From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Mon, 16 Jan 2012 16:05:48 +0100 Subject: [U-Boot] [PATCH 1/3] imximage: Add MX53 to the documentation In-Reply-To: <4F142E92.7050200@de.bosch.com> References: <1326360512-5569-1-git-send-email-dirk.behme@de.bosch.com> <4F142E92.7050200@de.bosch.com> Message-ID: <4F143CCC.5040006@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 16/01/2012 15:05, Dirk Behme wrote: >>> >>> This document describes how to set up a U-Boot image >>> -that can be booted by Freescale MX25, MX35 and MX51 >>> +that can be booted by Freescale MX25, MX35, MX51 and MX53 >>> processors via internal boot mode. >>> >>> These processors can boot directly from NAND, SPI flash and SD card >>> flash >> >> This change is too trivial. I wonder whether it can be squashed with >> pach 2/3? > > Sure, it could. But from logical point of view I've done two patches to > separate > > 1/3: Correct existing stuff > 2/3: Add new stuff (mx6) Well, another way to see (as I can understand Jason's point of view) was to set them as: 1/2 Update documentation 2/2 Add new feature (mx6) By the way, even if I agree that the first patch could be squashed together with the second one, there is no open issues and the substance is not changed at all ;-) I will merge the current three patches into u-boot-imx. Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de =====================================================================