From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Sat, 14 Jan 2012 10:48:12 +0100 Subject: [U-Boot] [PATCH V3 2/2] ARM: omap3: add support to Technexion twister board In-Reply-To: <4F11410F.5000004@aribaud.net> References: <1322040416-11751-2-git-send-email-sbabic@denx.de> <1322733413-13242-1-git-send-email-sbabic@denx.de> <1322733413-13242-2-git-send-email-sbabic@denx.de> <4F11410F.5000004@aribaud.net> Message-ID: <4F114F5C.8040906@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 14/01/2012 09:47, Albert ARIBAUD wrote: > (re-sent due to the U-Boot MX rejecting my provider's servers -- again) > > Hi Stefano, > Hi Albert, hi Tom, >> drivers/usb/host/libusb_host.o: In function `usb_lowlevel_init': >> /home/uboot/src/u-boot-arm/drivers/usb/host/ehci-hcd.c:814: undefined >> reference to `ehci_hcd_init' The twister board depends on several patches for the AM3517 processor previously senty by Ilya Yanok. One of them (maybe because it is USB related and should go into u-boot-usb) is missing. http://patchwork.ozlabs.org/patch/130952/ The patch is set to new and assigned to Remy, but he gived up as maintainer - nobody checks at it ;-(. I can at least sent my tested-by - it was nice if you can pick it up. Best regards, Stefano -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de =====================================================================