public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Holger Brunck <holger.brunck@keymile.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] Bug#655102: v2011.12 and later do not boot on dreamplug.
Date: Mon, 09 Jan 2012 11:59:51 +0100	[thread overview]
Message-ID: <4F0AC8A7.10103@keymile.com> (raw)
In-Reply-To: <1326052145.29084.72.camel@dagon.hellion.org.uk>

On 01/08/2012 09:00 PM, Ian Campbell wrote:
> On Sun, 2012-01-08 at 15:30 +0000, Ian Campbell wrote:
>> v2011.12 hangs on boot on my dreamplug with:
>>
>>         U-Boot 2011.12-dirty (Jan 08 2012 - 15:16:44)
>>         Marvell-DreamPlug
>>         
>>         SoC:   Kirkwood 88F6281_A1
>>         DRAM:  512 MiB
>>         WARNING: Caches not enabled
>>
>> I bisected it down to:
>>         commit ca4b55800ed74207c35271bf7335a092d4955416
>>         Author: Heiko Schocher <hs@denx.de>
>>         Date:   Wed Nov 9 20:06:23 2011 +0000
>>         
>>             arm, arm926ejs: always do cpu critical inits
>>             
>>             always do the cpu critical inits in cpu_init_crit,
>>             and only jump to lowlevel_init, if CONFIG_SKIP_LOWLEVEL_INIT
>>             is not defined.
>>             
>>             Signed-off-by: Heiko Schocher <hs@denx.de>
>>             Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
>>             Cc: Wolfgang Denk <hs@denx.de>
>>             Cc: Sandeep Paulraj <s-paulraj@ti.com>
>>             Cc: Tom Rini <tom.rini@gmail.com>
>>             Cc: Christian Riesch <christian.riesch@omicron.at>
>>
>> and in particular the line
>> 	orr	r0, r0, #0x00000002	/* set bit 2 (A) Align */
>>
>> Commenting out just that one line causes things to work. Is the error
>> setting this bit or is it that there is a bug somewhere else which
>> prevents us setting this bit?
> 
> Seem that the latter is the case. The following fixes it for me.
> 
> (BTW, my mails to u-boot@ seem to be getting moderated, even though I am
> subscribed, is that normal?)
> 
> 8<-------------------------------------------------------------
> 
> From d6bc6e1a4f49314577e0be9af3cd020078593fdb Mon Sep 17 00:00:00 2001
> From: Ian Campbell <ijc@hellion.org.uk>
> Date: Sun, 8 Jan 2012 19:44:38 +0000
> Subject: [PATCH] kirkwood_spi: correct access to irq_mask register
> 
> Problem appears to have been present since day one but masked because alignment
> aborts were not enabled. ca4b55800ed7 "arm, arm926ejs: always do cpu critical
> inits" turned on alignment aborts and uncovered this latent problem.
> 
> Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
> ---
>  drivers/spi/kirkwood_spi.c |    2 +-
>  1 files changed, 1 insertions(+), 1 deletions(-)
> 
> diff --git a/drivers/spi/kirkwood_spi.c b/drivers/spi/kirkwood_spi.c
> index dfe542d..db8ba8b 100644
> --- a/drivers/spi/kirkwood_spi.c
> +++ b/drivers/spi/kirkwood_spi.c
> @@ -66,7 +66,7 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
>  	debug("data = 0x%08x \n", data);
>  
>  	writel(KWSPI_SMEMRDIRQ, &spireg->irq_cause);
> -	writel(KWSPI_IRQMASK, spireg->irq_mask);
> +	writel(KWSPI_IRQMASK, &spireg->irq_mask);
>  
>  	/* program mpp registers to select  SPI_CSn */
>  	if (cs) {

we had also SPI problems on our km_kirkwood boards with u-boot v2011.12. This
patch fixes it. Thanks! So:

Tested-By: Holger Brunck <holger.brunck@keymile.com>

Regards
Holger

  parent reply	other threads:[~2012-01-09 10:59 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-01-08 15:30 [U-Boot] v2011.12 and later do not boot on dreamplug Ian Campbell
2012-01-08 15:35 ` Ian Campbell
2012-01-08 19:49 ` Ian Campbell
2012-01-08 22:54   ` Jason
2012-01-12  8:01     ` Ian Campbell
2012-01-12 15:11       ` Jason
2012-01-09 10:59   ` Holger Brunck [this message]
2012-01-12 16:10   ` [U-Boot] [PATCH] kirkwood_spi: correct access to irq_mask register Ian Campbell
2012-01-12 16:22     ` Prafulla Wadaskar
2012-01-12 16:56       ` Ian Campbell
2012-01-27 16:34       ` Ian Campbell
2012-02-08  9:54         ` Prafulla Wadaskar
2012-02-09  6:30           ` Ian Campbell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4F0AC8A7.10103@keymile.com \
    --to=holger.brunck@keymile.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox