From: Stefano Babic <sbabic@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 8/9] MX53: Add support to ESG ima3 board
Date: Wed, 22 Feb 2012 11:46:02 +0100 [thread overview]
Message-ID: <4F44C76A.6070000@denx.de> (raw)
In-Reply-To: <4F44C3E2.2020706@de.bosch.com>
On 22/02/2012 11:30, Dirk Behme wrote:
> On 22.02.2012 11:24, Stefano Babic wrote:
> ...
>> It boots from NOR (128 MB)
>
> Ah. I wonder why I was under the impression that I was the only guy
> fighting with the imximage NOR header pain, then ;)
When something goes wrong, it does for everybody...
>
>> diff --git a/board/esg/ima3-mx53/imximage.cfg
>> b/board/esg/ima3-mx53/imximage.cfg
>> new file mode 100644
>> index 0000000..fa6b42d
>> --- /dev/null
>> +++ b/board/esg/ima3-mx53/imximage.cfg
> ...
>> +# Boot Device : one of
>> +# spi, sd (the board has no nand neither onenand)
>
> Maybe the above comment should be updated for nor? ;)
Yes, I'll do
>
>> +BOOT_FROM nor
>
> I assume that you have tested this and it works with the imximage?
I have not any problem with the current imximage, so I am quite
confused. Agree that you are fixing a bug, but I have not understood why
I have not seen any issue on my board, a MX53 using V2 image header.
My board boots flawlessly from the NOR interface. I will try to
investigate why and, of course, I will be able to test your patch on my
board.
Can you confirm that your board does not boot ? Or are there other
symptoms ?
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
next prev parent reply other threads:[~2012-02-22 10:46 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-02-22 10:24 [U-Boot] [PATCH 1/9] Define UART4 and UART5 base addresses Stefano Babic
2012-02-22 10:24 ` [U-Boot] [PATCH 2/9] NET: fec_mxc.c: Add support for MII for MX5 SOCs Stefano Babic
2012-05-15 12:39 ` Dirk Behme
2012-06-12 17:02 ` Stefano Babic
2012-02-22 10:24 ` [U-Boot] [PATCH 3/9] NET: fec_mxc.c: Add a way to disable auto negotiation Stefano Babic
2012-02-22 10:24 ` [U-Boot] [PATCH 4/9] MX5: Add definitions for SATA controller Stefano Babic
2012-02-22 10:24 ` [U-Boot] [PATCH 5/9] SATA: check for return value from sata functions Stefano Babic
2012-02-22 10:24 ` [U-Boot] [PATCH 6/9] MX53: add function to set SATA clock to internal Stefano Babic
2012-02-22 10:24 ` [U-Boot] [PATCH 7/9] SATA: add driver for MX5 / MX6 SOCs Stefano Babic
2012-02-22 10:24 ` [U-Boot] [PATCH 8/9] MX53: Add support to ESG ima3 board Stefano Babic
2012-02-22 10:30 ` Dirk Behme
2012-02-22 10:46 ` Stefano Babic [this message]
2012-02-22 11:46 ` Dirk Behme
2012-02-22 10:24 ` [U-Boot] [PATCH 9/9] MX53: mx53loco: Add SATA support Stefano Babic
2012-02-23 15:40 ` Jason Hui
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4F44C76A.6070000@denx.de \
--to=sbabic@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox