From mboxrd@z Thu Jan 1 00:00:00 1970 From: Michal Simek Date: Tue, 31 Jan 2012 10:01:32 +0100 Subject: [U-Boot] [PATCH 6/8] microblaze: Add faked LL_TEMAC driver configuration In-Reply-To: <9de5c65c73e877595e72747427c4a5e57c5a8a57.1327848193.git.linz@li-pro.net> References: <1327852301.3638.177.camel@keto> <9de5c65c73e877595e72747427c4a5e57c5a8a57.1327848193.git.linz@li-pro.net> Message-ID: <4F27ADEC.9090707@monstr.eu> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Stephan Linz wrote: > Expand the specific configuration for the microblaze-generic > board in xparameters.h with a faked setup to enable the > LL_TEMAC driver. > > Note: From now the microblaze-generic board is no longer a > valid board configuration for a real piece of hardware. Rather > than, we use the file config.mk and xparameters.h as a faked > board configuration to force the compilation of all potential > driver code for Microblaze systems. > > Signed-off-by: Stephan Linz > --- > board/xilinx/microblaze-generic/config.mk | 6 ++++-- > board/xilinx/microblaze-generic/xparameters.h | 24 ++++++++++++++++++++++-- > 2 files changed, 26 insertions(+), 4 deletions(-) > > diff --git a/board/xilinx/microblaze-generic/config.mk b/board/xilinx/microblaze-generic/config.mk > index f8d7e26..9fd1015 100644 > --- a/board/xilinx/microblaze-generic/config.mk > +++ b/board/xilinx/microblaze-generic/config.mk > @@ -21,8 +21,10 @@ > # Foundation, Inc., 59 Temple Place, Suite 330, Boston, > # MA 02111-1307 USA > # > -# CAUTION: This file is automatically generated by libgen. > -# Version: Xilinx EDK 6.3 EDK_Gmm.12.3 > +# CAUTION: This file is a faked configuration !!! > +# There is no real target for the microblaze-generic > +# configuration. You have to replace this file with > +# the generated file from your Xilinx design flow. > # > > CONFIG_SYS_TEXT_BASE = 0x29000000 > diff --git a/board/xilinx/microblaze-generic/xparameters.h b/board/xilinx/microblaze-generic/xparameters.h > index fae03bf..69758c3 100644 > --- a/board/xilinx/microblaze-generic/xparameters.h > +++ b/board/xilinx/microblaze-generic/xparameters.h > @@ -21,8 +21,10 @@ > * Foundation, Inc., 59 Temple Place, Suite 330, Boston, > * MA 02111-1307 USA > * > - * CAUTION: This file is automatically generated by libgen. > - * Version: Xilinx EDK 8.2.02 EDK_Im_Sp2.4 > + * CAUTION: This file is a faked configuration !!! > + * There is no real target for the microblaze-generic > + * configuration. You have to replace this file with > + * the generated file from your Xilinx design flow. > */ > > #define XILINX_BOARD_NAME microblaze-generic > @@ -69,3 +71,21 @@ > > /* Ethernet controller is Ethernet_MAC */ > #define XILINX_EMACLITE_BASEADDR 0x40C00000 > + > +/* Ethernet controller is Ethernet_MAC */ > +#define XILINX_LLTEMAC_BASEADDR 0x44000000 > +#define XILINX_LLTEMAC_SDMA_CTRL_BASEADDR 0x42000180 > +#define XILINX_LLTEMAC_BASEADDR1 0x44000040 > +#define XILINX_LLTEMAC_SDMA_CTRL_BASEADDR1 0x42000200 > +#define XILINX_LLTEMAC_BASEADDR2 0x44100000 > +#define XILINX_LLTEMAC_SDMA_CTRL_BASEADDR2 0x42000280 > +#define XILINX_LLTEMAC_BASEADDR3 0x44100040 > +#define XILINX_LLTEMAC_SDMA_CTRL_BASEADDR3 0x42000300 Do these two options test anything? > +#define XILINX_LLTEMAC_BASEADDR4 0x44200000 > +#define XILINX_LLTEMAC_FIFO_BASEADDR4 0x42100000 > +#define XILINX_LLTEMAC_BASEADDR5 0x44200040 > +#define XILINX_LLTEMAC_FIFO_BASEADDR5 0x42110000 > +#define XILINX_LLTEMAC_BASEADDR6 0x44300000 > +#define XILINX_LLTEMAC_FIFO_BASEADDR6 0x42120000 > +#define XILINX_LLTEMAC_BASEADDR7 0x44300040 > +#define XILINX_LLTEMAC_FIFO_BASEADDR7 0x42130000 The same here. Michal -- Michal Simek, Ing. (M.Eng) w: www.monstr.eu p: +42-0-721842854 Maintainer of Linux kernel 2.6 Microblaze Linux - http://www.monstr.eu/fdt/ Microblaze U-BOOT custodian