[U-Boot] [PATCH v2 6/7] tegra: Select I2C ordering for Seaboard

[Stephen Warren <swarren@nvidia.com>]

On 02/03/2012 04:24 PM, Simon Glass wrote:
> Hi Stephen,
> 
> On Thu, Jan 19, 2012 at 12:56 PM, Stephen Warren <swarren@nvidia.com> wrote:
>> On 01/12/2012 12:00 PM, Simon Glass wrote:
>>> Select the port ordering for I2C on Seaboard.
>>>
>>> Signed-off-by: Simon Glass <sjg@chromium.org>
>>> Acked-by: Stephen Warren <swarren@nvidia.com>
>>
>> This isn't the patch that I ack'd.
> 
> Sorry, I added the disable.
> 
>>
>>> diff --git a/board/nvidia/dts/tegra2-seaboard.dts b/board/nvidia/dts/tegra2-seaboard.dts
>>
>> Unrelated to this patch, but shouldn't that be tegra-seaboard.dts not
>> tegra2-seaboard.dts to match the naming in the kernel?
>>
>>> @@ -44,4 +49,9 @@
>>>       usb at c5004000 {
>>>               status = "disabled";
>>>       };
>>> +
>>> +     i2c at 7000c400 {
>>> +             status = "disabled";
>>> +     };
>>> +
>>>  };
>>
>> That chunk wasn't in the original patch, and doesn't match the kernel's
>> .dts file (and I believe that I2C controller really is in use, so
>> shouldn't be disabled).
> 
> It cannot be used - remember the discussion about pinmux? We elected
> to disable I2C1 at present since you didn't like my nvidia,pinmux
> binding for selecting which value to pass to funcmux. The fix is to
> pass 1 instead of 0 for that port, but we have no clean way to specify
> this.
> 
> Rather disable it than leave it enabled and not working.

Rather than having the .dts file not correctly describe the HW, wouldn't
it be better to limit U-Boot's to only initializing the 1 I2C controller
that it knows the valid pinmux setting for?

-- 
nvpublic