From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ajay Bhargav Date: Mon, 13 Feb 2012 15:39:44 +0530 Subject: [U-Boot] [v2 4/4] Armada100: gplugD: Add FAT & EXT2 command support In-Reply-To: References: <1329123447-21617-1-git-send-email-ajay.bhargav@einfochips.com> <1329123447-21617-4-git-send-email-ajay.bhargav@einfochips.com> <201202131004.58578.marex@denx.de> Message-ID: <4F38E168.4020308@einfochips.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Monday 13 February 2012 02:59 PM, Prafulla Wadaskar wrote: > >> -----Original Message----- >> From: Marek Vasut [mailto:marex at denx.de] >> Sent: 13 February 2012 14:35 >> To: Ajay Bhargav >> Cc: linux at bohmer.net; Prafulla Wadaskar; u-boot at lists.denx.de >> Subject: Re: [v2 4/4] Armada100: gplugD: Add FAT& EXT2 command >> support >> >>> This patch adds FAT and ext2 command support for marvell gplugD >>> >>> Signed-off-by: Ajay Bhargav >>> --- >>> Changes for v2: >>> - added this new patch for command support >>> >>> include/configs/gplugd.h | 2 ++ >>> 1 files changed, 2 insertions(+), 0 deletions(-) >>> >>> diff --git a/include/configs/gplugd.h b/include/configs/gplugd.h >>> index 061ebe6..462cc7e 100644 >>> --- a/include/configs/gplugd.h >>> +++ b/include/configs/gplugd.h >>> @@ -73,6 +73,8 @@ >>> #define CONFIG_CMD_AUTOSCRIPT >>> #undef CONFIG_CMD_FPGA >>> #define CONFIG_CMD_USB >>> +#define CONFIG_CMD_EXT2 >>> +#define CONFIG_CMD_FAT >>> >>> /* Disable DCACHE */ >>> #define CONFIG_SYS_DCACHE_OFF >> Just squash it with the previous patch, it's related to it anyway ;- > Or you may exclude this patch from this series and post it as a standalone patch (in fact it is). > > Regards.. > Prafulla . . . > I better send a new one :) out of this patch series. Regards, Ajay Bhargav