[U-Boot] [STATUS] [ARM]

[U-Boot] [STATUS] [ARM]

[Albert ARIBAUD]

Hi all,

I just did a ./MAKEALL arm with ELDK42 on the u-boot-arm/master for 
which I just sent a pull request.

The raw result is:

--------------------- SUMMARY ----------------------------
Boards compiled: 283
Boards with warnings or errors: 61 ( actux1_4_16 actux1_4_32 actux1_8_16 
actux1_8_32 actux2 actux3 actux4 ca9x4_ct_vxp cam_enc_4xx colibri_pxa270 
dvlhost efikamx efikasb ethernut5 flea3 harmony hawkboard hawkboard_uart 
highbank imx27lite imx31_litekit imx31_phycore imx31_phycore_eet 
km_kirkwood km_kirkwood_pci m28evk magnesium mcx medcom mgcoge3un 
mt_ventoux mx28evk mx31ads mx31pdk mx35pdk mx51evk mx53ard mx53evk 
mx53loco mx53smd mx6qarm2 mx6qsabrelite nhk8815 nhk8815_onenand 
omap1610h2_cs_autoboot omap1610inn_cs_autoboot paz00 pdnb3 plutux portl2 
qong scpu seaboard tt01 twister ventana vision2 vpac270_nor_128 
vpac270_nor_256 vpac270_ond_256 )
----------------------------------------------------------

Of the 61 boards which partially or totally fail to build, some fail 
because the boards are big endian -- I don't count them in, that's my 
toolchain failing, not them. They are:

actux1_4_16 actux1_4_32 actux1_8_16 actux1_8_32 actux2 actux3 actux4 
dvlhost pdnb3 scpu.

However, 30 remainig boards share the same cause:

ca9x4_ct_vxp colibri_pxa270 efikamx efikasb flea3 imx27lite 
imx31_litekit imx31_phycore_eet imx31_phycore m28evk magnesium mx28evk 
mx31ads mx31pdk mx35pdk mx51evk mx53ard mx53evk mx53loco mx53smd 
mx6qarm2 mx6qsabrelite nhk8815 nhk8815_onenand qong tt01 vision2 
vpac270_nor_128 vpac270_nor_256 vpac270_ond_256

/home/uboot/src/u-boot-arm/common/main.c:717: undefined reference to 
`get_ticks'
/home/uboot/src/u-boot-arm/common/main.c:717: undefined reference to 
`get_tbclk'

(some only have one of the two errors)

Also, 6 boards fail with the same error:

harmony medcom paz00 plutux seaboard ventana (apparently all tegras)

{standard input}: Assembler messages:
{standard input}:568: Error: bad expression -- `ldr sp,=#1073872896'

The rest:

cam_enc_4xx ethernut5 hawkboard hawkboard_uart highbank km_kirkwood 
km_kirkwood_pci mcx mgcoge3un mt_ventoux omap1610h2_cs_autoboot 
omap1610inn_cs_autoboot portl2 twister

Fail with various causes; I'll send out individual status mails (CC: 
interested parties) later today.

Amicalement,
-- 
Albert.

[U-Boot] [STATUS] [ARM]

[Marek Vasut]

> Hi all,
> 
> I just did a ./MAKEALL arm with ELDK42 on the u-boot-arm/master for
> which I just sent a pull request.
> 
> The raw result is:
> 
> --------------------- SUMMARY ----------------------------
> Boards compiled: 283
> Boards with warnings or errors: 61 ( actux1_4_16 actux1_4_32 actux1_8_16
> actux1_8_32 actux2 actux3 actux4 ca9x4_ct_vxp cam_enc_4xx colibri_pxa270
> dvlhost efikamx efikasb ethernut5 flea3 harmony hawkboard hawkboard_uart
> highbank imx27lite imx31_litekit imx31_phycore imx31_phycore_eet
> km_kirkwood km_kirkwood_pci m28evk magnesium mcx medcom mgcoge3un
> mt_ventoux mx28evk mx31ads mx31pdk mx35pdk mx51evk mx53ard mx53evk
> mx53loco mx53smd mx6qarm2 mx6qsabrelite nhk8815 nhk8815_onenand
> omap1610h2_cs_autoboot omap1610inn_cs_autoboot paz00 pdnb3 plutux portl2
> qong scpu seaboard tt01 twister ventana vision2 vpac270_nor_128
> vpac270_nor_256 vpac270_ond_256 )
> ----------------------------------------------------------
> 
> Of the 61 boards which partially or totally fail to build, some fail
> because the boards are big endian -- I don't count them in, that's my
> toolchain failing, not them. They are:
> 
> actux1_4_16 actux1_4_32 actux1_8_16 actux1_8_32 actux2 actux3 actux4
> dvlhost pdnb3 scpu.

Yea ... I wonder if anyone actually tested those recently (in last 2-3 years).
> 
> However, 30 remainig boards share the same cause:
> 
> ca9x4_ct_vxp colibri_pxa270 efikamx efikasb flea3 imx27lite
> imx31_litekit imx31_phycore_eet imx31_phycore m28evk magnesium mx28evk
> mx31ads mx31pdk mx35pdk mx51evk mx53ard mx53evk mx53loco mx53smd
> mx6qarm2 mx6qsabrelite nhk8815 nhk8815_onenand qong tt01 vision2
> vpac270_nor_128 vpac270_nor_256 vpac270_ond_256
> 
> /home/uboot/src/u-boot-arm/common/main.c:717: undefined reference to
> `get_ticks'
> /home/uboot/src/u-boot-arm/common/main.c:717: undefined reference to
> `get_tbclk'
> 
> (some only have one of the two errors)

PXA timer is broken. MX5 (efika) should be fixed by Stefano's patch.

> 
> Also, 6 boards fail with the same error:
> 
> harmony medcom paz00 plutux seaboard ventana (apparently all tegras)
> 
> {standard input}: Assembler messages:
> {standard input}:568: Error: bad expression -- `ldr sp,=#1073872896'
> 
> The rest:
> 
> cam_enc_4xx ethernut5 hawkboard hawkboard_uart highbank km_kirkwood
> km_kirkwood_pci mcx mgcoge3un mt_ventoux omap1610h2_cs_autoboot
> omap1610inn_cs_autoboot portl2 twister
> 
> Fail with various causes; I'll send out individual status mails (CC:
> interested parties) later today.
> 
> Amicalement,

Need sleep ...

M

[U-Boot] [STATUS] [ARM]

[Dirk Behme]

On 12.02.2012 12:13, Marek Vasut wrote:
>> Hi all,
>>
>> I just did a ./MAKEALL arm with ELDK42 on the u-boot-arm/master for
>> which I just sent a pull request.
>>
>> The raw result is:
>>
>> --------------------- SUMMARY ----------------------------
>> Boards compiled: 283
>> Boards with warnings or errors: 61 ( actux1_4_16 actux1_4_32 actux1_8_16
>> actux1_8_32 actux2 actux3 actux4 ca9x4_ct_vxp cam_enc_4xx colibri_pxa270
>> dvlhost efikamx efikasb ethernut5 flea3 harmony hawkboard hawkboard_uart
>> highbank imx27lite imx31_litekit imx31_phycore imx31_phycore_eet
>> km_kirkwood km_kirkwood_pci m28evk magnesium mcx medcom mgcoge3un
>> mt_ventoux mx28evk mx31ads mx31pdk mx35pdk mx51evk mx53ard mx53evk
>> mx53loco mx53smd mx6qarm2 mx6qsabrelite nhk8815 nhk8815_onenand
>> omap1610h2_cs_autoboot omap1610inn_cs_autoboot paz00 pdnb3 plutux portl2
>> qong scpu seaboard tt01 twister ventana vision2 vpac270_nor_128
>> vpac270_nor_256 vpac270_ond_256 )
>> ----------------------------------------------------------
>>
>> Of the 61 boards which partially or totally fail to build, some fail
>> because the boards are big endian -- I don't count them in, that's my
>> toolchain failing, not them. They are:
>>
>> actux1_4_16 actux1_4_32 actux1_8_16 actux1_8_32 actux2 actux3 actux4
>> dvlhost pdnb3 scpu.
>
> Yea ... I wonder if anyone actually tested those recently (in last 2-3 years).
>>
>> However, 30 remainig boards share the same cause:
>>
>> ca9x4_ct_vxp colibri_pxa270 efikamx efikasb flea3 imx27lite
>> imx31_litekit imx31_phycore_eet imx31_phycore m28evk magnesium mx28evk
>> mx31ads mx31pdk mx35pdk mx51evk mx53ard mx53evk mx53loco mx53smd
>> mx6qarm2 mx6qsabrelite nhk8815 nhk8815_onenand qong tt01 vision2
>> vpac270_nor_128 vpac270_nor_256 vpac270_ond_256
>>
>> /home/uboot/src/u-boot-arm/common/main.c:717: undefined reference to
>> `get_ticks'
>> /home/uboot/src/u-boot-arm/common/main.c:717: undefined reference to
>> `get_tbclk'
>>
>> (some only have one of the two errors)
>
> PXA timer is broken. MX5 (efika) should be fixed by Stefano's patch.

Yes. The MX27, MX28, MX31, MX35 and MX5/MX6 fixes for this:

http://lists.denx.de/pipermail/u-boot/2012-February/117605.html

http://lists.denx.de/pipermail/u-boot/2012-February/117528.html

http://lists.denx.de/pipermail/u-boot/2012-February/117381.html

http://lists.denx.de/pipermail/u-boot/2012-February/117380.html

http://lists.denx.de/pipermail/u-boot/2012-February/117382.html

Best regards

Dirk

[U-Boot] [STATUS] [ARM]

[Albert ARIBAUD]

Hi Dirk, Marek, Stefano,

Le 12/02/2012 12:25, Dirk Behme a ?crit :
> On 12.02.2012 12:13, Marek Vasut wrote:
>>> Hi all,
>>>
>>> I just did a ./MAKEALL arm with ELDK42 on the u-boot-arm/master for
>>> which I just sent a pull request.
>>>
>>> The raw result is:
>>>
>>> --------------------- SUMMARY ----------------------------
>>> Boards compiled: 283
>>> Boards with warnings or errors: 61 ( actux1_4_16 actux1_4_32 actux1_8_16
>>> actux1_8_32 actux2 actux3 actux4 ca9x4_ct_vxp cam_enc_4xx colibri_pxa270
>>> dvlhost efikamx efikasb ethernut5 flea3 harmony hawkboard hawkboard_uart
>>> highbank imx27lite imx31_litekit imx31_phycore imx31_phycore_eet
>>> km_kirkwood km_kirkwood_pci m28evk magnesium mcx medcom mgcoge3un
>>> mt_ventoux mx28evk mx31ads mx31pdk mx35pdk mx51evk mx53ard mx53evk
>>> mx53loco mx53smd mx6qarm2 mx6qsabrelite nhk8815 nhk8815_onenand
>>> omap1610h2_cs_autoboot omap1610inn_cs_autoboot paz00 pdnb3 plutux portl2
>>> qong scpu seaboard tt01 twister ventana vision2 vpac270_nor_128
>>> vpac270_nor_256 vpac270_ond_256 )
>>> ----------------------------------------------------------
>>>
>>> Of the 61 boards which partially or totally fail to build, some fail
>>> because the boards are big endian -- I don't count them in, that's my
>>> toolchain failing, not them. They are:
>>>
>>> actux1_4_16 actux1_4_32 actux1_8_16 actux1_8_32 actux2 actux3 actux4
>>> dvlhost pdnb3 scpu.
>>
>> Yea ... I wonder if anyone actually tested those recently (in last 2-3
>> years).
>>>
>>> However, 30 remainig boards share the same cause:
>>>
>>> ca9x4_ct_vxp colibri_pxa270 efikamx efikasb flea3 imx27lite
>>> imx31_litekit imx31_phycore_eet imx31_phycore m28evk magnesium mx28evk
>>> mx31ads mx31pdk mx35pdk mx51evk mx53ard mx53evk mx53loco mx53smd
>>> mx6qarm2 mx6qsabrelite nhk8815 nhk8815_onenand qong tt01 vision2
>>> vpac270_nor_128 vpac270_nor_256 vpac270_ond_256
>>>
>>> /home/uboot/src/u-boot-arm/common/main.c:717: undefined reference to
>>> `get_ticks'
>>> /home/uboot/src/u-boot-arm/common/main.c:717: undefined reference to
>>> `get_tbclk'
>>>
>>> (some only have one of the two errors)
>>
>> PXA timer is broken. MX5 (efika) should be fixed by Stefano's patch.
>
> Yes. The MX27, MX28, MX31, MX35 and MX5/MX6 fixes for this:
>
> http://lists.denx.de/pipermail/u-boot/2012-February/117605.html
>
> http://lists.denx.de/pipermail/u-boot/2012-February/117528.html
>
> http://lists.denx.de/pipermail/u-boot/2012-February/117381.html
>
> http://lists.denx.de/pipermail/u-boot/2012-February/117380.html
>
> http://lists.denx.de/pipermail/u-boot/2012-February/117382.html
>
> Best regards

Ok, so should I expect a new imx pull request?

> Dirk

Amicalement,
-- 
Albert.

[U-Boot] [STATUS] [ARM]

[Sughosh Ganu]

hi Albert,

On Sun, Feb 12, 2012 at 3:48 PM, Albert ARIBAUD
<albert.u.boot@aribaud.net>wrote:

> Hi all,
>
> I just did a ./MAKEALL arm with ELDK42 on the u-boot-arm/master for which
> I just sent a pull request.
>
> The raw result is:
>
> --------------------- SUMMARY ----------------------------
> Boards compiled: 283
> Boards with warnings or errors: 61 ( actux1_4_16 actux1_4_32 actux1_8_16
> actux1_8_32 actux2 actux3 actux4 ca9x4_ct_vxp cam_enc_4xx colibri_pxa270
> dvlhost efikamx efikasb ethernut5 flea3 harmony hawkboard hawkboard_uart
> highbank imx27lite imx31_litekit imx31_phycore imx31_phycore_eet
> km_kirkwood km_kirkwood_pci m28evk magnesium mcx medcom mgcoge3un
> mt_ventoux mx28evk mx31ads mx31pdk mx35pdk mx51evk mx53ard mx53evk mx53loco
> mx53smd mx6qarm2 mx6qsabrelite nhk8815 nhk8815_onenand
> omap1610h2_cs_autoboot omap1610inn_cs_autoboot paz00 pdnb3 plutux portl2
> qong scpu seaboard tt01 twister ventana vision2 vpac270_nor_128
> vpac270_nor_256 vpac270_ond_256 )
> ------------------------------**----------------------------
>
>
<snip>


> The rest:
>
> cam_enc_4xx ethernut5 hawkboard hawkboard_uart highbank km_kirkwood
> km_kirkwood_pci mcx mgcoge3un mt_ventoux omap1610h2_cs_autoboot
> omap1610inn_cs_autoboot portl2 twister
>
> Fail with various causes; I'll send out individual status mails (CC:
> interested parties) later today.
>
>
I pulled in a new u-boot-arm tree, and am able to compile both hawkboard
and hawkboard_uart fine. I use a 4.6.2 based gcc(arm-none-eabi) and a 2.21
binutils. Can you please send me a log of the errors you get for the
hawkboard. Thanks.

-sughosh

[U-Boot] [STATUS] [ARM]

[Marek Vasut]

> hi Albert,
> 
> On Sun, Feb 12, 2012 at 3:48 PM, Albert ARIBAUD
> 
> <albert.u.boot@aribaud.net>wrote:
> > Hi all,
> > 
> > I just did a ./MAKEALL arm with ELDK42 on the u-boot-arm/master for which
> > I just sent a pull request.
> > 
> > The raw result is:
> > 
> > --------------------- SUMMARY ----------------------------
> > Boards compiled: 283
> > Boards with warnings or errors: 61 ( actux1_4_16 actux1_4_32 actux1_8_16
> > actux1_8_32 actux2 actux3 actux4 ca9x4_ct_vxp cam_enc_4xx colibri_pxa270
> > dvlhost efikamx efikasb ethernut5 flea3 harmony hawkboard hawkboard_uart
> > highbank imx27lite imx31_litekit imx31_phycore imx31_phycore_eet
> > km_kirkwood km_kirkwood_pci m28evk magnesium mcx medcom mgcoge3un
> > mt_ventoux mx28evk mx31ads mx31pdk mx35pdk mx51evk mx53ard mx53evk
> > mx53loco mx53smd mx6qarm2 mx6qsabrelite nhk8815 nhk8815_onenand
> > omap1610h2_cs_autoboot omap1610inn_cs_autoboot paz00 pdnb3 plutux portl2
> > qong scpu seaboard tt01 twister ventana vision2 vpac270_nor_128
> > vpac270_nor_256 vpac270_ond_256 )
> > ------------------------------**----------------------------
> 
> <snip>
> 
> > The rest:
> > 
> > cam_enc_4xx ethernut5 hawkboard hawkboard_uart highbank km_kirkwood
> > km_kirkwood_pci mcx mgcoge3un mt_ventoux omap1610h2_cs_autoboot
> > omap1610inn_cs_autoboot portl2 twister
> > 
> > Fail with various causes; I'll send out individual status mails (CC:
> > interested parties) later today.
> 
> I pulled in a new u-boot-arm tree, and am able to compile both hawkboard
> and hawkboard_uart fine. I use a 4.6.2 based gcc(arm-none-eabi) and a 2.21
> binutils. Can you please send me a log of the errors you get for the
> hawkboard. Thanks.

