From mboxrd@z Thu Jan  1 00:00:00 1970
From: Stefano Babic <sbabic@denx.de>
Date: Wed, 22 Feb 2012 11:46:02 +0100
Subject: [U-Boot] [PATCH 8/9] MX53: Add support to ESG ima3 board
In-Reply-To: <4F44C3E2.2020706@de.bosch.com>
References: <1329906281-15180-1-git-send-email-sbabic@denx.de>
	<1329906281-15180-8-git-send-email-sbabic@denx.de>
	<4F44C3E2.2020706@de.bosch.com>
Message-ID: <4F44C76A.6070000@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On 22/02/2012 11:30, Dirk Behme wrote:
> On 22.02.2012 11:24, Stefano Babic wrote:
> ...
>> It boots from NOR (128 MB)
> 
> Ah. I wonder why I was under the impression that I was the only guy
> fighting with the imximage NOR header pain, then ;)

When something goes wrong, it does for everybody...

> 
>> diff --git a/board/esg/ima3-mx53/imximage.cfg
>> b/board/esg/ima3-mx53/imximage.cfg
>> new file mode 100644
>> index 0000000..fa6b42d
>> --- /dev/null
>> +++ b/board/esg/ima3-mx53/imximage.cfg
> ...
>> +# Boot Device : one of
>> +# spi, sd (the board has no nand neither onenand)
> 
> Maybe the above comment should be updated for nor? ;)

Yes, I'll do

> 
>> +BOOT_FROM      nor
> 
> I assume that you have tested this and it works with the imximage?

I have not any problem with the current imximage, so I am quite
confused. Agree that you are fixing a bug, but I have not understood why
I have not seen any issue on my board, a MX53 using V2 image header.

My board boots flawlessly from the NOR interface. I will try to
investigate why and, of course, I will be able to test your patch on my
board.

Can you confirm that your board does not boot ? Or are there other
symptoms ?

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================