From: Albert ARIBAUD <albert.u.boot@aribaud.net>
To: u-boot@lists.denx.de
Subject: [U-Boot] Pull request: u-boot-tegra/next
Date: Fri, 23 Dec 2011 23:15:47 +0100 [thread overview]
Message-ID: <4EF4FD93.1040100@aribaud.net> (raw)
In-Reply-To: <7E91C59574E9954FA075F8D8CCDF78DB3A2037F222@HQMAIL04.nvidia.com>
Hi Tom,
Le 23/12/2011 00:17, Tom Warren a ?crit :
> Alright, I hope I've gotten it right this time. I had already done a git fetch of the u-boot-arm master (see my very first sentence below), but regardless, I followed your 'always use commands' and I believe I've gotten a valid repo. It's pushed as both 'master' and 'next' to u-boot-tegra.git.
>
> Here's the pull request, please pull into arm master. Thanks.
>
> The following changes since commit e570fe8ef2734fddc15e086b7bc344e64c907e81:
>
> PXA: Kill last remnants of set_GPIO_mode function (2011-12-19 17:52:44 +0100)
>
> are available in the git repository at:
> git://git.denx.de/u-boot-tegra.git master
>
> Simon Glass (14):
> tegra2: Tidy UART selection
> tegra2: Add UARTB support
> tegra2: config: Enable SPI flash on Seaboard
> tegra2: Enable SPI environment on Seaboard
> tegra2: Implement SPI / UART GPIO switch
> tegra2: spi: Support SPI / UART switch
> tegra2: Plumb in SPI/UART switch code
> tegra: Fix build error in plutux, medcom
> tegra: Move cpu_init_cp15() to arch_cpu_init()
> tegra: Move clock_early_init() to arch_cpu_init()
> tegra: add clock_ll_start_uart() to enable UART prior to reloc
> tegra: Add a function mux feature
> tegra: Add support for UART init in cpu board.c
> tegra: Move boards over to use arch-level board UART function
>
> Thierry Reding (7):
> tegra2: Always build with USE_PRIVATE_LIBGCC=yes.
> tegra2: Change CONFIG_SYS_TEXT_BASE to 0x00108000.
> tegra2: Move tegra2_mmc_init() prototype to public header.
> tegra2: Add common Avionic Design Tamonten support.
> tegra2: Add Avionic Design Plutux support.
> tegra2: Add Avionic Design Medcom support.
> tegra2: Optimize out-of-tree build for Ventana.
>
> Tom Warren (2):
> tegra2: spi: Add SPI driver for Tegra2 SOC
> arm: Tegra: Fix Harmony and Ventana builds in u-boot-tegra/master
>
> MAINTAINERS | 5 +
> arch/arm/cpu/armv7/tegra2/Makefile | 2 +-
> arch/arm/cpu/armv7/tegra2/board.c | 58 ++++
> arch/arm/cpu/armv7/tegra2/clock.c | 14 +
> arch/arm/cpu/armv7/tegra2/config.mk | 2 +
> arch/arm/cpu/armv7/tegra2/funcmux.c | 58 ++++
> arch/arm/include/asm/arch-tegra2/board.h | 30 ++
> arch/arm/include/asm/arch-tegra2/clock.h | 11 +
> arch/arm/include/asm/arch-tegra2/funcmux.h | 41 +++
> arch/arm/include/asm/arch-tegra2/mmc.h | 27 ++
> arch/arm/include/asm/arch-tegra2/tegra2.h | 1 +
> arch/arm/include/asm/arch-tegra2/tegra2_spi.h | 76 ++++++
> arch/arm/include/asm/arch-tegra2/uart-spi-switch.h | 46 ++++
> board/avionic-design/common/tamonten.c | 116 ++++++++
> board/avionic-design/common/tamonten.h | 32 +++
> board/avionic-design/medcom/Makefile | 50 ++++
> board/avionic-design/medcom/medcom.c | 45 ++++
> board/avionic-design/plutux/Makefile | 50 ++++
> board/avionic-design/plutux/plutux.c | 45 ++++
> board/nvidia/common/Makefile | 47 ++++
> board/nvidia/common/board.c | 73 +----
> board/nvidia/common/board.h | 2 +-
> board/nvidia/common/uart-spi-switch.c | 138 ++++++++++
> board/nvidia/harmony/Makefile | 1 -
> board/nvidia/harmony/harmony.c | 2 +-
> board/nvidia/seaboard/Makefile | 1 -
> board/nvidia/seaboard/seaboard.c | 5 +-
> board/nvidia/ventana/Makefile | 5 +-
> boards.cfg | 2 +
> drivers/mmc/tegra2_mmc.h | 2 -
> drivers/spi/Makefile | 1 +
> drivers/spi/tegra2_spi.c | 279 ++++++++++++++++++++
> include/configs/harmony.h | 3 +
> include/configs/medcom.h | 64 +++++
> include/configs/plutux.h | 64 +++++
> include/configs/seaboard.h | 20 ++
> include/configs/tegra2-common.h | 5 +-
> include/configs/ventana.h | 3 +
> 38 files changed, 1353 insertions(+), 73 deletions(-)
> create mode 100644 arch/arm/cpu/armv7/tegra2/funcmux.c
> create mode 100644 arch/arm/include/asm/arch-tegra2/board.h
> create mode 100644 arch/arm/include/asm/arch-tegra2/funcmux.h
> create mode 100644 arch/arm/include/asm/arch-tegra2/mmc.h
> create mode 100644 arch/arm/include/asm/arch-tegra2/tegra2_spi.h
> create mode 100644 arch/arm/include/asm/arch-tegra2/uart-spi-switch.h
> create mode 100644 board/avionic-design/common/tamonten.c
> create mode 100644 board/avionic-design/common/tamonten.h
> create mode 100644 board/avionic-design/medcom/Makefile
> create mode 100644 board/avionic-design/medcom/medcom.c
> create mode 100644 board/avionic-design/plutux/Makefile
> create mode 100644 board/avionic-design/plutux/plutux.c
> create mode 100644 board/nvidia/common/Makefile
> create mode 100644 board/nvidia/common/uart-spi-switch.c
> create mode 100644 drivers/spi/tegra2_spi.c
> create mode 100644 include/configs/medcom.h
> create mode 100644 include/configs/plutux.h
As discussed with Wolfgang, applied to u-boot-arm/next, thanks.
Amicalement,
--
Albert.
next prev parent reply other threads:[~2011-12-23 22:15 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-12-22 20:59 [U-Boot] Pull request: u-boot-tegra/next Tom Warren
2011-12-22 21:07 ` Albert ARIBAUD
2011-12-22 21:51 ` Tom Warren
2011-12-22 22:51 ` Albert ARIBAUD
2011-12-22 23:17 ` Tom Warren
2011-12-23 15:07 ` Albert ARIBAUD
2011-12-23 16:06 ` Wolfgang Denk
2011-12-23 17:12 ` Albert ARIBAUD
2011-12-23 18:30 ` Wolfgang Denk
2011-12-23 22:15 ` Albert ARIBAUD [this message]
2011-12-22 21:08 ` Stephen Warren
2011-12-22 21:53 ` Tom Warren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4EF4FD93.1040100@aribaud.net \
--to=albert.u.boot@aribaud.net \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox