 30 ++
arch/arm/include/asm/arch-tegra2/clock.h | 11 +
arch/arm/include/asm/arch-tegra2/funcmux.h | 41 +++
arch/arm/include/asm/arch-tegra2/mmc.h | 27 ++
arch/arm/include/asm/arch-tegra2/tegra2.h | 1 +
arch/arm/include/asm/arch-tegra2/tegra2_spi.h | 76 ++++++
arch/arm/include/asm/arch-tegra2/uart-spi-switch.h | 46 ++++
board/avionic-design/common/tamonten.c | 116 ++++++++
board/avionic-design/common/tamonten.h | 32 +++
board/avionic-design/medcom/Makefile | 50 ++++
board/avionic-design/medcom/medcom.c | 45 ++++
board/avionic-design/plutux/Makefile | 50 ++++
board/avionic-design/plutux/plutux.c | 45 ++++
board/nvidia/common/Makefile | 47 ++++
board/nvidia/common/board.c | 73 +----
board/nvidia/common/board.h | 2 +-
board/nvidia/common/uart-spi-switch.c | 138 ++++++++++
board/nvidia/harmony/Makefile | 1 -
board/nvidia/harmony/harmony.c | 2 +-
board/nvidia/seaboard/Makefile | 1 -
board/nvidia/seaboard/seaboard.c | 5 +-
board/nvidia/ventana/Makefile | 5 +-
boards.cfg | 2 +
drivers/mmc/tegra2_mmc.h | 2 -
drivers/spi/Makefile | 1 +
drivers/spi/tegra2_spi.c | 279 ++++++++++++++++++++
include/configs/harmony.h | 3 +
include/configs/medcom.h | 64 +++++
include/configs/plutux.h | 64 +++++
include/configs/seaboard.h | 20 ++
include/configs/tegra2-common.h | 7 +-
include/configs/ventana.h | 3 +
38 files changed, 1355 insertions(+), 73 deletions(-)
create mode 100644 arch/arm/cpu/armv7/tegra2/funcmux.c
create mode 100644 arch/arm/include/asm/arch-tegra2/board.h
create mode 100644 arch/arm/include/asm/arch-tegra2/funcmux.h
create mode 100644 arch/arm/include/asm/arch-tegra2/mmc.h
create mode 100644 arch/arm/include/asm/arch-tegra2/tegra2_spi.h
create mode 100644 arch/arm/include/asm/arch-tegra2/uart-spi-switch.h
create mode 100644 board/avionic-design/common/tamonten.c
create mode 100644 board/avionic-design/common/tamonten.h
create mode 100644 board/avionic-design/medcom/Makefile
create mode 100644 board/avionic-design/medcom/medcom.c
create mode 100644 board/avionic-design/plutux/Makefile
create mode 100644 board/avionic-design/plutux/plutux.c
create mode 100644 board/nvidia/common/Makefile
create mode 100644 board/nvidia/common/uart-spi-switch.c
create mode 100644 drivers/spi/tegra2_spi.c
create mode 100644 include/configs/medcom.h
create mode 100644 include/configs/plutux.h
-----------------------------------------------------------------------------------
This email message is for the sole use of the intended recipient(s) and may contain
confidential information. Any unauthorized review, use, disclosure or distribution
is prohibited. If you are not the intended recipient, please contact the sender by
reply email and destroy all copies of the original message.
-----------------------------------------------------------------------------------
^ permalink raw reply [flat|nested] 12+ messages in thread* [U-Boot] Pull request: u-boot-tegra/next 2011-12-22 20:59 [U-Boot] Pull request: u-boot-tegra/next Tom Warren @ 2011-12-22 21:07 ` Albert ARIBAUD 2011-12-22 21:51 ` Tom Warren 2011-12-22 21:08 ` Stephen Warren 1 sibling, 1 reply; 12+ messages in thread From: Albert ARIBAUD @ 2011-12-22 21:07 UTC (permalink / raw) To: u-boot Le 22/12/2011 21:59, Tom Warren a ?crit : > Albert, > > Please pull u-boot-tegra/next. Thanks. Happy holidays! When I get such a request to 'pull .../next', I am never completely sure which branch of u-boot-arm I should be pulling into: is this supposed to be pulled into next or master? It *looks* like it is for next, but I want to be sure. In such cases, I tend to try and find out based on the u-boot-arm or u-boot branch the changes are based upon, but here: > The following changes since commit 953209bf5ef0889a1baa02aa0ed5324f53ff8fda: > > arm: add __aeabi_unwind_cpp_pr1() function to avoid linker complaints (2011-12-11 13:56:57 +0100) This commit corresponds to no branch of u-boot-arm or u-boot at the moment. What repo and branch was u-boot-tegra rebased onto before the pull request? > are available in the git repository at: > git://git.denx.de/u-boot-tegra.git next > > Simon Glass (14): > tegra2: Tidy UART selection > tegra2: Add UARTB support > tegra2: config: Enable SPI flash on Seaboard > tegra2: Enable SPI environment on Seaboard > tegra2: Implement SPI / UART GPIO switch > tegra2: spi: Support SPI / UART switch > tegra2: Plumb in SPI/UART switch code > tegra: Fix build error in plutux, medcom > tegra: Move cpu_init_cp15() to arch_cpu_init() > tegra: Move clock_early_init() to arch_cpu_init() > tegra: add clock_ll_start_uart() to enable UART prior to reloc > tegra: Add a function mux feature > tegra: Add support for UART init in cpu board.c > tegra: Move boards over to use arch-level board UART function > > Stephen Warren (1): > tegra2: Enable CONFIG_SYS_RELATIVE_IMAGES > > Thierry Reding (7): > tegra2: Always build with USE_PRIVATE_LIBGCC=yes. > tegra2: Change CONFIG_SYS_TEXT_BASE to 0x00108000. > tegra2: Move tegra2_mmc_init() prototype to public header. > tegra2: Add common Avionic Design Tamonten support. > tegra2: Add Avionic Design Plutux support. > tegra2: Add Avionic Design Medcom support. > tegra2: Optimize out-of-tree build for Ventana. > > Tom Warren (2): > tegra2: spi: Add SPI driver for Tegra2 SOC > arm: Tegra: Fix Harmony and Ventana builds in u-boot-tegra/master > > MAINTAINERS | 5 + > arch/arm/cpu/armv7/tegra2/Makefile | 2 +- > arch/arm/cpu/armv7/tegra2/board.c | 58 ++++ > arch/arm/cpu/armv7/tegra2/clock.c | 14 + > arch/arm/cpu/armv7/tegra2/config.mk | 2 + > arch/arm/cpu/armv7/tegra2/funcmux.c | 58 ++++ > arch/arm/include/asm/arch-tegra2/board.h | 30 ++ > arch/arm/include/asm/arch-tegra2/clock.h | 11 + > arch/arm/include/asm/arch-tegra2/funcmux.h | 41 +++ > arch/arm/include/asm/arch-tegra2/mmc.h | 27 ++ > arch/arm/include/asm/arch-tegra2/tegra2.h | 1 + > arch/arm/include/asm/arch-tegra2/tegra2_spi.h | 76 ++++++ > arch/arm/include/asm/arch-tegra2/uart-spi-switch.h | 46 ++++ > board/avionic-design/common/tamonten.c | 116 ++++++++ > board/avionic-design/common/tamonten.h | 32 +++ > board/avionic-design/medcom/Makefile | 50 ++++ > board/avionic-design/medcom/medcom.c | 45 ++++ > board/avionic-design/plutux/Makefile | 50 ++++ > board/avionic-design/plutux/plutux.c | 45 ++++ > board/nvidia/common/Makefile | 47 ++++ > board/nvidia/common/board.c | 73 +---- > board/nvidia/common/board.h | 2 +- > board/nvidia/common/uart-spi-switch.c | 138 ++++++++++ > board/nvidia/harmony/Makefile | 1 - > board/nvidia/harmony/harmony.c | 2 +- > board/nvidia/seaboard/Makefile | 1 - > board/nvidia/seaboard/seaboard.c | 5 +- > board/nvidia/ventana/Makefile | 5 +- > boards.cfg | 2 + > drivers/mmc/tegra2_mmc.h | 2 - > drivers/spi/Makefile | 1 + > drivers/spi/tegra2_spi.c | 279 ++++++++++++++++++++ > include/configs/harmony.h | 3 + > include/configs/medcom.h | 64 +++++ > include/configs/plutux.h | 64 +++++ > include/configs/seaboard.h | 20 ++ > include/configs/tegra2-common.h | 7 +- > include/configs/ventana.h | 3 + > 38 files changed, 1355 insertions(+), 73 deletions(-) > create mode 100644 arch/arm/cpu/armv7/tegra2/funcmux.c > create mode 100644 arch/arm/include/asm/arch-tegra2/board.h > create mode 100644 arch/arm/include/asm/arch-tegra2/funcmux.h > create mode 100644 arch/arm/include/asm/arch-tegra2/mmc.h > create mode 100644 arch/arm/include/asm/arch-tegra2/tegra2_spi.h > create mode 100644 arch/arm/include/asm/arch-tegra2/uart-spi-switch.h > create mode 100644 board/avionic-design/common/tamonten.c > create mode 100644 board/avionic-design/common/tamonten.h > create mode 100644 board/avionic-design/medcom/Makefile > create mode 100644 board/avionic-design/medcom/medcom.c > create mode 100644 board/avionic-design/plutux/Makefile > create mode 100644 board/avionic-design/plutux/plutux.c > create mode 100644 board/nvidia/common/Makefile > create mode 100644 board/nvidia/common/uart-spi-switch.c > create mode 100644 drivers/spi/tegra2_spi.c > create mode 100644 include/configs/medcom.h > create mode 100644 include/configs/plutux.h And then: > ----------------------------------------------------------------------------------- > This email message is for the sole use of the intended recipient(s) and may contain > confidential information. Any unauthorized review, use, disclosure or distribution > is prohibited. If you are not the intended recipient, please contact the sender by > reply email and destroy all copies of the original message. > ----------------------------------------------------------------------------------- Please remove this from messages on the list. Amicalement, -- Albert. ^ permalink raw reply [flat|nested] 12+ messages in thread
* [U-Boot] Pull request: u-boot-tegra/next 2011-12-22 21:07 ` Albert ARIBAUD @ 2011-12-22 21:51 ` Tom Warren 2011-12-22 22:51 ` Albert ARIBAUD 0 siblings, 1 reply; 12+ messages in thread From: Tom Warren @ 2011-12-22 21:51 UTC (permalink / raw) To: u-boot I did a 'git fetch git://git.denx.de/u-boot-arm.git', then rebased on that, as per the Workflow for Custodian git Repos wiki page. But that gave me a large number of changes in my pull request (most of which weren't my recent ones). So I did (on Simon's advice): git checkout -b next-try u-boot-arm/master git cherry-pick next~23, etc. for the commits I'd added since the last pull request. This resulted in a pull request w/just my commits, as below. So I make 'next-try' my 'next' branch & pushed it to u-boot-tegra. Note that I see this in my 'u-boot-arm' cloned repo, master branch: commit 4f1a2cd1637027f31de7796aedb1fa5fc0ec0f97 Merge: f8d2c65 953209b Author: Wolfgang Denk <wd@denx.de> Date: Mon Dec 12 07:56:41 2011 +0100 Merge branch 'master' of git://git.denx.de/u-boot-arm * 'master' of git://git.denx.de/u-boot-arm: arm: add __aeabi_unwind_cpp_pr1() function to avoid linker complaints post: fix compile issue for post tests on kirkwood The second hash in the 'Merge: ...' line has the below commit #. Maybe things diverged at some point? Let me know how I can straighten this out. I'd like to get it in before I leave for the holidays. Thanks, Tom > -----Original Message----- > From: Albert ARIBAUD [mailto:albert.u.boot at aribaud.net] > Sent: Thursday, December 22, 2011 2:08 PM > To: Tom Warren > Cc: Wolfgang Denk; u-boot at lists.denx.de > Subject: Re: Pull request: u-boot-tegra/next > > Le 22/12/2011 21:59, Tom Warren a ?crit : > > Albert, > > > > Please pull u-boot-tegra/next. Thanks. Happy holidays! > > When I get such a request to 'pull .../next', I am never completely sure > which branch of u-boot-arm I should be pulling into: is this supposed to be > pulled into next or master? It *looks* like it is for next, but I want to be > sure. > > In such cases, I tend to try and find out based on the u-boot-arm or u-boot > branch the changes are based upon, but here: > > > The following changes since commit > 953209bf5ef0889a1baa02aa0ed5324f53ff8fda: > > > > arm: add __aeabi_unwind_cpp_pr1() function to avoid linker > > complaints (2011-12-11 13:56:57 +0100) > > This commit