Can you please try with ELDK 5.1 and ELDK 4.2 ? These are toolchains that the u-
boot has to be compilable with without errors. If it isn't, there's a problem in 
the code.

M
> 
> -sughosh

[U-Boot] [STATUS] [ARM]

[Tom Rini]

On Sun, Feb 12, 2012 at 7:15 AM, Marek Vasut <marek.vasut@gmail.com> wrote:
>> hi Albert,
>>
>> On Sun, Feb 12, 2012 at 3:48 PM, Albert ARIBAUD
>>
>> <albert.u.boot@aribaud.net>wrote:
>> > Hi all,
>> >
>> > I just did a ./MAKEALL arm with ELDK42 on the u-boot-arm/master for which
>> > I just sent a pull request.
>> >
>> > The raw result is:
>> >
>> > --------------------- SUMMARY ----------------------------
>> > Boards compiled: 283
>> > Boards with warnings or errors: 61 ( actux1_4_16 actux1_4_32 actux1_8_16
>> > actux1_8_32 actux2 actux3 actux4 ca9x4_ct_vxp cam_enc_4xx colibri_pxa270
>> > dvlhost efikamx efikasb ethernut5 flea3 harmony hawkboard hawkboard_uart
>> > highbank imx27lite imx31_litekit imx31_phycore imx31_phycore_eet
>> > km_kirkwood km_kirkwood_pci m28evk magnesium mcx medcom mgcoge3un
>> > mt_ventoux mx28evk mx31ads mx31pdk mx35pdk mx51evk mx53ard mx53evk
>> > mx53loco mx53smd mx6qarm2 mx6qsabrelite nhk8815 nhk8815_onenand
>> > omap1610h2_cs_autoboot omap1610inn_cs_autoboot paz00 pdnb3 plutux portl2
>> > qong scpu seaboard tt01 twister ventana vision2 vpac270_nor_128
>> > vpac270_nor_256 vpac270_ond_256 )
>> > ------------------------------**----------------------------
>>
>> <snip>
>>
>> > The rest:
>> >
>> > cam_enc_4xx ethernut5 hawkboard hawkboard_uart highbank km_kirkwood
>> > km_kirkwood_pci mcx mgcoge3un mt_ventoux omap1610h2_cs_autoboot
>> > omap1610inn_cs_autoboot portl2 twister
>> >
>> > Fail with various causes; I'll send out individual status mails (CC:
>> > interested parties) later today.
>>
>> I pulled in a new u-boot-arm tree, and am able to compile both hawkboard
>> and hawkboard_uart fine. I use a 4.6.2 based gcc(arm-none-eabi) and a 2.21
>> binutils. Can you please send me a log of the errors you get for the
>> hawkboard. Thanks.
>
> Can you please try with ELDK 5.1 and ELDK 4.2 ? These are toolchains that the u-
> boot has to be compilable with without errors. If it isn't, there's a problem in
> the code.

I'll grab those as well but we'll have different warnings with
toolchains due to the rel.dyn/bss overlap issue that was eventually
(apparently) fixed.  I don't think any of these (of
davinci/omap*/am33xx) are fatal, just warnings.

-- 
Tom

[U-Boot] [STATUS] [ARM]

[Albert ARIBAUD]

Hi, Sughosh,

Le 12/02/2012 15:03, Sughosh Ganu a ?crit :
> hi Albert,
>
> On Sun, Feb 12, 2012 at 3:48 PM, Albert ARIBAUD
> <albert.u.boot@aribaud.net>wrote:
>
>> Hi all,
>>
>> I just did a ./MAKEALL arm with ELDK42 on the u-boot-arm/master for which
>> I just sent a pull request.
>>
>> The raw result is:
>>
>> --------------------- SUMMARY ----------------------------
>> Boards compiled: 283
>> Boards with warnings or errors: 61 ( actux1_4_16 actux1_4_32 actux1_8_16
>> actux1_8_32 actux2 actux3 actux4 ca9x4_ct_vxp cam_enc_4xx colibri_pxa270
>> dvlhost efikamx efikasb ethernut5 flea3 harmony hawkboard hawkboard_uart
>> highbank imx27lite imx31_litekit imx31_phycore imx31_phycore_eet
>> km_kirkwood km_kirkwood_pci m28evk magnesium mcx medcom mgcoge3un
>> mt_ventoux mx28evk mx31ads mx31pdk mx35pdk mx51evk mx53ard mx53evk mx53loco
>> mx53smd mx6qarm2 mx6qsabrelite nhk8815 nhk8815_onenand
>> omap1610h2_cs_autoboot omap1610inn_cs_autoboot paz00 pdnb3 plutux portl2
>> qong scpu seaboard tt01 twister ventana vision2 vpac270_nor_128
>> vpac270_nor_256 vpac270_ond_256 )
>> ------------------------------**----------------------------
>>
>>
> <snip>
>
>
>> The rest:
>>
>> cam_enc_4xx ethernut5 hawkboard hawkboard_uart highbank km_kirkwood
>> km_kirkwood_pci mcx mgcoge3un mt_ventoux omap1610h2_cs_autoboot
>> omap1610inn_cs_autoboot portl2 twister
>>
>> Fail with various causes; I'll send out individual status mails (CC:
>> interested parties) later today.
>>
>>
> I pulled in a new u-boot-arm tree, and am able to compile both hawkboard
> and hawkboard_uart fine. I use a 4.6.2 based gcc(arm-none-eabi) and a 2.21
> binutils. Can you please send me a log of the errors you get for the
> hawkboard. Thanks.

Sure, here is what I get with ELDK4.2:

uboot at lilith:~/src/u-boot-arm$ ./MAKEALL hawkboard
Configuring for hawkboard board...
arch/arm/cpu/arm926ejs/davinci/libdavinci.o: In function `lldiv':
/home/uboot/src/u-boot-arm/include/div64.h:45: undefined reference to 
`__div64_32'
drivers/mtd/nand/libnand.o: In function `nand_command':
/home/uboot/src/u-boot-arm/drivers/mtd/nand/nand_base.c:586: undefined 
reference to `udelay'
/home/uboot/src/u-boot-arm/drivers/mtd/nand/nand_base.c:602: undefined 
reference to `udelay'
/home/uboot/src/u-boot-arm/drivers/mtd/nand/nand_base.c:608: undefined 
reference to `udelay'
make[1]: *** [/home/uboot/src/u-boot-arm/spl/u-boot-spl] Erreur 1
make: *** [spl/u-boot-spl.bin] Erreur 2
    text	   data	    bss	    dec	    hex	filename
  191224	   6388	  54664	 252276	  3d974	./u-boot

--------------------- SUMMARY ----------------------------
Boards compiled: 1
Boards with warnings or errors: 1 ( hawkboard )
----------------------------------------------------------

> -sughosh

Amicalement,
-- 
Albert.

[U-Boot] [STATUS] [ARM]

[Tom Rini]

On Sun, Feb 12, 2012 at 7:35 AM, Albert ARIBAUD
<albert.u.boot@aribaud.net> wrote:
> Hi, Sughosh,
>
> Le 12/02/2012 15:03, Sughosh Ganu a ?crit :
>
>> hi Albert,
>>
>> On Sun, Feb 12, 2012 at 3:48 PM, Albert ARIBAUD
>> <albert.u.boot@aribaud.net>wrote:
>>
>>> Hi all,
>>>
>>> I just did a ./MAKEALL arm with ELDK42 on the u-boot-arm/master for which
>>> I just sent a pull request.
>>>
>>> The raw result is:
>>>
>>> --------------------- SUMMARY ----------------------------
>>> Boards compiled: 283
>>> Boards with warnings or errors: 61 ( actux1_4_16 actux1_4_32 actux1_8_16
>>> actux1_8_32 actux2 actux3 actux4 ca9x4_ct_vxp cam_enc_4xx colibri_pxa270
>>> dvlhost efikamx efikasb ethernut5 flea3 harmony hawkboard hawkboard_uart
>>> highbank imx27lite imx31_litekit imx31_phycore imx31_phycore_eet
>>> km_kirkwood km_kirkwood_pci m28evk magnesium mcx medcom mgcoge3un
>>> mt_ventoux mx28evk mx31ads mx31pdk mx35pdk mx51evk mx53ard mx53evk
>>> mx53loco
>>> mx53smd mx6qarm2 mx6qsabrelite nhk8815 nhk8815_onenand
>>> omap1610h2_cs_autoboot omap1610inn_cs_autoboot paz00 pdnb3 plutux portl2
>>> qong scpu seaboard tt01 twister ventana vision2 vpac270_nor_128
>>> vpac270_nor_256 vpac270_ond_256 )
>>> ------------------------------**----------------------------
>>>
>>>
>> <snip>
>>
>>
>>> The rest:
>>>
>>> cam_enc_4xx ethernut5 hawkboard hawkboard_uart highbank km_kirkwood
>>> km_kirkwood_pci mcx mgcoge3un mt_ventoux omap1610h2_cs_autoboot
>>> omap1610inn_cs_autoboot portl2 twister
>>>
>>> Fail with various causes; I'll send out individual status mails (CC:
>>> interested parties) later today.
>>>
>>>
>> I pulled in a new u-boot-arm tree, and am able to compile both hawkboard
>> and hawkboard_uart fine. I use a 4.6.2 based gcc(arm-none-eabi) and a 2.21
>> binutils. Can you please send me a log of the errors you get for the
>> hawkboard. Thanks.
>
>
> Sure, here is what I get with ELDK4.2:
>
> uboot at lilith:~/src/u-boot-arm$ ./MAKEALL hawkboard
> Configuring for hawkboard board...
> arch/arm/cpu/arm926ejs/davinci/libdavinci.o: In function `lldiv':
> /home/uboot/src/u-boot-arm/include/div64.h:45: undefined reference to
> `__div64_32'
> drivers/mtd/nand/libnand.o: In function `nand_command':
> /home/uboot/src/u-boot-arm/drivers/mtd/nand/nand_base.c:586: undefined
> reference to `udelay'
> /home/uboot/src/u-boot-arm/drivers/mtd/nand/nand_base.c:602: undefined
> reference to `udelay'
> /home/uboot/src/u-boot-arm/drivers/mtd/nand/nand_base.c:608: undefined
> reference to `udelay'
> make[1]: *** [/home/uboot/src/u-boot-arm/spl/u-boot-spl] Erreur 1
> make: *** [spl/u-boot-spl.bin] Erreur 2
> ? text ? ?data ? ? bss ? ? dec ? ? hex filename
> ?191224 ? ?6388 ? 54664 ?252276 ? 3d974 ./u-boot
>
> --------------------- SUMMARY ----------------------------
> Boards compiled: 1
> Boards with warnings or errors: 1 ( hawkboard )
> ----------------------------------------------------------

Hmm, built-in udelay w/ newer toolchains, not in older ones?

