From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Tue, 07 Feb 2012 09:11:11 +0100 Subject: [U-Boot] [PATCH 1/1] MX5:MX53: support for Freescale MX53LOCO In-Reply-To: References: <4F2B7ECE.6050608@denx.de> Message-ID: <4F30DC9F.4070201@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 07/02/2012 02:38, Bud Miljkovic wrote: > Hi Stefano, > > I cloned from http://git.denx.de/u-boot-imx.git into local directory > "/home/budm/Mamaku-Boot/". Then configured for mx53loco_config without a > problem but the make failed. > > I am using the same tools as the previous case when I was successful in > building but could not get it to run, etc. > > The command line I use is: make ARCH=arm CROSS_COMPILE=arm-none-eabi- > u-boot.imx > > I am attaching two log files: > > 1. bould.log - containing all output just before the > error > 2. build_failure.log - containing the error output > Any suggestion is appreciated. commit f31a911fe (arm, post: add missing post_time_ms for arm) enables get_ticks and get_tbclk for all arm based boards, MX5/MX6 have not yet implemented. I have sent a fix, you should apply this patch: http://patchwork.ozlabs.org/patch/139720/ Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de =====================================================================