From mboxrd@z Thu Jan 1 00:00:00 1970 From: Albert ARIBAUD Date: Mon, 16 Jan 2012 13:49:18 +0100 Subject: [U-Boot] [PATCH 0/4] Add USB support to orion5x and edminiv2 In-Reply-To: References: <1326701321-28185-1-git-send-email-albert.u.boot@aribaud.net> <4F13DFFA.3010605@aribaud.net> Message-ID: <4F141CCE.5010202@aribaud.net> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Prafulla, Le 16/01/2012 09:32, Prafulla Wadaskar a ?crit : > > >> -----Original Message----- >> From: Albert ARIBAUD [mailto:albert.u.boot at aribaud.net] >> Sent: 16 January 2012 14:00 >> To: Prafulla Wadaskar >> Cc: u-boot at lists.denx.de >> Subject: Re: [U-Boot] [PATCH 0/4] Add USB support to orion5x and >> edminiv2 >> >> Hi Prafulla, >> >> Le 16/01/2012 09:20, Prafulla Wadaskar a ?crit : >>> >>> >>>> -----Original Message----- >>>> From: u-boot-bounces at lists.denx.de [mailto:u-boot- >>>> bounces at lists.denx.de] On Behalf Of Albert ARIBAUD >>>> Sent: 16 January 2012 13:39 >>>> To: u-boot at lists.denx.de >>>> Subject: [U-Boot] [PATCH 0/4] Add USB support to orion5x and >> edminiv2 >>>> >>>> This patch set adds USB support to the LaCie ED Mini V2 by renaming >>>> the 'kirkwood' USB driver a 'marvell' USB driver, sharing it >> between >>>> the orion5x SoC family and enabling it for the edminiv2 board. >>>> >>>> (this is similar to what was done with the 'mvgbe' driver in >> commits >>>> 9b6bcdcb to ab9164d0) >>> >>> Hi Albert >>> This is patch series tested on both the platforms- Kirkwood, Orion >> for this change? >>> >>> Otherwise, >>> Acked-by: Prafulla Wadaskar >>> >>> Regards.. >>> Prafulla . .. >> >> For kirkwood the code is just a bunch of renames with no functional >> impact, but I did test the patch set on kirkwood for build-time and >> run-time regressions while developing it. >> >> However, since then I have rebased it a couple of times, and my >> openrd-client is currently not available for testing again. Could you >> possibly test it? > > Okay I will do it in next week is that okay with you? Don't bother: I've been lent another open-rd and I could run the u-boot image through openocd during lunch break. I've just tested usb start, usb tree with a mass storage USB key plugged in, usb info, usb part) and all works fine. > Regards.. > Prafulla . . Amicalement, -- Albert.