From mboxrd@z Thu Jan 1 00:00:00 1970 From: Albert ARIBAUD Date: Mon, 05 Mar 2012 13:37:29 +0100 Subject: [U-Boot] [GIT PULL] Pull request: u-boot-imx In-Reply-To: <4F5202CA.7010901@denx.de> References: <4F5202CA.7010901@denx.de> Message-ID: <4F54B389.2070905@aribaud.net> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Stefano, Le 03/03/2012 12:38, Stefano Babic a ?crit : > Hi Albert, > > please pull from u-boot-imx, thanks. > > The following changes since commit 2271e7c6e8eef883b834fb7d07911848a54fde13: > > Ethernut 5: fix build error (2012-02-29 01:06:56 +0100) > > are available in the git repository at: > git://www.denx.de/git/u-boot-imx.git master > > Dirk Behme (1): > mx6q: mx6qsabrelite: Update the README > > Marek Vasut (3): > M28: Fix LCD PINMUX > M28: Support for the old M28 SoM v1.0 > i.MX28: Reformat the DRAM memory configuration data > > Robert Delien (5): > i.mx28: Added register definitions for DIGCTL registers > i.mx28: Replaced magic numbers for scratch register addresses with > register definitions > Renamed mx28_register to mx28_register_32 to prepare for > mx28_register_8 > Introducing 8-bit wide register, mx28_register_8 > Fix erroneous 32-bit access to hw_clkctrl_frac0 and > hw_clkctrl_frac1 registers > > Wolfgang Grandegger (2): > usb/ehci: Add USB support for the MX6Q > mx6qsabrelite: add and enable USB Host 1 support > > arch/arm/cpu/arm926ejs/mx28/clock.c | 74 +++----- > arch/arm/cpu/arm926ejs/mx28/iomux.c | 6 +- > arch/arm/cpu/arm926ejs/mx28/mx28.c | 14 +- > arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c | 120 ++++++------ > arch/arm/cpu/armv7/mx6/clock.c | 13 ++ > arch/arm/include/asm/arch-mx28/imx-regs.h | 1 + > arch/arm/include/asm/arch-mx28/regs-apbh.h | 254 > ++++++++++++------------ > arch/arm/include/asm/arch-mx28/regs-bch.h | 42 ++-- > arch/arm/include/asm/arch-mx28/regs-clkctrl.h | 98 ++++------ > arch/arm/include/asm/arch-mx28/regs-common.h | 28 ++- > arch/arm/include/asm/arch-mx28/regs-digctl.h | 155 +++++++++++++++ > arch/arm/include/asm/arch-mx28/regs-gpmi.h | 26 ++-- > arch/arm/include/asm/arch-mx28/regs-i2c.h | 28 ++-- > arch/arm/include/asm/arch-mx28/regs-ocotp.h | 86 ++++---- > arch/arm/include/asm/arch-mx28/regs-pinctrl.h | 168 ++++++++-------- > arch/arm/include/asm/arch-mx28/regs-power.h | 28 ++-- > arch/arm/include/asm/arch-mx28/regs-rtc.h | 28 ++-- > arch/arm/include/asm/arch-mx28/regs-ssp.h | 40 ++-- > arch/arm/include/asm/arch-mx28/regs-timrot.h | 38 ++-- > arch/arm/include/asm/arch-mx28/regs-usbphy.h | 20 +- > arch/arm/include/asm/arch-mx28/sys_proto.h | 10 +- > arch/arm/include/asm/arch-mx6/clock.h | 1 + > arch/arm/include/asm/arch-mx6/imx-regs.h | 3 + > board/denx/m28evk/spl_boot.c | 16 +- > board/freescale/mx6qsabrelite/mx6qsabrelite.c | 18 ++ > doc/README.mx6qsabrelite | 12 +- > drivers/gpio/mxs_gpio.c | 16 +- > drivers/usb/host/Makefile | 1 + > drivers/usb/host/ehci-mx6.c | 205 ++++++++++++++++++++ > drivers/usb/host/ehci-mxs.c | 8 +- > include/configs/mx6qsabrelite.h | 13 ++ > 31 files changed, 988 insertions(+), 582 deletions(-) > create mode 100644 arch/arm/include/asm/arch-mx28/regs-digctl.h > create mode 100644 drivers/usb/host/ehci-mx6.c > > Best regards, > Stefano Babic Applied to u-boot-arm/master, thanks. Amicalement, -- Albert.