From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Mon, 20 Feb 2012 07:57:05 +0100 Subject: [U-Boot] [PATCH 0/4 v5] i.MX28: Fix ref_cpu clock setup In-Reply-To: <4F40BF83.5000009@aribaud.net> References: <1329301803-11624-1-git-send-email-robert@delien.nl> <4F40BF83.5000009@aribaud.net> Message-ID: <4F41EEC1.9040109@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 19/02/2012 10:23, Albert ARIBAUD wrote: > Hi Robert, > > Le 15/02/2012 11:29, Robert at domain.unknown a ?crit : >> From: Robert Delien >> >> This set of patches fixes ref_cpu clock setup. >> >> Robert Delien (4): >> Renamed mx28_register to mx28_register_32 to prepare for >> mx28_register_8 >> Introducing 8-bit wide register, mx28_register_8 >> Fix erroneous 32-bit access to hw_clkctrl_frac0 and hw_clkctrl_frac1 >> registers >> Preventing needless switching on and off PLL bypass mode, allowing >> allow single-stepping through the SPL > P > I don't see this V5 on patchwork. Please a V6 with up-to-date Tested-By > / Acked-By etc -- and of course make sure the e-mail address stays correct. > > Besides, this touches i.MX, so I think Stefano should be at least Cc: Right - Robert, I miss also which is the state of the current patches - is there still an issue that avoid boards to boot ? Stefano -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de =====================================================================