From: Aneesh V <aneesh@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 2/4] arm: add %function attribute to assembly functions
Date: Sat, 18 Feb 2012 16:42:08 +0530 [thread overview]
Message-ID: <4F3F8788.90101@ti.com> (raw)
In-Reply-To: <201202171213.18516.vapier@gentoo.org>
On Friday 17 February 2012 10:43 PM, Mike Frysinger wrote:
> On Wednesday 15 February 2012 08:57:31 Aneesh V wrote:
>> This is done using the following directive preceding
>> each function definition:
>>
>> .type<func-name>, %function
>>
>> This marks the symbol as a function in the object
>> header which in turn helps the linker in some cases.
>>
>> In particular this was found needed for resolving ARM/Thumb
>> calls correctly in a build with Thumb interworking enabled.
>
> ideally arm would use the new linkage.h header and then these would change to
> doing what Linux does:
> ENTRY(foo)
> <asm>
> ENDPROC(foo)
Thanks for the info. So, what do you suggest? Fix only the problematic
function and leave the rest to be converted to the above form later?
br,
Aneesh
next prev parent reply other threads:[~2012-02-18 11:12 UTC|newest]
Thread overview: 83+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-02-06 11:37 [U-Boot] [RFC PATCH 0/4] Enable Thumb build for ARM platforms Aneesh V
2012-02-06 11:37 ` [U-Boot] [RFC PATCH 1/4] ARM: enable Thumb build Aneesh V
2012-02-06 18:45 ` Tom Rini
2012-02-07 7:43 ` Aneesh V
2012-02-06 11:37 ` [U-Boot] [RFC PATCH 2/4] OMAP3+: fix issues with " Aneesh V
2012-02-06 21:06 ` Albert ARIBAUD
2012-02-07 7:49 ` Aneesh V
2012-02-09 8:58 ` Aneesh V
2012-02-06 11:37 ` [U-Boot] [RFC PATCH 3/4] OMAP3+: Use -march=armv7-a and thereby enable Thumb-2 Aneesh V
2012-02-06 11:37 ` [U-Boot] [RFC PATCH 4/4] OMAP4: enable Thumb build Aneesh V
2012-02-06 12:26 ` [U-Boot] [RFC PATCH 0/4] Enable Thumb build for ARM platforms Aneesh V
2012-02-06 13:22 ` Aneesh V
2012-02-15 13:57 ` [U-Boot] [PATCH " Aneesh V
2012-02-15 13:57 ` [U-Boot] [PATCH 1/4] ARM: enable Thumb build Aneesh V
2012-02-15 13:57 ` [U-Boot] [PATCH 2/4] arm: add %function attribute to assembly functions Aneesh V
2012-02-17 11:09 ` Aneesh V
2012-02-18 10:13 ` Albert ARIBAUD
2012-02-18 13:24 ` Aneesh V
2012-02-18 15:04 ` Albert ARIBAUD
2012-02-18 16:34 ` Aneesh V
2012-02-18 16:48 ` Albert ARIBAUD
2012-02-20 16:08 ` Aneesh V
2012-02-23 11:06 ` Aneesh V
2012-02-17 17:13 ` Mike Frysinger
2012-02-18 11:12 ` Aneesh V [this message]
2012-02-18 11:34 ` Albert ARIBAUD
2012-02-18 22:03 ` Simon Glass
2012-02-19 7:15 ` Mike Frysinger
2012-02-20 20:07 ` Tom Rini
2012-02-20 21:53 ` Simon Glass
2012-02-21 4:19 ` Mike Frysinger
2012-02-21 4:44 ` Simon Glass
2012-02-21 14:33 ` Tom Rini
2012-02-21 15:42 ` Mike Frysinger
2012-02-21 18:03 ` Aneesh V
