From mboxrd@z Thu Jan  1 00:00:00 1970
From: Eric Nelson <eric.nelson@boundarydevices.com>
Date: Tue, 31 Jan 2012 12:14:39 -0700
Subject: [U-Boot] [PATCH V6 - Part 3 - 0/2] SPI flash enhancements:
 allow default bus and chip-selects
In-Reply-To: <201201311311.05336.vapier@gentoo.org>
References: <1328032330-20883-1-git-send-email-eric.nelson@boundarydevices.com>
	<1328032330-20883-6-git-send-email-eric.nelson@boundarydevices.com>
	<201201311311.05336.vapier@gentoo.org>
Message-ID: <4F283D9F.2020506@boundarydevices.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On 01/31/2012 11:11 AM, Mike Frysinger wrote:
> On Tuesday 31 January 2012 12:52:06 Eric Nelson wrote:
>> Patch 1 modifies the 'sf' command to allow a default bus and chip-select
>> to be specified by board headers. This allows a bare 'sf' probe command:
>>        U-Boot>  sf probe
>> instead of the more cumbersome usage when a GPIO is tacked onto
>> the chip-select. Otherwise, this command-line would be needed
>> to specify GP3:19 on SabreLite:
>>        U-Boot>  sf probe 0x5300
>>
>> Patch 2 provides a description of usage and configuration of CONFIG_CMD_SF.
>
> you can drop these two SF patches from your mx6q series.  i don't want to keep
> checking to see if you've updated them :p.
> -mike

I figured as much, but I can't really test them without the rest of the
series...