From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Wed, 28 Dec 2011 13:36:44 +0100 Subject: [U-Boot] [PATCH v6 4/4] mx28evk: Add initial support for MX28EVK board In-Reply-To: References: <1324389212-9208-1-git-send-email-festevam@gmail.com> <1324389212-9208-4-git-send-email-festevam@gmail.com> <201112201458.15830.marek.vasut@gmail.com> Message-ID: <4EFB0D5C.8080909@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 28/12/2011 13:20, Fabio Estevam wrote: > Hi Stefano, > > On Tue, Dec 20, 2011 at 11:58 AM, Marek Vasut wrote: >>> Add initial support for Freescale MX28EVK board. >>> >>> Tested boot via SD card and by loading a kernel via TFTP through >>> the FEC interface. >>> >>> Signed-off-by: Fabio Estevam > ... >> Acked-by: Marek Vasut > > Does the mx28evk patch series look fine now? Hi Fabio, there are still open answers from me and Marek for the first patch: mx28: Let imx_get_mac_from_fuse be common for mx28 My main concern is that I dislike to have a new function name only for the MX.28, and I would like to maintain the same set of functions for all i.MX SOCs. The rest of the patchset is ok for me, I will send also my Ack. Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de =====================================================================