From mboxrd@z Thu Jan 1 00:00:00 1970 From: Heiko Schocher Date: Wed, 07 Mar 2012 08:10:11 +0100 Subject: [U-Boot] cam_enc_4xx build failure In-Reply-To: <201203050713.51779.marex@denx.de> References: <201203050713.51779.marex@denx.de> Message-ID: <4F5709D3.1070800@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hello Marek, added Tom Rini to cc... Marek Vasut wrote: > Dear Heiko Schocher, > > cam_enc_4xx does not build with ELDK4.2 . Can you please come up with a patch? > > Thanks in advance! > > Copyright (C) 2007 Free Software Foundation, Inc. > This is free software; see the source for copying conditions. There is NO > warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. > > Configuring for cam_enc_4xx board... > cam_enc_4xx.c: In function 'menu_handle': > cam_enc_4xx.c:609: warning: dereferencing type-punned pointer will break strict- > aliasing rules > arm-linux-ld: u-boot-spl: Not enough room for program headers, try linking with > -N > arm-linux-ld: final link failed: Bad value If I try a SPL_TEXT_BASE = 0x00000000 or SPL_TEXT_BASE = 0x00000080 it compiles fine with ELDK-4.2, but I need SPL_TEXT_BASE = 0x00000020 as the RBL copies code from nand to 0x00000020 ... I can fix this with this patch: diff --git a/board/ait/cam_enc_4xx/config.mk b/board/ait/cam_enc_4xx/config.mk index b1f9b6c..744b927 100644 --- a/board/ait/cam_enc_4xx/config.mk +++ b/board/ait/cam_enc_4xx/config.mk @@ -12,4 +12,11 @@ PAD_TO := 12320 UBL_CONFIG = $(SRCTREE)/board/$(BOARDDIR)/ublimage.cfg ifndef CONFIG_SPL_BUILD ALL-y += $(obj)u-boot.ubl +else +# as SPL_TEXT_BASE is not page-aligned, we need for some +# linkers the -n flag (Do not page align data), to prevent +# the following error message: +# arm-linux-ld: u-boot-spl: Not enough room for program headers, try linking +# with -N +LDFLAGS_u-boot-spl += -n endif I must admit, that I do not really understand, whats the real problem is. Can somebody help here? bye, Heiko -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany