From mboxrd@z Thu Jan 1 00:00:00 1970 From: Heiko Schocher Date: Fri, 20 Jan 2012 08:05:48 +0100 Subject: [U-Boot] [PATCH v2 1/3] ARM: I2C: I2C Multi byte address support In-Reply-To: <1326879310-2403-1-git-send-email-rachna@ti.com> References: <1326879310-2403-1-git-send-email-rachna@ti.com> Message-ID: <4F19124C.5040504@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hello Patil, Patil, Rachna schrieb: > Existing OMAP I2C driver does not support address > length greater than one. Hence this patch is to > add support for 2 byte address read/write. > > Signed-off-by: Philip, Avinash > Signed-off-by: Hebbar, Gururaja > Signed-off-by: Patil, Rachna > --- > Changes for v2: > Fixed review comments from Heiko Schocher > > drivers/i2c/omap24xx_i2c.c | 468 ++++++++++++++++++++++++++++---------------- > drivers/i2c/omap24xx_i2c.h | 2 + > 2 files changed, 298 insertions(+), 172 deletions(-) Sorry, your patch did not apply, nor on "u-boot.git master" nor on "u-boot-ti-git master": [hs at pollux u-boot-i2c]$ git am 20120120/0001.patch Applying: ARM: I2C: I2C Multi byte address support error: patch failed: drivers/i2c/omap24xx_i2c.c:29 error: drivers/i2c/omap24xx_i2c.c: patch does not apply error: patch failed: drivers/i2c/omap24xx_i2c.h:60 error: drivers/i2c/omap24xx_i2c.h: patch does not apply Patch failed at 0001 ARM: I2C: I2C Multi byte address support When you have resolved this problem run "git am --resolved". If you would prefer to skip this patch, instead run "git am --skip". To restore the original branch and stop patching run "git am --abort". [hs at pollux u-boot-i2c]$ [hs at pollux u-boot-ti]$ git am ../u-boot-i2c/20120120/0001.patch Applying: ARM: I2C: I2C Multi byte address support error: patch failed: drivers/i2c/omap24xx_i2c.c:29 error: drivers/i2c/omap24xx_i2c.c: patch does not apply Patch failed at 0001 ARM: I2C: I2C Multi byte address support When you have resolved this problem run "git am --resolved". If you would prefer to skip this patch, instead run "git am --skip". To restore the original branch and stop patching run "git am --abort". [hs at pollux u-boot-ti]$ ... please rebase. @tom: If you want to pick up this patchserie, I can Ack it ... bye, Heiko -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany