From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Fri, 03 Feb 2012 07:29:34 +0100 Subject: [U-Boot] [PATCH 1/1] MX5:MX53: support for Freescale MX53LOCO In-Reply-To: References: Message-ID: <4F2B7ECE.6050608@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 03/02/2012 06:58, Jason Liu wrote: Hi Bud, >> I have cloned yesterday http://git.denx.de/u-boot.git on to my local >> machine and from there selected the v2011.12-rc3 tag. Then I configured >> the mx53loco board and successfully build u-boot.imx, copied the image >> to a SD card and powered it up. What I then got on the serial port >> terminal was as follows: > I have fixed this issue by a recent commit which is queened in > u-boot-imx and you can refer to > the patch here: http://patchwork.ozlabs.org/patch/138761/ > You can also clone from http://git.denx.de/u-boot-imx.git, Jason's patch was already merged. Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de =====================================================================