corresponds to no branch of u-boot-arm or u-boot at the moment. > What repo and branch was u-boot-tegra rebased onto before the pull request? > > > are available in the git repository at: > > git://git.denx.de/u-boot-tegra.git next > > > > Simon Glass (14): > > tegra2: Tidy UART selection > > tegra2: Add UARTB support > > tegra2: config: Enable SPI flash on Seaboard > > tegra2: Enable SPI environment on Seaboard > > tegra2: Implement SPI / UART GPIO switch > > tegra2: spi: Support SPI / UART switch > > tegra2: Plumb in SPI/UART switch code > > tegra: Fix build error in plutux, medcom > > tegra: Move cpu_init_cp15() to arch_cpu_init() > > tegra: Move clock_early_init() to arch_cpu_init() > > tegra: add clock_ll_start_uart() to enable UART prior to reloc > > tegra: Add a function mux feature > > tegra: Add support for UART init in cpu board.c > > tegra: Move boards over to use arch-level board UART function > > > > Stephen Warren (1): > > tegra2: Enable CONFIG_SYS_RELATIVE_IMAGES > > > > Thierry Reding (7): > > tegra2: Always build with USE_PRIVATE_LIBGCC=yes. > > tegra2: Change CONFIG_SYS_TEXT_BASE to 0x00108000. > > tegra2: Move tegra2_mmc_init() prototype to public header. > > tegra2: Add common Avionic Design Tamonten support. > > tegra2: Add Avionic Design Plutux support. > > tegra2: Add Avionic Design Medcom support. > > tegra2: Optimize out-of-tree build for Ventana. > > > > Tom Warren (2): > > tegra2: spi: Add SPI driver for Tegra2 SOC > > arm: Tegra: Fix Harmony and Ventana builds in > > u-boot-tegra/master > > > > MAINTAINERS | 5 + > > arch/arm/cpu/armv7/tegra2/Makefile | 2 +- > > arch/arm/cpu/armv7/tegra2/board.c | 58 ++++ > > arch/arm/cpu/armv7/tegra2/clock.c | 14 + > > arch/arm/cpu/armv7/tegra2/config.mk | 2 + > > arch/arm/cpu/armv7/tegra2/funcmux.c | 58 ++++ > > arch/arm/include/asm/arch-tegra2/board.h | 30 ++ > > arch/arm/include/asm/arch-tegra2/clock.h | 11 + > > arch/arm/include/asm/arch-tegra2/funcmux.h | 41 +++ > > arch/arm/include/asm/arch-tegra2/mmc.h | 27 ++ > > arch/arm/include/asm/arch-tegra2/tegra2.h | 1 + > > arch/arm/include/asm/arch-tegra2/tegra2_spi.h | 76 ++++++ > > arch/arm/include/asm/arch-tegra2/uart-spi-switch.h | 46 ++++ > > board/avionic-design/common/tamonten.c | 116 ++++++++ > > board/avionic-design/common/tamonten.h | 32 +++ > > board/avionic-design/medcom/Makefile | 50 ++++ > > board/avionic-design/medcom/medcom.c | 45 ++++ > > board/avionic-design/plutux/Makefile | 50 ++++ > > board/avionic-design/plutux/plutux.c | 45 ++++ > > board/nvidia/common/Makefile | 47 ++++ > > board/nvidia/common/board.c | 73 +---- > > board/nvidia/common/board.h | 2 +- > > board/nvidia/common/uart-spi-switch.c | 138 ++++++++++ > > board/nvidia/harmony/Makefile | 1 - > > board/nvidia/harmony/harmony.c | 2 +- > > board/nvidia/seaboard/Makefile | 1 - > > board/nvidia/seaboard/seaboard.c | 5 +- > > board/nvidia/ventana/Makefile | 5 +- > > boards.cfg | 2 + > > drivers/mmc/tegra2_mmc.h | 2 - > > drivers/spi/Makefile | 1 + > > drivers/spi/tegra2_spi.c | 279 > ++++++++++++++++++++ > > include/configs/harmony.h | 3 + > > include/configs/medcom.h | 64 +++++ > > include/configs/plutux.h | 64 +++++ > > include/configs/seaboard.h | 20 ++ > > include/configs/tegra2-common.h | 7 +- > > include/configs/ventana.h | 3 + > > 38 files changed, 1355 insertions(+), 73 deletions(-) create mode > > 100644 arch/arm/cpu/armv7/tegra2/funcmux.c > > create mode 100644 arch/arm/include/asm/arch-tegra2/board.h > > create mode 100644 arch/arm/include/asm/arch-tegra2/funcmux.h > > create mode 100644 arch/arm/include/asm/arch-tegra2/mmc.h > > create mode 100644 arch/arm/include/asm/arch-tegra2/tegra2_spi.h > > create mode 100644 arch/arm/include/asm/arch-tegra2/uart-spi-switch.h > > create mode 100644 board/avionic-design/common/tamonten.c > > create mode 100644 board/avionic-design/common/tamonten.h > > create mode 100644 board/avionic-design/medcom/Makefile > > create mode 100644 board/avionic-design/medcom/medcom.c > > create mode 100644 board/avionic-design/plutux/Makefile > > create mode 100644 board/avionic-design/plutux/plutux.c > > create mode 100644 board/nvidia/common/Makefile create mode 100644 > > board/nvidia/common/uart-spi-switch.c > > create mode 100644 drivers/spi/tegra2_spi.c create mode 100644 > > include/configs/medcom.h create mode 100644 include/configs/plutux.h > > And then: > > > ---------------------------------------------------------------------- > > ------------- This email message is for the sole use of the intended > > recipient(s) and may contain confidential information. Any > > unauthorized review, use, disclosure or distribution is prohibited. > > If you are not the intended recipient, please contact the sender by > > reply email and destroy all copies of the original message. > > ---------------------------------------------------------------------- > > ------------- > > Please remove this from messages on the list. > > Amicalement, > -- > Albert. ^ permalink raw reply [flat|nested] 12+ messages in thread
* [U-Boot] Pull request: u-boot-tegra/next 2011-12-22 21:51 ` Tom Warren @ 2011-12-22 22:51 ` Albert ARIBAUD 2011-12-22 23:17 ` Tom Warren 0 siblings, 1 reply; 12+ messages in thread From: Albert ARIBAUD @ 2011-12-22 22:51 UTC (permalink / raw) To: u-boot Le 22/12/2011 22:51, Tom Warren a ?crit : > I did a 'git fetch git://git.denx.de/u-boot-arm.git', then rebased on that, as per the Workflow for Custodian git Repos wiki page. But that gave me a large number of changes in my pull request (most of which weren't my recent ones). So I did (on Simon's advice): Note that the flow is for master branches, not next, although it can apply on next as well if you request a pull of a next into a next. > git checkout -b next-try u-boot-arm/master > git cherry-pick next~23, etc. for the commits I'd added since the last pull request. You should not have to cherry-pick. If your rebase does not fail, it should leave your branch with only tour patches on it. However, cherry-picking should work just as ok. Note BTW that you can cherry-pick a range, IIRC. > This resulted in a pull request w/just my commits, as below. So I make 'next-try' my 'next' branch& pushed it to u-boot-tegra. Yet this does not tell me if you want it pushed on my next or master... > Note that I see this in my 'u-boot-arm' cloned repo, master branch: > > commit 4f1a2cd1637027f31de7796aedb1fa5fc0ec0f97 > Merge: f8d2c65 953209b > Author: Wolfgang Denk<wd@denx.de> > Date: Mon Dec 12 07:56:41 2011 +0100 Is that what you see as 'u-boot-arm/master' ? Had you done a 'git fetch u-boot-arm' (or whatever is your nickname for the ARM repo) before rebasing? Because since dec 20, u-boot-arm/master is at commit e570fe8ef2734fddc15e086b7bc344e64c907e81 -- and anyway, that is a commit by Wolfgang to merge the ARM repo, not a commit *from* the ARM repo. > Merge branch 'master' of git://git.denx.de/u-boot-arm > > * 'master' of git://git.denx.de/u-boot-arm: > arm: add __aeabi_unwind_cpp_pr1() function to avoid linker complaints > post: fix compile issue for post tests on kirkwood > > The second hash in the 'Merge: ...' line has the below commit #. Maybe things diverged at some point? Things cannot diverge between u-boot and u-bot-arm, as I always rebase my pull requests onto the latest u-boot master branch at the very time of the request -- just like pull requests to ARM should always be done above the current u-boot-arm/master. > Let me know how I can straighten this out. I'd like to get it in before I leave for the holidays. My advice is: 1) Before requesting a pull, make sure you are rebased against the latest u-boo-arm master and next branches by doing a 'git fetch u-boot-arm' (or whatever your remote nickname for the ARM repo is; if you don't have a remote nickname for it, then do a 'git fetch git://git.denx.de/u-boot-arm') then a 'git rebase u-boot-arm/master' (assuming your own master branch is checked out of course). I personally always use the commands git checkout master [that's my local ARM master branch] git fetch u-boot [that syncs my local copy of u-boot/master] git rebase u-boot/master [after that I'm good for a pull req] before a 'git request-pull'. 2) explicitly state which ARM branch the pull should be done into. If you don't specify explicitly but the branch to pull from is master, I'll pull into ARM master, but otherwise, I'll ask. > Thanks, np > Tom Amicalement, -- Albert. ^ permalink raw reply [flat|nested] 12+ messages in thread
* [U-Boot] Pull request: u-boot-tegra/next 2011-12-22 22:51 ` Albert ARIBAUD @ 2011-12-22 23:17 ` Tom Warren 2011-12-23 15:07 ` Albert ARIBAUD 2011-12-23 22:15 ` Albert ARIBAUD 0 siblings, 2 replies; 12+ messages in thread From: Tom Warren @ 2011-12-22 23:17 UTC (permalink / raw) To: u-boot Alright, I hope I've gotten it right this time. I had already done a git fetch of the u-boot-arm master (see my very first sentence below), but regardless, I followed your 'always use commands' and I believe I've gotten a valid repo. It's pushed as both 'master' and 'next' to u-boot-tegra.git. Here's the pull request, please pull into arm master. Thanks. The following changes since commit e570fe8ef2734fddc15e086b7bc344e64c907e81: PXA: Kill last remnants of set_GPIO_mode function (2011-12-19 17:52:44 +0100) are available in the git repository at: git://git.denx.de/u-boot-tegra.git master Simon Glass (14): tegra2: Tidy UART selection tegra2: Add UARTB support tegra2: config: Enable SPI flash on Seaboard tegra2: Enable SPI environment on Seaboard tegra2: Implement SPI / UART GPIO switch tegra2: spi: Support SPI / UART switch tegra2: Plumb in SPI/UART switch code tegra: Fix build error in plutux, medcom tegra: Move cpu_init_cp15() to arch_cpu_init() tegra: Move clock_early_init() to arch_cpu_init() tegra: add clock_ll_start_uart() to enable UART prior to reloc tegra: Add a function mux feature tegra: Add support for UART init in cpu board.c tegra: Move boards over to use arch-level board UART function Thierry Reding (7): tegra2: Always build with USE_PRIVATE_LIBGCC=yes. tegra2: Change CONFIG_SYS_TEXT_BASE to 0x00108000. tegra2: Move tegra2_mmc_init() prototype to public header. tegra2: Add common Avionic Design Tamonten support. tegra2: Add Avionic Design Plutux support. tegra2: Add Avionic Design Medcom support. tegra2: Optimize out-of-tree build for Ventana. Tom Warren (2): tegra2: spi: Add SPI driver for Tegra2 SOC arm: Tegra: Fix Harmony and Ventana builds in u-boot-tegra/master MAINTAINERS | 5 + arch/arm/cpu/armv7/tegra2/Makefile | 2 +- arch/arm/cpu/armv7/tegra2/board.c | 58 ++++ arch/arm/cpu/armv7/tegra2/clock.c | 14 + arch/arm/cpu/armv7/tegra2/config.mk | 2 + arch/arm/cpu/armv7/tegra2/funcmux.c | 58 ++++ arch/arm/include/asm/arch-tegra2/board.h | 30 ++ arch/arm/include/asm/arch-tegra2/clock.h | 11 + arch/arm/include/asm/arch-tegra2/funcmux.h | 41 +++ arch/arm/include/asm/arch-tegra2/mmc.h | 27 ++ arch/arm/include/asm/arch-tegra2/tegra2.h | 1 + arch/arm/include/asm/arch-tegra2/tegra2_spi.h | 76 ++++++ arch/arm/include/asm/arch-tegra2/uart-spi-switch.h | 46 ++++ board/avionic-design/common/tamonten.c | 116 ++++++++ board/avionic-design/common/tamonten.h | 32 +++ board/avionic-design/medcom/Makefile | 50 ++++ board/avionic-design/medcom/medcom.c | 45 ++++ board/avionic-design/plutux/Makefile | 50 ++++ board/avionic-design/plutux/plutux.c | 45 ++++ board/nvidia/common/Makefile | 47 ++++ board/nvidia/common/board.c | 73 +---- board/nvidia/common/board.h | 2 +- board/nvidia/common/uart-spi-switch.c | 138 ++++++++++ board/nvidia/harmony/Makefile | 1 - board/nvidia/harmony/harmony.c | 2 +- board/nvidia/seaboard/Makefile | 1 - board/nvidia/seaboard/seaboard.c | 5 +- board/nvidia/ventana/Makefile | 5 +- boards.cfg | 2 + drivers/mmc/tegra2_mmc.h | 2 - drivers/spi/Makefile | 1 + drivers/spi/tegra2_spi.c | 279 ++++++++++++++++++++ include/configs/harmony.h | 3 + include/configs/medcom.h | 64 +++++ include/configs/plutux.h | 64 +++++ include/configs/seaboard.h | 20 ++ include/configs/tegra2-common.h | 5 +- include/configs/ventana.h | 3 + 38 files changed, 1353 insertions(+), 73 deletions(-) create mode 100644 arch/arm/cpu/armv7/tegra2/funcmux.c create mode 100644 arch/arm/include/asm/arch-tegra2/board.h create mode 100644 arch/arm/include/asm/arch-tegra2/funcmux.h create mode 100644 arch/arm/include/asm/arch-tegra2/mmc.h create mode 100644 arch/arm/include/asm/arch-tegra2/tegra2_spi.h create mode 100644 arch/arm/include/asm/arch-tegra2/uart-spi-switch.h create mode 100644 board/avionic-design/common/tamonten.c create mode 100644 board/avionic-design/common/tamonten.h create mode 100644 board/avionic-design/medcom/Makefile create mode 100644 board/avionic-design/medcom/medcom.c create mode 100644 board/avionic-design/plutux/Makefile create mode 100644 board/avionic-design/plutux/plutux.c create mode 100644 board/nvidia/common/Makefile create mode 100644 board/nvidia/common/uart-spi-switch.c create mode 100644 drivers/spi/tegra2_spi.c create mode 100644 include/configs/medcom.h create mode 100644 include/configs/plutux.h > -----Original Message----- > From: Albert ARIBAUD [mailto:albert.u.boot at aribaud.net] > Sent: Thursday, December 22, 2011 3:51 PM > To: Tom Warren > Cc: Wolfgang Denk; u-boot at lists.denx.de > Subject: Re: Pull request: u-boot-tegra/next > > Le 22/12/2011 22:51, Tom Warren a ?crit : > > I did a 'git fetch git://git.denx.de/u-boot-arm.git', then rebased on > that, as per the Workflow for Custodian git Repos wiki page. But that gave > me a large number of changes in my pull request (most of which weren't my > recent ones). So I did (on Simon's advice): > > Note that the flow is for master branches, not next, although it can apply > on next as well if you request a pull of a next into a next. > > > git checkout -b next-try u-boot-arm/master git cherry-pick next~23, > > etc. for the commits I'd added since the last pull request. > > You should not have to cherry-pick. If your rebase does not fail, it should > leave your branch with only tour patches on it. However, cherry-picking > should work just as ok. Note BTW that you can cherry-pick a range, IIRC. > > > This resulted in a pull request w/just my commits, as below. So I make > 'next-try' my 'next' branch& pushed it to u-boot-tegra. > > Yet this does not tell me if you want it pushed on my next or master... > > > Note that I see this in my 'u-boot-arm' cloned repo, master branch: > > > > commit 4f1a2cd1637027f31de7796aedb1fa5fc0ec0f97 > > Merge: f8d2c65 953209b > > Author: Wolfgang Denk<wd@denx.de> > > Date: Mon Dec 12 07:56:41 2011 +0100 > > Is that what you see as 'u-boot-arm/master' ? Had you done a 'git fetch u- > boot-arm' (or whatever is your nickname for the ARM repo) before rebasing? > Because since dec 20, u-boot-arm/master is at commit > e570fe8ef2734fddc15e086b7bc344e64c907e81 -- and anyway, that is a commit by > Wolfgang to merge the ARM repo, not a commit *from* the ARM repo. > > > Merge branch 'master' of git://git.denx.de/u-boot-arm > > > > * 'master' of git://git.denx.de/u-boot-arm: > > arm: add __aeabi_unwind_cpp_pr1() function to avoid linker > complaints > > post: fix compile issue for post tests on kirkwood > > > > The second hash in the 'Merge: ...' line has the below commit #. Maybe > things diverged at some point? > > Things cannot diverge between u-boot and u-bot-arm, as I always rebase my > pull requests onto the latest u-boot master branch at the very time of the > request -- just like pull requests to ARM should always be done above the > current u-boot-arm/master. > > > Let me know how I can straighten this out. I'd like to get it in before I > leave for the holidays. > > My advice is: > > 1) Before requesting a pull, make sure you are rebased against the latest u- > boo-arm master and next branches by doing a 'git fetch u-boot-arm' (or > whatever your remote nickname for the ARM repo is; if you don't have a > remote nickname for it, then do a 'git fetch > git://git.denx.de/u-boot-arm') then a 'git rebase u-boot-arm/master' > (assuming your own master branch is checked out of course). > > I personally always use the commands > > git checkout master [that's my local ARM master branch] > git fetch u-boot [that syncs my local copy of u-boot/master] > git rebase u-boot/master [after that I'm good for a pull req] > > before a 'git request-pull'. > > 2) explicitly state which ARM branch the pull should be done into. If you > don't specify explicitly but the branch to pull from is master, I'll pull > into ARM master, but otherwise, I'll ask. > > > Thanks, > > np > > > Tom > > Amicalement, > -- > Albert. ----------------------------------------------------------------------------------- This email message is for the sole use of the intended recipient(s) and may contain confidential information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message. ----------------------------------------------------------------------------------- ^ permalink raw reply [flat|nested] 12+ messages in thread
