From mboxrd@z Thu Jan 1 00:00:00 1970 From: Albert ARIBAUD Date: Mon, 20 Feb 2012 08:50:16 +0100 Subject: [U-Boot] [PATCH 0/4 v5] i.MX28: Fix ref_cpu clock setup In-Reply-To: <201202200840.16263.marek.vasut@gmail.com> References: <1329301803-11624-1-git-send-email-robert@delien.nl> <4F40BF83.5000009@aribaud.net> <4F41EEC1.9040109@denx.de> <201202200840.16263.marek.vasut@gmail.com> Message-ID: <4F41FB38.40104@aribaud.net> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Le 20/02/2012 08:40, Marek Vasut a ?crit : >> On 19/02/2012 10:23, Albert ARIBAUD wrote: >>> Hi Robert, >>> >>> Le 15/02/2012 11:29, Robert at domain.unknown a ?crit : >>>> From: Robert Delien >>>> >>>> This set of patches fixes ref_cpu clock setup. >>>> >>>> Robert Delien (4): >>>> Renamed mx28_register to mx28_register_32 to prepare for >>>> >>>> mx28_register_8 >>>> >>>> Introducing 8-bit wide register, mx28_register_8 >>>> Fix erroneous 32-bit access to hw_clkctrl_frac0 and hw_clkctrl_frac1 >>>> >>>> registers >>>> >>>> Preventing needless switching on and off PLL bypass mode, allowing >>>> >>>> allow single-stepping through the SPL >>> >>> P >>> I don't see this V5 on patchwork. Please a V6 with up-to-date Tested-By >>> / Acked-By etc -- and of course make sure the e-mail address stays >>> correct. >> >>> Besides, this touches i.MX, so I think Stefano should be at least Cc: >> Right - Robert, I miss also which is the state of the current patches - >> is there still an issue that avoid boards to boot ? > > Yea ... that issue is fixed. I acked patches 1,2,3 ... I'm still unsure about > patch 4. > > M >> >> Stefano I had an offline e-mail exchange with Robert, the conclusion of which is that he will not follow up on the patch series and we should cancel it. Amicalement, -- Albert.