From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Fri, 13 Jan 2012 14:06:21 +0100 Subject: [U-Boot] mx28evk_config integration In-Reply-To: <24DADD1F-D062-49F5-9926-A0070169EC5C@delien.nl> References: <68CF423E-FBC3-4E40-91BB-737C36E8CB73@Delien.nl> <4F0FE8B0.20905@denx.de> <5A6714A2-479A-4D24-BFC6-4A3236C4C4F8@delien.nl> <201201131349.27511.marek.vasut@gmail.com> <24DADD1F-D062-49F5-9926-A0070169EC5C@delien.nl> Message-ID: <4F102C4D.4030200@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 13/01/2012 13:56, Robert Deli?n wrote: >> Looks like CPUfreq+usb is doing something eerie ... Fabio, can you look into it? > > I've Kernel 3.2.1 and it works. So I've made a clean-built of my 3.1.6 and works > too. No idea why it failed before, but I'm going to disregard that for now. I think > it's safe to conclude that the problem is an incompatibility between the > FreeScale supplied 2.6.35.3-571 Kernel and the current version of U-Boot. This is possible, but both are not mainlined.. > > Unfortunately we cannot step up to another Kernel because we need the > FreeScale power supply driver for our battery and that's not yet supported in > later Kernel versions. However, the logical approach is to port the power supply driver to the current kernel, and also to push it to mainline ! Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de =====================================================================