From: Stephen Warren <swarren@nvidia.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 07/14] tegra: Add PMU to manage power supplies
Date: Tue, 10 Jan 2012 10:56:55 -0700 [thread overview]
Message-ID: <4F0C7BE7.9060201@nvidia.com> (raw)
In-Reply-To: <1324927987-13100-8-git-send-email-sjg@chromium.org>
On 12/26/2011 12:33 PM, Simon Glass wrote:
> From: Jimmy Zhang <jimmzhang@nvidia.com>
>
> Power supplies must be adjusted in line with clock frequency. This code
> provides a simple routine to set the voltage to allow operation at maximum
> frequency.
>
> Signed-off-by: Simon Glass <sjg@chromium.org>
> ---
> arch/arm/cpu/armv7/tegra2/Makefile | 1 +
> arch/arm/cpu/armv7/tegra2/pmu.c | 355 ++++++++++++++++++++++++++++++++
> arch/arm/include/asm/arch-tegra2/pmu.h | 63 ++++++
> 3 files changed, 419 insertions(+), 0 deletions(-)
> create mode 100644 arch/arm/cpu/armv7/tegra2/pmu.c
> create mode 100644 arch/arm/include/asm/arch-tegra2/pmu.h
This driver appears to be for an I2C-based device, so I assume it'd for
a particular PMIC not Tegra's PMC HW module. I imagine this is a driver
for the TI TPS6586X, right?
As such, naming this "pmu" and putting it into the Tegra directory
doesn't make sense. There should be a generic TPS6586X driver, and
possibly a separate file and patch to implement the use of that chip in
conjunction with Tegra.
--
nvpublic
next prev parent reply other threads:[~2012-01-10 17:56 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-12-26 19:32 [U-Boot] [PATCH 0/14] tegra: warmboot (suspend / resume) support Simon Glass
2011-12-26 19:32 ` [U-Boot] [PATCH 01/14] Add AES crypto library Simon Glass
2012-01-08 5:49 ` Mike Frysinger
2012-01-08 8:57 ` Marek Vasut
2012-01-08 9:09 ` Mike Frysinger
2012-01-08 10:40 ` Marek Vasut
2012-01-08 16:35 ` Simon Glass
2011-12-26 19:32 ` [U-Boot] [PATCH 02/14] tegra: Move ap20.h header into arch location Simon Glass
2011-12-26 19:32 ` [U-Boot] [PATCH 03/14] tegra: Add crypto library for warmboot code Simon Glass
2012-01-08 5:51 ` Mike Frysinger
2012-01-08 16:42 ` Simon Glass
2011-12-26 19:32 ` [U-Boot] [PATCH 04/14] tegra: Add flow, gp_padctl, fuse, sdram headers Simon Glass
2011-12-26 19:32 ` [U-Boot] [PATCH 05/14] tegra: Add tegra_get_chip_type() to detect SKU Simon Glass
2012-01-09 23:24 ` Stephen Warren
2012-01-12 19:35 ` Simon Glass
2012-01-12 19:48 ` Stephen Warren
2012-01-13 21:06 ` Simon Glass
2011-12-26 19:32 ` [U-Boot] [PATCH 06/14] tegra: Add EMC support for optimal memory timings Simon Glass
2012-01-09 23:38 ` Stephen Warren
2012-01-12 20:43 ` Simon Glass
2012-01-13 17:47 ` Simon Glass
2011-12-26 19:33 ` [U-Boot] [PATCH 07/14] tegra: Add PMU to manage power supplies Simon Glass
2012-01-10 17:56 ` Stephen Warren [this message]
2012-01-12 23:17 ` Simon Glass
2012-01-12 23:43 ` Stephen Warren
2012-01-12 23:55 ` Simon Glass
2011-12-26 19:33 ` [U-Boot] [PATCH 08/14] tegra: Set up PMU for Nvidia boards Simon Glass
2012-01-10 18:02 ` Stephen Warren
2012-01-12 23:42 ` Simon Glass
2011-12-26 19:33 ` [U-Boot] [PATCH 09/14] tegra: Add warmboot implementation Simon Glass
2012-01-10 18:30 ` Stephen Warren
2012-01-13 19:34 ` Simon Glass
2012-01-13 22:04 ` Yen Lin
2012-01-13 23:05 ` Simon Glass
2012-01-13 23:08 ` Stephen Warren
2012-01-14 0:04 ` Yen Lin
2011-12-26 19:33 ` [U-Boot] [PATCH 10/14] tegra: Setup PMC scratch info from ap20 setup Simon Glass
2011-12-26 19:33 ` [U-Boot] [PATCH 11/14] tegra: Set up warmboot code on Nvidia boards Simon Glass
2011-12-26 19:33 ` [U-Boot] [PATCH 12/14] tegra: Set vdd_core and vdd_cpu to high Simon Glass
2012-01-10 18:40 ` Stephen Warren
2012-01-13 17:55 ` Simon Glass
2011-12-26 19:33 ` [U-Boot] [PATCH 13/14] tegra: Add EMC settings for Seaboard, Harmony Simon Glass
2012-01-10 18:46 ` Stephen Warren
2012-01-12 23:05 ` Simon Glass
2012-01-12 23:42 ` Stephen Warren
2012-01-12 23:54 ` Simon Glass
2012-01-13 0:01 ` Stephen Warren
2012-01-13 0:05 ` Simon Glass
2012-01-13 0:10 ` Stephen Warren
2012-01-13 0:18 ` Simon Glass
2011-12-26 19:33 ` [U-Boot] [PATCH 14/14] tegra: Enable LP0 on Seaboard Simon Glass
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4F0C7BE7.9060201@nvidia.com \
--to=swarren@nvidia.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox