From: Dirk Behme <dirk.behme@googlemail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2] mx31: Setup AIPS registers
Date: Wed, 29 Feb 2012 21:03:07 +0100 [thread overview]
Message-ID: <4F4E847B.9000406@googlemail.com> (raw)
In-Reply-To: <1330544699-21814-1-git-send-email-festevam@gmail.com>
On 29.02.2012 20:44, Fabio Estevam wrote:
> Setup mx31 AIPS registers.
>
> It was verified on a mx31pdk that without the AIPS settings it is not possible
> to run audio playback.
>
> Signed-off-by: Fabio Estevam<fabio.estevam@freescale.com>
Hmm, sorry if I missed anything because it's too late here. But:
Why now an U-Boot patch? What's about the kernel patch you sent earlier?
http://www.spinics.net/lists/arm-kernel/msg162109.html
And why don't you try to create some common parts with
http://git.denx.de/cgi-bin/gitweb.cgi?p=u-boot.git;a=commitdiff;h=f2f7745825ee5f6bae5b480c8e9c6641a7ffa73b
?
Sorry again if I missed anything, best regards
Dirk
> ---
> Changes since v1:
> - Use CONFIG_ARCH_CPU_INIT
> - Zero-out the 8 MSB of opacr4
> - Confirmed that audio playback does work
>
> arch/arm/cpu/arm1136/mx31/generic.c | 46 +++++++++++++++++++++++++++++
> arch/arm/include/asm/arch-mx31/imx-regs.h | 13 ++++++++
> include/configs/mx31pdk.h | 1 +
> 3 files changed, 60 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/cpu/arm1136/mx31/generic.c b/arch/arm/cpu/arm1136/mx31/generic.c
> index d60afc9..a401c9a 100644
> --- a/arch/arm/cpu/arm1136/mx31/generic.c
> +++ b/arch/arm/cpu/arm1136/mx31/generic.c
> @@ -228,3 +228,49 @@ int print_cpuinfo(void)
> return 0;
> }
> #endif
> +
> +#ifdef CONFIG_ARCH_CPU_INIT
> +void init_aips(void)
> +{
> + struct aipstz_regs *aips1, *aips2;
> + unsigned int reg;
> +
> + aips1 = (struct aipstz_regs *)MX31_AIPS1_BASE_ADDR;
> + aips2 = (struct aipstz_regs *)MX31_AIPS2_BASE_ADDR;
> +
> + /*
> + * Set all MPROTx to be non-bufferable, trusted for R/W,
> + * not forced to user-mode.
> + */
> + writel(0x77777777,&aips1->mprot0);
> + writel(0x77777777,&aips1->mprot1);
> + writel(0x77777777,&aips2->mprot0);
> + writel(0x77777777,&aips2->mprot1);
> +
> + /*
> + * Set all OPACRx to be non-bufferable, not require
> + * supervisor privilege level for access, allow for
> + * write access and untrusted master access.
> + */
> + writel(0x0,&aips1->opacr0);
> + writel(0x0,&aips1->opacr1);
> + writel(0x0,&aips1->opacr2);
> + writel(0x0,&aips1->opacr3);
> + reg = readl(&aips1->opacr4)& 0x00FFFFFF;
> + writel(reg,&aips1->opacr4);
> +
> + writel(0x0,&aips2->opacr0);
> + writel(0x0,&aips2->opacr1);
> + writel(0x0,&aips2->opacr2);
> + writel(0x0,&aips2->opacr3);
> + reg = readl(&aips2->opacr4)& 0x00FFFFFF;
> + writel(reg,&aips2->opacr4);
> +}
> +
> +int arch_cpu_init(void)
> +{
> + init_aips();
> +
> + return 0;
> +}
> +#endif
> diff --git a/arch/arm/include/asm/arch-mx31/imx-regs.h b/arch/arm/include/asm/arch-mx31/imx-regs.h
> index 6454acb..11069af 100644
> --- a/arch/arm/include/asm/arch-mx31/imx-regs.h
> +++ b/arch/arm/include/asm/arch-mx31/imx-regs.h
> @@ -539,6 +539,18 @@ struct esdc_regs {
> u32 dlyl;
> };
>
> +/* AIPS registers */
> +struct aipstz_regs {
> + u32 mprot0;
> + u32 mprot1;
> + u32 rsvd[0xe];
> + u32 opacr0;
> + u32 opacr1;
> + u32 opacr2;
> + u32 opacr3;
> + u32 opacr4;
> +};
> +
> #endif
>
> #define __REG(x) (*((volatile u32 *)(x)))
> @@ -873,6 +885,7 @@ struct esdc_regs {
> #define IRAM_SIZE (16 * 1024)
>
> #define MX31_AIPS1_BASE_ADDR 0x43f00000
> +#define MX31_AIPS2_BASE_ADDR 0x53f00000
> #define IMX_USB_BASE (MX31_AIPS1_BASE_ADDR + 0x88000)
>
> /* USB portsc */
> diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h
> index 4da6020..623b1f7 100644
> --- a/include/configs/mx31pdk.h
> +++ b/include/configs/mx31pdk.h
> @@ -40,6 +40,7 @@
>
> #define CONFIG_DISPLAY_CPUINFO
> #define CONFIG_DISPLAY_BOARDINFO
> +#define CONFIG_ARCH_CPU_INIT
>
> #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
> #define CONFIG_SETUP_MEMORY_TAGS
next prev parent reply other threads:[~2012-02-29 20:03 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-02-29 19:44 [U-Boot] [PATCH v2] mx31: Setup AIPS registers Fabio Estevam
2012-02-29 20:03 ` Dirk Behme [this message]
2012-02-29 20:56 ` Fabio Estevam
2012-03-01 6:30 ` Dirk Behme
2012-03-01 12:29 ` Fabio Estevam
2012-03-03 9:59 ` Stefano Babic
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4F4E847B.9000406@googlemail.com \
--to=dirk.behme@googlemail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox