[U-Boot] [PATCH v2] add nand spl boot for qi_lb60 board

[Xiangfu Liu <xiangfu@openmobilefree.net>]

Hi Scott

thanks for your comments. PATCH v3 have sent out for you to review.

On 01/07/2012 06:36 AM, Scott Wood wrote:
> We are transitioning from nand_spl/ to spl/.  Please try to work within
> the new infrastructure.  You may run into problems with size in spl/,
> due to gc-sections not removing strings on components you don't need --
> I plan to fix those issues (for NAND), hopefully this merge window, by
> requiring all files to be explicitly asked for.  Feel free to fix them
> first if you'd like. :-)
>

I'd like to move the new spl/. I have one question about the new spl/
I didn't see the new spl/ link to nand_spl/nand_boot.c. so how the new
spl/ using nand_boot()?

can we add a new define 'CONFIG_SPL_START_S_NAME', since qi_lb60 using
start_spl.S for SPL, not start.S.

I think better I make the nand_spl/ working. then move to the new spl/ :)

>> +include $(TOPDIR)/config.mk
>> +
>> +LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds
>> +LDFLAGS	= -Bstatic -T $(LDSCRIPT) -Ttext $(CONFIG_NAND_SPL_TEXT_BASE)
>> +AFLAGS	+= -DCONFIG_NAND_SPL
>> +CFLAGS	+= -DCONFIG_NAND_SPL -O2
>
> Why -O2 and not the -Os that you should already be inheriting from
> config.mk?

when I remove the -O2. it give me error:
  jz4740.c:(.text.sdram_init+0x14): undefined reference to `memcpy'
so I keep the -O2 there. please anyone give me some advice on how to fix this.
that will be great.

thanks again
xiangfu