-- 
Tom

[U-Boot] [STATUS] [ARM]

[Stefano Babic]

On 12/02/2012 14:37, Albert ARIBAUD wrote:
> Hi Dirk, Marek, Stefano,
> 

Hi Albert,

>> Yes. The MX27, MX28, MX31, MX35 and MX5/MX6 fixes for this:
>>
>> http://lists.denx.de/pipermail/u-boot/2012-February/117605.html
>>
>> http://lists.denx.de/pipermail/u-boot/2012-February/117528.html
>>
>> http://lists.denx.de/pipermail/u-boot/2012-February/117381.html
>>
>> http://lists.denx.de/pipermail/u-boot/2012-February/117380.html
>>
>> http://lists.denx.de/pipermail/u-boot/2012-February/117382.html
>>
>> Best regards
> 
> Ok, so should I expect a new imx pull request?

Yes - I would also push a couple of patches for i.MX6, this is the
reason I defer my pull request. Then I will send to you my pull request.

Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================

[U-Boot] [STATUS] [ARM]

[Sughosh Ganu]

On Sun, Feb 12, 2012 at 8:09 PM, Tom Rini <tom.rini@gmail.com> wrote:

> On Sun, Feb 12, 2012 at 7:35 AM, Albert ARIBAUD
> <albert.u.boot@aribaud.net> wrote:
>

<snip>


> >>> Fail with various causes; I'll send out individual status mails (CC:
> >>> interested parties) later today.
> >>>
> >>>
> >> I pulled in a new u-boot-arm tree, and am able to compile both hawkboard
> >> and hawkboard_uart fine. I use a 4.6.2 based gcc(arm-none-eabi) and a
> 2.21
> >> binutils. Can you please send me a log of the errors you get for the
> >> hawkboard. Thanks.
> >
> >
> > Sure, here is what I get with ELDK4.2:
> >
> > uboot at lilith:~/src/u-boot-arm$ ./MAKEALL hawkboard
> > Configuring for hawkboard board...
> > arch/arm/cpu/arm926ejs/davinci/libdavinci.o: In function `lldiv':
> > /home/uboot/src/u-boot-arm/include/div64.h:45: undefined reference to
> > `__div64_32'
> > drivers/mtd/nand/libnand.o: In function `nand_command':
> > /home/uboot/src/u-boot-arm/drivers/mtd/nand/nand_base.c:586: undefined
> > reference to `udelay'
> > /home/uboot/src/u-boot-arm/drivers/mtd/nand/nand_base.c:602: undefined
> > reference to `udelay'
> > /home/uboot/src/u-boot-arm/drivers/mtd/nand/nand_base.c:608: undefined
> > reference to `udelay'
> > make[1]: *** [/home/uboot/src/u-boot-arm/spl/u-boot-spl] Erreur 1
> > make: *** [spl/u-boot-spl.bin] Erreur 2
> >   text    data     bss     dec     hex filename
> >  191224    6388   54664  252276   3d974 ./u-boot
> >
> > --------------------- SUMMARY ----------------------------
> > Boards compiled: 1
> > Boards with warnings or errors: 1 ( hawkboard )
> > ----------------------------------------------------------
>
> Hmm, built-in udelay w/ newer toolchains, not in older ones?
>
>
Or is it that function-sections is not working as expected with the older
toolchains? The above error is with the nand_command function in the
nand_base.c which should not be getting linked at all -- the nand_command
function in the nand_spl_simple.c gets used for the spl build. The
functions in nand_base.c should get discarded, which should take care of
the undefined udelay. I disassembled the u-boot-spl file with my toolchain,
and don't see a udelay getting included at all -- as is expected with the
spl build. Btw, the nand_command function in nand_spl_simple.c is getting
name mangled by the compiler.

-sughosh

[U-Boot] [STATUS] [ARM]

[Rob Herring]