2012-02-21 19:28 ` Mike Frysinger
2012-02-21 20:01 ` Aneesh V
2012-02-21 4:18 ` Mike Frysinger
2012-02-15 13:57 ` [U-Boot] [PATCH 3/4] armv7: Use -march=armv7-a and thereby enable Thumb-2 Aneesh V
2012-02-15 13:57 ` [U-Boot] [PATCH 4/4] OMAP4: enable Thumb build Aneesh V
2012-02-23 13:39 ` [U-Boot] [PATCH v2 1/5] arm: adapt asm/linkage.h from Linux Aneesh V
2012-02-23 14:01 ` Aneesh V
2012-02-23 13:39 ` [U-Boot] [PATCH v2 2/5] armv7: add appropriate headers for assembly functions Aneesh V
2012-02-23 13:39 ` [U-Boot] [PATCH v2 3/5] ARM: enable Thumb build Aneesh V
2012-02-23 14:57 ` Mike Frysinger
2012-02-23 17:28 ` Aneesh V
2012-02-23 17:34 ` Tom Rini
2012-02-23 17:49 ` Aneesh V
2012-02-23 17:51 ` Tom Rini
2012-02-23 18:09 ` Aneesh V
2012-02-23 18:13 ` Aneesh V
2012-02-23 18:05 ` Mike Frysinger
2012-02-23 18:04 ` Mike Frysinger
2012-02-23 18:12 ` Aneesh V
2012-02-23 13:39 ` [U-Boot] [PATCH v2 4/5] armv7: Use -march=armv7-a and thereby enable Thumb-2 Aneesh V
2012-02-23 13:39 ` [U-Boot] [PATCH v2 5/5] OMAP4: enable Thumb build Aneesh V
2012-02-23 14:06 ` [U-Boot] [PATCH v3 1/6] arm: adapt asm/linkage.h from Linux Aneesh V
2012-02-23 14:59 ` Mike Frysinger
2012-02-23 15:24 ` Tom Rini
2012-02-23 16:57 ` Mike Frysinger
2012-02-23 17:40 ` Aneesh V
2012-02-23 23:52 ` Mike Frysinger
2012-02-24 10:30 ` Aneesh V
2012-02-23 14:06 ` [U-Boot] [PATCH v3 2/6] armv7: add appropriate headers for assembly functions Aneesh V
2012-02-23 14:59 ` Mike Frysinger
2012-02-23 14:06 ` [U-Boot] [PATCH v3 3/6] ARM: enable Thumb build Aneesh V
2012-02-23 14:06 ` [U-Boot] [PATCH v3 4/6] armv7: Use -march=armv7-a and thereby enable Thumb-2 Aneesh V
2012-02-23 15:05 ` Mike Frysinger
2012-02-23 17:50 ` Aneesh V
2012-02-23 14:06 ` [U-Boot] [PATCH v3 5/6] omap4+: Avoid using __attribute__ ((__packed__)) Aneesh V
2012-02-23 14:21 ` Tom Rini
2012-02-23 14:56 ` Aneesh V
2012-02-23 15:03 ` Mike Frysinger
2012-02-23 15:03 ` Mike Frysinger
2012-02-23 15:42 ` Aneesh V
2012-02-23 14:06 ` [U-Boot] [PATCH v3 6/6] OMAP4: enable Thumb build Aneesh V
2012-03-08 17:10 ` [U-Boot] [PATCH 1/6] arm: adapt asm/linkage.h from Linux Aneesh V
2012-03-08 17:14 ` Aneesh V
2012-03-08 17:10 ` [U-Boot] [PATCH 2/6] armv7: add appropriate headers for assembly functions Aneesh V
2012-03-08 17:10 ` [U-Boot] [PATCH 3/6] ARM: enable Thumb build Aneesh V
2012-03-08 17:10 ` [U-Boot] [PATCH 4/6] armv7: Use -march=armv7-a and thereby enable Thumb-2 Aneesh V
2012-03-08 17:10 ` [U-Boot] [PATCH 5/6] omap4+: Avoid using __attribute__ ((__packed__)) Aneesh V
2012-03-08 17:10 ` [U-Boot] [PATCH 6/6] OMAP4: enable Thumb build Aneesh V
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4F3F8788.90101@ti.com \
--to=aneesh@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox