[U-Boot] [PATCH 1/3] i.MX6: mx6qsabrelite: add CONFIG_REVISION_TAG

[Eric Nelson <eric.nelson@boundarydevices.com>]

On 03/02/2012 03:59 PM, Marek Vasut wrote:
>>   Freescale 2.6.38 (Non-DT) kernels require the revision atag to
>>   enable the VPU.
>>
>> Signed-off-by: Eric Nelson<eric.nelson@boundarydevices.com>
>> ---
>>   board/freescale/mx6qsabrelite/mx6qsabrelite.c |    7 +++++++
>>   include/configs/mx6qsabrelite.h               |    1 +
>>   2 files changed, 8 insertions(+), 0 deletions(-)
>>
>> diff --git a/board/freescale/mx6qsabrelite/mx6qsabrelite.c
>> b/board/freescale/mx6qsabrelite/mx6qsabrelite.c index db1bea9..590030b
>> 100644
>> --- a/board/freescale/mx6qsabrelite/mx6qsabrelite.c
>> +++ b/board/freescale/mx6qsabrelite/mx6qsabrelite.c
>> @@ -215,6 +215,13 @@ int board_mmc_init(bd_t *bis)
>>   }
>>   #endif
>>
>> +#ifdef CONFIG_REVISION_TAG
>> +u32 get_board_rev(void)
>> +{
>> +	return 0x63000 ;
>> +}
>> +#endif
>> +
>>   #ifdef CONFIG_MXC_SPI
>>   iomux_v3_cfg_t ecspi1_pads[] = {
>>   	/* SS1 */
>> diff --git a/include/configs/mx6qsabrelite.h
>> b/include/configs/mx6qsabrelite.h index 93000f0..85f6f7a 100644
>> --- a/include/configs/mx6qsabrelite.h
>> +++ b/include/configs/mx6qsabrelite.h
>> @@ -33,6 +33,7 @@
>>   #define CONFIG_CMDLINE_TAG
>>   #define CONFIG_SETUP_MEMORY_TAGS
>>   #define CONFIG_INITRD_TAG
>> +#define CONFIG_REVISION_TAG
>
> I think you can avoid this define altogether, you're using it anyway.
>
Hi Marek,

I'm not sure I understand.

I need to define CONFIG_REVISION_TAG in order to get bootm to add
the tag:
	http://git.denx.de/?p=u-boot.git;a=blob;f=arch/arm/lib/bootm.c;h=afa0093df7620606ee12b4dc1dd2ee37adee347c;hb=master#l137

I made get_board_rev() conditional so we can get rid of it if (once)
we're only using DT kernels.