Albert,

On 02/12/2012 04:18 AM, Albert ARIBAUD wrote:
> Hi all,
> 
> I just did a ./MAKEALL arm with ELDK42 on the u-boot-arm/master for
> which I just sent a pull request.
> 
> The raw result is:
> 
> --------------------- SUMMARY ----------------------------
> Boards compiled: 283
> Boards with warnings or errors: 61 ( actux1_4_16 actux1_4_32 actux1_8_16
> actux1_8_32 actux2 actux3 actux4 ca9x4_ct_vxp cam_enc_4xx colibri_pxa270
> dvlhost efikamx efikasb ethernut5 flea3 harmony hawkboard hawkboard_uart
> highbank imx27lite imx31_litekit imx31_phycore imx31_phycore_eet
> km_kirkwood km_kirkwood_pci m28evk magnesium mcx medcom mgcoge3un
> mt_ventoux mx28evk mx31ads mx31pdk mx35pdk mx51evk mx53ard mx53evk
> mx53loco mx53smd mx6qarm2 mx6qsabrelite nhk8815 nhk8815_onenand
> omap1610h2_cs_autoboot omap1610inn_cs_autoboot paz00 pdnb3 plutux portl2
> qong scpu seaboard tt01 twister ventana vision2 vpac270_nor_128
> vpac270_nor_256 vpac270_ond_256 )
> ----------------------------------------------------------
> 
> Of the 61 boards which partially or totally fail to build, some fail
> because the boards are big endian -- I don't count them in, that's my
> toolchain failing, not them. They are:
> 
> actux1_4_16 actux1_4_32 actux1_8_16 actux1_8_32 actux2 actux3 actux4
> dvlhost pdnb3 scpu.
> 
> However, 30 remainig boards share the same cause:
> 
> ca9x4_ct_vxp colibri_pxa270 efikamx efikasb flea3 imx27lite
> imx31_litekit imx31_phycore_eet imx31_phycore m28evk magnesium mx28evk
> mx31ads mx31pdk mx35pdk mx51evk mx53ard mx53evk mx53loco mx53smd
> mx6qarm2 mx6qsabrelite nhk8815 nhk8815_onenand qong tt01 vision2
> vpac270_nor_128 vpac270_nor_256 vpac270_ond_256
> 
> /home/uboot/src/u-boot-arm/common/main.c:717: undefined reference to
> `get_ticks'
> /home/uboot/src/u-boot-arm/common/main.c:717: undefined reference to
> `get_tbclk'
> 
> (some only have one of the two errors)
> 
> Also, 6 boards fail with the same error:
> 
> harmony medcom paz00 plutux seaboard ventana (apparently all tegras)
> 
> {standard input}: Assembler messages:
> {standard input}:568: Error: bad expression -- `ldr sp,=#1073872896'
> 
> The rest:
> 
> cam_enc_4xx ethernut5 hawkboard hawkboard_uart highbank km_kirkwood
> km_kirkwood_pci mcx mgcoge3un mt_ventoux omap1610h2_cs_autoboot
> omap1610inn_cs_autoboot portl2 twister
> 

I've posted a fix for highbank already:

http://patchwork.ozlabs.org/patch/139020/

There's also several other fixes and features:

http://patchwork.ozlabs.org/patch/139066/

Regards,
Rob

[U-Boot] [STATUS] [ARM]

[Albert ARIBAUD]

Le 14/02/2012 17:45, Rob Herring a ?crit :
> Albert,
>
> On 02/12/2012 04:18 AM, Albert ARIBAUD wrote:
>> Hi all,
>>
>> I just did a ./MAKEALL arm with ELDK42 on the u-boot-arm/master for
>> which I just sent a pull request.
>>
>> The raw result is:
>>
>> --------------------- SUMMARY ----------------------------
>> Boards compiled: 283
>> Boards with warnings or errors: 61 ( actux1_4_16 actux1_4_32 actux1_8_16
>> actux1_8_32 actux2 actux3 actux4 ca9x4_ct_vxp cam_enc_4xx colibri_pxa270
>> dvlhost efikamx efikasb ethernut5 flea3 harmony hawkboard hawkboard_uart
>> highbank imx27lite imx31_litekit imx31_phycore imx31_phycore_eet
>> km_kirkwood km_kirkwood_pci m28evk magnesium mcx medcom mgcoge3un
>> mt_ventoux mx28evk mx31ads mx31pdk mx35pdk mx51evk mx53ard mx53evk
>> mx53loco mx53smd mx6qarm2 mx6qsabrelite nhk8815 nhk8815_onenand
>> omap1610h2_cs_autoboot omap1610inn_cs_autoboot paz00 pdnb3 plutux portl2
>> qong scpu seaboard tt01 twister ventana vision2 vpac270_nor_128
>> vpac270_nor_256 vpac270_ond_256 )
>> ----------------------------------------------------------
>>
>> Of the 61 boards which partially or totally fail to build, some fail
>> because the boards are big endian -- I don't count them in, that's my
>> toolchain failing, not them. They are:
>>
>> actux1_4_16 actux1_4_32 actux1_8_16 actux1_8_32 actux2 actux3 actux4
>> dvlhost pdnb3 scpu.
>>
>> However, 30 remainig boards share the same cause:
>>
>> ca9x4_ct_vxp colibri_pxa270 efikamx efikasb flea3 imx27lite
>> imx31_litekit imx31_phycore_eet imx31_phycore m28evk magnesium mx28evk
>> mx31ads mx31pdk mx35pdk mx51evk mx53ard mx53evk mx53loco mx53smd
>> mx6qarm2 mx6qsabrelite nhk8815 nhk8815_onenand qong tt01 vision2
>> vpac270_nor_128 vpac270_nor_256 vpac270_ond_256
>>
>> /home/uboot/src/u-boot-arm/common/main.c:717: undefined reference to
>> `get_ticks'
>> /home/uboot/src/u-boot-arm/common/main.c:717: undefined reference to
>> `get_tbclk'
>>
>> (some only have one of the two errors)
>>
>> Also, 6 boards fail with the same error:
>>
>> harmony medcom paz00 plutux seaboard ventana (apparently all tegras)
>>
>> {standard input}: Assembler messages:
>> {standard input}:568: Error: bad expression -- `ldr sp,=#1073872896'
>>
>> The rest:
>>
>> cam_enc_4xx ethernut5 hawkboard hawkboard_uart highbank km_kirkwood
>> km_kirkwood_pci mcx mgcoge3un mt_ventoux omap1610h2_cs_autoboot
>> omap1610inn_cs_autoboot portl2 twister
>>
>
> I've posted a fix for highbank already:
>
> http://patchwork.ozlabs.org/patch/139020/

Now builds but still has warnings:

