From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Fri, 13 Jan 2012 09:17:52 +0100 Subject: [U-Boot] mx28evk_config integration In-Reply-To: <68CF423E-FBC3-4E40-91BB-737C36E8CB73@Delien.nl> References: <68CF423E-FBC3-4E40-91BB-737C36E8CB73@Delien.nl> Message-ID: <4F0FE8B0.20905@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 12/01/2012 23:07, Robert Deli?n wrote: > Hi Stefano, > Hi Robert, > Can I post a patch for your u-boot-imx tree with my integration of extra > subsystems for the mx28evk board, or should I wait until your work on > mx28evk_config is in the mainline? Of course you can post patches ! Any fix is always high appreciated ! > > By the way, I have the stranges issue with both your mx28evk_config, > Marek's m28evk_config and my combined version: When I'm booting > a Kernel that works perfectly well with the old FreeScale 2009.08 U-boot, > the Kernel just hang during the boot process. It seems like something > goes wrong in emi_set_rate in the Kernel. If you could point me into the > right direction, I'd really appreciate it. Exactly which kernel version ? Do you tried with mainline kernel ? The board is officially supported in mainline. Can you test with a 3.2+ kernel ? Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de =====================================================================