* [U-Boot] Pull request: u-boot-tegra/next 2011-12-22 23:17 ` Tom Warren @ 2011-12-23 15:07 ` Albert ARIBAUD 2011-12-23 16:06 ` Wolfgang Denk 2011-12-23 22:15 ` Albert ARIBAUD 1 sibling, 1 reply; 12+ messages in thread From: Albert ARIBAUD @ 2011-12-23 15:07 UTC (permalink / raw) To: u-boot Hi Tom, Le 23/12/2011 00:17, Tom Warren a ?crit : > Alright, I hope I've gotten it right this time. I had already done a git fetch of the u-boot-arm master (see my very first sentence below), but regardless, I followed your 'always use commands' and I believe I've gotten a valid repo. It's pushed as both 'master' and 'next' to u-boot-tegra.git. > > Here's the pull request, please pull into arm master. Thanks. > > The following changes since commit e570fe8ef2734fddc15e086b7bc344e64c907e81: > > PXA: Kill last remnants of set_GPIO_mode function (2011-12-19 17:52:44 +0100) > > are available in the git repository at: > git://git.denx.de/u-boot-tegra.git master > > Simon Glass (14): > tegra2: Tidy UART selection > tegra2: Add UARTB support > tegra2: config: Enable SPI flash on Seaboard > tegra2: Enable SPI environment on Seaboard > tegra2: Implement SPI / UART GPIO switch > tegra2: spi: Support SPI / UART switch > tegra2: Plumb in SPI/UART switch code > tegra: Fix build error in plutux, medcom > tegra: Move cpu_init_cp15() to arch_cpu_init() > tegra: Move clock_early_init() to arch_cpu_init() > tegra: add clock_ll_start_uart() to enable UART prior to reloc > tegra: Add a function mux feature > tegra: Add support for UART init in cpu board.c > tegra: Move boards over to use arch-level board UART function > > Thierry Reding (7): > tegra2: Always build with USE_PRIVATE_LIBGCC=yes. > tegra2: Change CONFIG_SYS_TEXT_BASE to 0x00108000. > tegra2: Move tegra2_mmc_init() prototype to public header. > tegra2: Add common Avionic Design Tamonten support. > tegra2: Add Avionic Design Plutux support. > tegra2: Add Avionic Design Medcom support. > tegra2: Optimize out-of-tree build for Ventana. > > Tom Warren (2): > tegra2: spi: Add SPI driver for Tegra2 SOC > arm: Tegra: Fix Harmony and Ventana builds in u-boot-tegra/master > > MAINTAINERS | 5 + > arch/arm/cpu/armv7/tegra2/Makefile | 2 +- > arch/arm/cpu/armv7/tegra2/board.c | 58 ++++ > arch/arm/cpu/armv7/tegra2/clock.c | 14 + > arch/arm/cpu/armv7/tegra2/config.mk | 2 + > arch/arm/cpu/armv7/tegra2/funcmux.c | 58 ++++ > arch/arm/include/asm/arch-tegra2/board.h | 30 ++ > arch/arm/include/asm/arch-tegra2/clock.h | 11 + > arch/arm/include/asm/arch-tegra2/funcmux.h | 41 +++ > arch/arm/include/asm/arch-tegra2/mmc.h | 27 ++ > arch/arm/include/asm/arch-tegra2/tegra2.h | 1 + > arch/arm/include/asm/arch-tegra2/tegra2_spi.h | 76 ++++++ > arch/arm/include/asm/arch-tegra2/uart-spi-switch.h | 46 ++++ > board/avionic-design/common/tamonten.c | 116 ++++++++ > board/avionic-design/common/tamonten.h | 32 +++ > board/avionic-design/medcom/Makefile | 50 ++++ > board/avionic-design/medcom/medcom.c | 45 ++++ > board/avionic-design/plutux/Makefile | 50 ++++ > board/avionic-design/plutux/plutux.c | 45 ++++ > board/nvidia/common/Makefile | 47 ++++ > board/nvidia/common/board.c | 73 +---- > board/nvidia/common/board.h | 2 +- > board/nvidia/common/uart-spi-switch.c | 138 ++++++++++ > board/nvidia/harmony/Makefile | 1 - > board/nvidia/harmony/harmony.c | 2 +- > board/nvidia/seaboard/Makefile | 1 - > board/nvidia/seaboard/seaboard.c | 5 +- > board/nvidia/ventana/Makefile | 5 +- > boards.cfg | 2 + > drivers/mmc/tegra2_mmc.h | 2 - > drivers/spi/Makefile | 1 + > drivers/spi/tegra2_spi.c | 279 ++++++++++++++++++++ > include/configs/harmony.h | 3 + > include/configs/medcom.h | 64 +++++ > include/configs/plutux.h | 64 +++++ > include/configs/seaboard.h | 20 ++ > include/configs/tegra2-common.h | 5 +- > include/configs/ventana.h | 3 + > 38 files changed, 1353 insertions(+), 73 deletions(-) > create mode 100644 arch/arm/cpu/armv7/tegra2/funcmux.c > create mode 100644 arch/arm/include/asm/arch-tegra2/board.h > create mode 100644 arch/arm/include/asm/arch-tegra2/funcmux.h > create mode 100644 arch/arm/include/asm/arch-tegra2/mmc.h > create mode 100644 arch/arm/include/asm/arch-tegra2/tegra2_spi.h > create mode 100644 arch/arm/include/asm/arch-tegra2/uart-spi-switch.h > create mode 100644 board/avionic-design/common/tamonten.c > create mode 100644 board/avionic-design/common/tamonten.h > create mode 100644 board/avionic-design/medcom/Makefile > create mode 100644 board/avionic-design/medcom/medcom.c > create mode 100644 board/avionic-design/plutux/Makefile > create mode 100644 board/avionic-design/plutux/plutux.c > create mode 100644 board/nvidia/common/Makefile > create mode 100644 board/nvidia/common/uart-spi-switch.c > create mode 100644 drivers/spi/tegra2_spi.c > create mode 100644 include/configs/medcom.h > create mode 100644 include/configs/plutux.h The branch is now correctly based above u-boot-arm/master, However, not all commits are bug fixes. Can you reorganize so that all bugfixes are in u-boot-tegra-master, and all non-bugfixes are in .../next above .../master ? Amicalement, -- Albert. ^ permalink raw reply [flat|nested] 12+ messages in thread