Configuring for highbank board...
calxedaxgmac.c: In function 'xgmac_tx':
calxedaxgmac.c:445: warning: passing argument 2 of 
'desc_set_buf_addr_and_size' discards qualifiers from pointer target type
cmd_pxe.c: In function 'do_pxe_get':
cmd_pxe.c:334: warning: dereferencing type-punned pointer will break 
strict-aliasing rules
cmd_pxe.c: In function 'get_relfile_envaddr':
cmd_pxe.c:374: warning: dereferencing type-punned pointer will break 
strict-aliasing rules
highbank.c: In function 'board_eth_init':
highbank.c:42: warning: implicit declaration of function 
'calxedaxgmac_initialize'
common/libcommon.o: In function `cread_line':
/home/uboot/src/u-boot-arm/common/main.c:717: undefined reference to 
`get_tbclk'

> There's also several other fixes and features:
>
> http://patchwork.ozlabs.org/patch/139066/
>
> Regards,
> Rob

Amicalement,
-- 
Albert.

[U-Boot] [STATUS] [ARM]

[Rob Herring]

On 02/17/2012 02:45 AM, Albert ARIBAUD wrote:
> Le 14/02/2012 17:45, Rob Herring a ?crit :
>> Albert,
>>
>> On 02/12/2012 04:18 AM, Albert ARIBAUD wrote:
>>> Hi all,
>>>
>>> I just did a ./MAKEALL arm with ELDK42 on the u-boot-arm/master for
>>> which I just sent a pull request.
>>>
>>> The raw result is:
>>>
>>> --------------------- SUMMARY ----------------------------
>>> Boards compiled: 283
>>> Boards with warnings or errors: 61 ( actux1_4_16 actux1_4_32 actux1_8_16
>>> actux1_8_32 actux2 actux3 actux4 ca9x4_ct_vxp cam_enc_4xx colibri_pxa270
>>> dvlhost efikamx efikasb ethernut5 flea3 harmony hawkboard hawkboard_uart
>>> highbank imx27lite imx31_litekit imx31_phycore imx31_phycore_eet
>>> km_kirkwood km_kirkwood_pci m28evk magnesium mcx medcom mgcoge3un
>>> mt_ventoux mx28evk mx31ads mx31pdk mx35pdk mx51evk mx53ard mx53evk
>>> mx53loco mx53smd mx6qarm2 mx6qsabrelite nhk8815 nhk8815_onenand
>>> omap1610h2_cs_autoboot omap1610inn_cs_autoboot paz00 pdnb3 plutux portl2
>>> qong scpu seaboard tt01 twister ventana vision2 vpac270_nor_128
>>> vpac270_nor_256 vpac270_ond_256 )
>>> ----------------------------------------------------------
>>>
>>> Of the 61 boards which partially or totally fail to build, some fail
>>> because the boards are big endian -- I don't count them in, that's my
>>> toolchain failing, not them. They are:
>>>
>>> actux1_4_16 actux1_4_32 actux1_8_16 actux1_8_32 actux2 actux3 actux4
>>> dvlhost pdnb3 scpu.
>>>
>>> However, 30 remainig boards share the same cause:
>>>
>>> ca9x4_ct_vxp colibri_pxa270 efikamx efikasb flea3 imx27lite
>>> imx31_litekit imx31_phycore_eet imx31_phycore m28evk magnesium mx28evk
>>> mx31ads mx31pdk mx35pdk mx51evk mx53ard mx53evk mx53loco mx53smd
>>> mx6qarm2 mx6qsabrelite nhk8815 nhk8815_onenand qong tt01 vision2
>>> vpac270_nor_128 vpac270_nor_256 vpac270_ond_256
>>>
>>> /home/uboot/src/u-boot-arm/common/main.c:717: undefined reference to
>>> `get_ticks'
>>> /home/uboot/src/u-boot-arm/common/main.c:717: undefined reference to
>>> `get_tbclk'
>>>
>>> (some only have one of the two errors)
>>>
>>> Also, 6 boards fail with the same error:
>>>
>>> harmony medcom paz00 plutux seaboard ventana (apparently all tegras)
>>>
>>> {standard input}: Assembler messages:
>>> {standard input}:568: Error: bad expression -- `ldr sp,=#1073872896'
>>>
>>> The rest:
>>>
>>> cam_enc_4xx ethernut5 hawkboard hawkboard_uart highbank km_kirkwood
>>> km_kirkwood_pci mcx mgcoge3un mt_ventoux omap1610h2_cs_autoboot
>>> omap1610inn_cs_autoboot portl2 twister
>>>
>>
>> I've posted a fix for highbank already:
>>
>> http://patchwork.ozlabs.org/patch/139020/
> 
> Now builds but still has warnings:

These are all unrelated to the fix.

> Configuring for highbank board...
> calxedaxgmac.c: In function 'xgmac_tx':
> calxedaxgmac.c:445: warning: passing argument 2 of
> 'desc_set_buf_addr_and_size' discards qualifiers from pointer target type
> cmd_pxe.c: In function 'do_pxe_get':
> cmd_pxe.c:334: warning: dereferencing type-punned pointer will break
> strict-aliasing rules
> cmd_pxe.c: In function 'get_relfile_envaddr':
> cmd_pxe.c:374: warning: dereferencing type-punned pointer will break
> strict-aliasing rules

I don't get these warnings with 4.6.1.

> highbank.c: In function 'board_eth_init':
> highbank.c:42: warning: implicit declaration of function
> 'calxedaxgmac_initialize'

This needs fixing.

> common/libcommon.o: In function `cread_line':
> /home/uboot/src/u-boot-arm/common/main.c:717: undefined reference to
> `get_tbclk'

Looks like it's gotten broken in a different way now. I'm sending out
some fixes in a minute.

Rob