[U-Boot] [PATCH 0/4 v5] i.MX28: Fix ref_cpu clock setup

[Albert ARIBAUD <albert.u.boot@aribaud.net>]

Le 20/02/2012 08:40, Marek Vasut a ?crit :
>> On 19/02/2012 10:23, Albert ARIBAUD wrote:
>>> Hi Robert,
>>>
>>> Le 15/02/2012 11:29, Robert at domain.unknown a ?crit :
>>>> From: Robert Delien<robert@delien.nl>
>>>>
>>>> This set of patches fixes ref_cpu clock setup.
>>>>
>>>> Robert Delien (4):
>>>>     Renamed mx28_register to mx28_register_32 to prepare for
>>>>
>>>>       mx28_register_8
>>>>
>>>>     Introducing 8-bit wide register, mx28_register_8
>>>>     Fix erroneous 32-bit access to hw_clkctrl_frac0 and hw_clkctrl_frac1
>>>>
>>>>       registers
>>>>
>>>>     Preventing needless switching on and off PLL bypass mode, allowing
>>>>
>>>>       allow single-stepping through the SPL
>>>
>>> P
>>> I don't see this V5 on patchwork. Please a V6 with up-to-date Tested-By
>>> / Acked-By etc -- and of course make sure the e-mail address stays
>>> correct.
>>
>>> Besides, this touches i.MX, so I think Stefano should be at least Cc:
>> Right - Robert, I miss also which is the state of the current patches -
>> is there still an issue that avoid boards to boot ?
>
> Yea ... that issue is fixed. I acked patches 1,2,3 ... I'm still unsure about
> patch 4.
>
> M
>>
>> Stefano

I had an offline e-mail exchange with Robert, the conclusion of which is 
that he will not follow up on the patch series and we should cancel it.

Amicalement,
-- 
Albert.