* [U-Boot] Pull request: u-boot-tegra/next 2011-12-23 15:07 ` Albert ARIBAUD @ 2011-12-23 16:06 ` Wolfgang Denk 2011-12-23 17:12 ` Albert ARIBAUD 0 siblings, 1 reply; 12+ messages in thread From: Wolfgang Denk @ 2011-12-23 16:06 UTC (permalink / raw) To: u-boot Dear Albert, In message <4EF49931.7090102@aribaud.net> you wrote: > > The branch is now correctly based above u-boot-arm/master, However, not > all commits are bug fixes. Can you reorganize so that all bugfixes are > in u-boot-tegra-master, and all non-bugfixes are in .../next above > .../master ? I suggest we don't wait any longer. There has been more than enough thime to get things fixed, and instead of adding lots of untested stuff I rather pull this into the next release. If you have anything else queued up, then please send your pull request ASAP. We skip the tegra stuff. Thanks a lot! Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de ... Jesus cried with a loud voice: Lazarus, come forth; the bug hath been found and thy program runneth. And he that was dead came forth... -- John 11:43-44 [version 2.0?] ^ permalink raw reply [flat|nested] 12+ messages in thread
* [U-Boot] Pull request: u-boot-tegra/next 2011-12-23 16:06 ` Wolfgang Denk @ 2011-12-23 17:12 ` Albert ARIBAUD 2011-12-23 18:30 ` Wolfgang Denk 0 siblings, 1 reply; 12+ messages in thread From: Albert ARIBAUD @ 2011-12-23 17:12 UTC (permalink / raw) To: u-boot Le 23/12/2011 17:06, Wolfgang Denk a ?crit : > Dear Albert, > > In message<4EF49931.7090102@aribaud.net> you wrote: >> >> The branch is now correctly based above u-boot-arm/master, However, not >> all commits are bug fixes. Can you reorganize so that all bugfixes are >> in u-boot-tegra-master, and all non-bugfixes are in .../next above >> .../master ? > > I suggest we don't wait any longer. There has been more than enough > thime to get things fixed, and instead of adding lots of untested > stuff I rather pull this into the next release. > > If you have anything else queued up, then please send your pull > request ASAP. We skip the tegra stuff. Right now I have nothing left on master for you to pull. Accordingly, I'll pull the tegra repo into next. > Thanks a lot! > > Best regards, > > Wolfgang Denk Regards, Albert. Amicalement, -- Albert. ^ permalink raw reply [flat|nested] 12+ messages in thread
* [U-Boot] Pull request: u-boot-tegra/next 2011-12-23 17:12 ` Albert ARIBAUD @ 2011-12-23 18:30 ` Wolfgang Denk 0 siblings, 0 replies; 12+ messages in thread From: Wolfgang Denk @ 2011-12-23 18:30 UTC (permalink / raw) To: u-boot Dear Albert ARIBAUD, In message <4EF4B68D.9020100@aribaud.net> you wrote: > > > If you have anything else queued up, then please send your pull > > request ASAP. We skip the tegra stuff. > > Right now I have nothing left on master for you to pull. > > Accordingly, I'll pull the tegra repo into next. Thanks! Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de History tends to exaggerate. -- Col. Green, "The Savage Curtain", stardate 5906.4 ^ permalink raw reply [flat|nested] 12+ messages in thread
* [U-Boot] Pull request: u-boot-tegra/next 2011-12-22 23:17 ` Tom Warren 2011-12-23 15:07 ` Albert ARIBAUD @ 2011-12-23 22:15 ` Albert ARIBAUD 1 sibling, 0 replies; 12+ messages in thread From: Albert ARIBAUD @ 2011-12-23 22:15 UTC (permalink / raw) To: u-boot Hi Tom, Le 23/12/2011 00:17, Tom Warren a ?crit : > Alright, I hope I've gotten it right this time. I had already done a git fetch of the u-boot-arm master (see my very first sentence below), but regardless, I followed your 'always use commands' and I believe I've gotten a valid repo. It's pushed as both 'master' and 'next' to u-boot-tegra.git. > > Here's the pull request, please pull into arm master. Thanks. > > The following changes since commit e570fe8ef2734fddc15e086b7bc344e64c907e81: > > PXA: Kill last remnants of set_GPIO_mode function (2011-12-19 17:52:44 +0100) > > are available in the git repository at: > git://git.denx.de/u-boot-tegra.git master > > Simon Glass (14): > tegra2: Tidy UART selection > tegra2: Add UARTB support > tegra2: config: Enable SPI flash on Seaboard > tegra2: Enable SPI environment on Seaboard > tegra2: Implement SPI / UART GPIO switch > tegra2: spi: Support SPI / UART switch > tegra2: Plumb in SPI/UART switch code > tegra: Fix build error in plutux, medcom > tegra: Move cpu_init_cp15() to arch_cpu_init() > tegra: Move clock_early_init() to arch_cpu_init() > tegra: add clock_ll_start_uart() to enable UART prior to reloc > tegra: Add a function mux feature > tegra: Add support for UART init in cpu board.c > tegra: Move boards over to use arch-level board UART function > > Thierry Reding (7): > tegra2: Always build with USE_PRIVATE_LIBGCC=yes. > tegra2: Change CONFIG_SYS_TEXT_BASE to 0x00108000. > tegra2: Move tegra2_mmc_init() prototype to public header. > tegra2: Add common Avionic Design Tamonten support. > tegra2: Add Avionic Design Plutux support. > tegra2: Add Avionic Design Medcom support. > tegra2: Optimize out-of-tree build for Ventana. > > Tom Warren (2): > tegra2: spi: Add SPI driver for Tegra2 SOC > arm: Tegra: Fix Harmony and Ventana builds in u-boot-tegra/master > > MAINTAINERS | 5 + > arch/arm/cpu/armv7/tegra2/Makefile | 2 +- > arch/arm/cpu/armv7/tegra2/board.c | 58 ++++ > arch/arm/cpu/armv7/tegra2/clock.c | 14 + > arch/arm/cpu/armv7/tegra2/config.mk | 2 + > arch/arm/cpu/armv7/tegra2/funcmux.c | 58 ++++ > arch/arm/include/asm/arch-tegra2/board.h | 30 ++ > arch/arm/include/asm/arch-tegra2/clock.h | 11 + > arch/arm/include/asm/arch-tegra2/funcmux.h | 41 +++ > arch/arm/include/asm/arch-tegra2/mmc.h | 27 ++ > arch/arm/include/asm/arch-tegra2/tegra2.h | 1 + > arch/arm/include/asm/arch-tegra2/tegra2_spi.h | 76 ++++++ > arch/arm/include/asm/arch-tegra2/uart-spi-switch.h | 46 ++++ > board/avionic-design/common/tamonten.c | 116 ++++++++ > board/avionic-design/common/tamonten.h | 32 +++ > board/avionic-design/medcom/Makefile | 50 ++++ > board/avionic-design/medcom/medcom.c | 45 ++++ > board/avionic-design/plutux/Makefile | 50 ++++ > board/avionic-design/plutux/plutux.c | 45 ++++ > board/nvidia/common/Makefile | 47 ++++ > board/nvidia/common/board.c | 73 +---- > board/nvidia/common/board.h | 2 +- > board/nvidia/common/uart-spi-switch.c | 138 ++++++++++ > board/nvidia/harmony/Makefile | 1 - > board/nvidia/harmony/harmony.c | 2 +- > board/nvidia/seaboard/Makefile | 1 - > board/nvidia/seaboard/seaboard.c | 5 +- > board/nvidia/ventana/Makefile | 5 +- > boards.cfg | 2 + > drivers/mmc/tegra2_mmc.h | 2 - > drivers/spi/Makefile | 1 + > drivers/spi/tegra2_spi.c | 279 ++++++++++++++++++++ > include/configs/harmony.h | 3 + > include/configs/medcom.h | 64 +++++ > include/configs/plutux.h | 64 +++++ > include/configs/seaboard.h | 20 ++ > include/configs/tegra2-common.h | 5 +- > include/configs/ventana.h | 3 + > 38 files changed, 1353 insertions(+), 73 deletions(-) > create mode 100644 arch/arm/cpu/armv7/tegra2/funcmux.c > create mode 100644 arch/arm/include/asm/arch-tegra2/board.h > create mode 100644 arch/arm/include/asm/arch-tegra2/funcmux.h > create mode 100644 arch/arm/include/asm/arch-tegra2/mmc.h > create mode 100644 arch/arm/include/asm/arch-tegra2/tegra2_spi.h > create mode 100644 arch/arm/include/asm/arch-tegra2/uart-spi-switch.h > create mode 100644 board/avionic-design/common/tamonten.c > create mode 100644 board/avionic-design/common/tamonten.h > create mode 100644 board/avionic-design/medcom/Makefile > create mode 100644 board/avionic-design/medcom/medcom.c > create mode 100644 board/avionic-design/plutux/Makefile > create mode 100644 board/avionic-design/plutux/plutux.c > create mode 100644 board/nvidia/common/Makefile > create mode 100644 board/nvidia/common/uart-spi-switch.c > create mode 100644 drivers/spi/tegra2_spi.c > create mode 100644 include/configs/medcom.h > create mode 100644 include/configs/plutux.h As discussed with Wolfgang, applied to u-boot-arm/next, thanks. Amicalement, -- Albert. ^ permalink raw reply [flat|nested] 12+ messages in thread
* [U-Boot] Pull request: u-boot-tegra/next 2011-12-22 20:59 [U-Boot] Pull request: u-boot-tegra/next Tom Warren 2011-12-22 21:07 ` Albert ARIBAUD @ 2011-12-22 21:08 ` Stephen Warren 2011-12-22 21:53 ` Tom Warren 1 sibling, 1 reply; 12+ messages in thread From: Stephen Warren @ 2011-12-22 21:08 UTC (permalink / raw) To: u-boot Tom Warren wrote at Thursday, December 22, 2011 2:00 PM: > Please pull u-boot-tegra/next. Thanks. Happy holidays! > > The following changes since commit 953209bf5ef0889a1baa02aa0ed5324f53ff8fda: > > arm: add __aeabi_unwind_cpp_pr1() function to avoid linker complaints (2011-12-11 13:56:57 +0100) ... > Stephen Warren (1): > tegra2: Enable CONFIG_SYS_RELATIVE_IMAGES This is harmless, but useless now; it enables a feature for which the patches were rejected and reworked in a way that doesn't require boards to define a config option. Sorry for not taking a look at your branch and catching this earlier. -- nvpublic ^ permalink raw reply [flat|nested] 12+ messages in thread
* [U-Boot] Pull request: u-boot-tegra/next 2011-12-22 21:08 ` Stephen Warren @ 2011-12-22 21:53 ` Tom Warren 0 siblings, 0 replies; 12+ messages in thread From: Tom Warren @ 2011-12-22 21:53 UTC (permalink / raw) To: u-boot Stephen, > -----Original Message----- > From: Stephen Warren > Sent: Thursday, December 22, 2011 2:08 PM > To: Tom Warren; Albert ARIBAUD > Cc: u-boot at lists.denx.de > Subject: RE: Pull request: u-boot-tegra/next > > Tom Warren wrote at Thursday, December 22, 2011 2:00 PM: > > Please pull u-boot-tegra/next. Thanks. Happy holidays! > > > > The following changes since commit > 953209bf5ef0889a1baa02aa0ed5324f53ff8fda: > > > > arm: add __aeabi_unwind_cpp_pr1() function to avoid linker > > complaints (2011-12-11 13:56:57 +0100) > ... > > Stephen Warren (1): > > tegra2: Enable CONFIG_SYS_RELATIVE_IMAGES > > This is harmless, but useless now; it enables a feature for which the > patches were rejected and reworked in a way that doesn't require boards to > define a config option. > > Sorry for not taking a look at your branch and catching this earlier. OK. I can revert it once I figure out how to get Albert a valid pull request. > > -- > nvpublic ^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2011-12-23 22:15 UTC | newest] Thread overview: 12+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2011-12-22 20:59 [U-Boot] Pull request: u-boot-tegra/next Tom Warren 2011-12-22 21:07 ` Albert ARIBAUD 2011-12-22 21:51 ` Tom Warren 2011-12-22 22:51 ` Albert ARIBAUD 2011-12-22 23:17 ` Tom Warren 2011-12-23 15:07 ` Albert ARIBAUD 2011-12-23 16:06 ` Wolfgang Denk 2011-12-23 17:12 ` Albert ARIBAUD 2011-12-23 18:30 ` Wolfgang Denk 2011-12-23 22:15 ` Albert ARIBAUD 2011-12-22 21:08 ` Stephen Warren 2011-12-22 21:53 ` Tom Warren
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox