[U-Boot] cam_enc_4xx build failure

Heiko Schocher
2012-03-05T08:39:39Z

Hello Marek,

Marek Vasut wrote:
> Dear Heiko Schocher,
>
> cam_enc_4xx does not build with ELDK4.2 . Can you please come up with a patch?

Hups, tested only with ELDK-5.1 compile/works fine!

> Thanks in advance!
>
> Copyright (C) 2007 Free Software Foundation, Inc.
> This is free software; see the source for copying conditions. There is NO
> warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
>
> Configuring for cam_enc_4xx board...
> cam_enc_4xx.c: In function 'menu_handle':
> cam_enc_4xx.c:609: warning: dereferencing type-punned pointer will break strict-
> aliasing rules

fixed

> arm-linux-ld: u-boot-spl: Not enough room for program headers, try linking with
> -N

Hmm.. I need here this patch (for ELDK-4.2 only):

diff --git a/config.mk b/config.mk
index ddaa477..1aaf2a2 100644
--- a/config.mk
+++ b/config.mk
@@ -254,7 +254,7 @@ ifneq ($(CONFIG_SYS_TEXT_BASE),)
LDFLAGS_u-boot += -Ttext $(CONFIG_SYS_TEXT_BASE)
endif

-LDFLAGS_u-boot-spl += -T $(obj)u-boot-spl.lds $(LDFLAGS_FINAL)
+LDFLAGS_u-boot-spl += -N -T $(obj)u-boot-spl.lds $(LDFLAGS_FINAL)
ifneq ($(CONFIG_SPL_TEXT_BASE),)
LDFLAGS_u-boot-spl += -Ttext $(CONFIG_SPL_TEXT_BASE)
endif

compiles/works with ELDK-4.2 compiles/works with ELDK-5.1 ...

a) better ideas for a fix?
b) If patch is OK, should I send for this issue in a seperate patch?

> arm-linux-ld: final link failed: Bad value
> make[1]: *** [/opt/work/jenkins/jobs/U-
> Boot/workspace/workspace/compiler/eldk4.2/device/arm___cam_enc_4xx/spl/u-boot-
> spl] Error 1
> make: *** [spl/u-boot-spl.bin] Error 2
> make: *** Waiting for unfinished jobs....
> cmd_pxe.c: In function 'do_pxe_get':
> cmd_pxe.c:334: warning: dereferencing type-punned pointer will break strict-
> aliasing rules
> cmd_pxe.c: In function 'get_relfile_envaddr':
> cmd_pxe.c:374: warning: dereferencing type-punned pointer will break strict-
> aliasing rules
> arm-linux-size: './u-boot': No such file

added Jason Hobbs <jason.hobbs@calxeda.com> to Cc.

Jason? Could you fix this?

Removed cmd_pxe support for the cam_enc_4xx board, as it is not needed.

Thanks!

bye,
Heiko