[U-Boot] [PATCH] USB:host: Attribute packed removed from usb structures

[Amit Virdi <amit.virdi@st.com>]

Dear Marek,

On 3/7/2012 5:08 PM, Marek Vasut wrote:
> Dear Amit Virdi,
>
>> Dear Marek,
>>
>>>> I did the changes suggested by you and tested the build. The issue
>>>> didn't come up. Then I reverted the code to the original (attributes
>>>> retained and ehci directly de-referencing the pointers. The issue didn't
>>>> come here too.
>>>>
>>>> Today, I used armv7-linux-gcc (GCC) v4.6.2
>>>> So I suspect there has been some fix done in the GCC.
>>>>
>>>> Now, even with the packed attributes, the word fields are accessed
>>>> word-by-word in contrast to the earlier observed behavior
>>>> (byte-by-byte). I could see ldr and str in the disassembly.
>>>>
>>>> May be, we can discard this patch and keep drivers/usb/host/ehci.h
>>>> intact.
>>>
>>> Can you check with different toolchain please?
>>
>> Do you mean different toolchains for ARM? I can surely check if you can
>> help me. I have used ST's internal distribution till date and I guess I
>> need to download and install other ARM toolchains in order to verify
>> this issue.
>
> Sure, you can download the ELDK installer for ELDK 5.1 :-)

Ok. I keep this in my "To do" list. As soon as I get some spare time, 
I'll install the toolchain and test the build on my SPEAr320 eval board.

>>
>> Or, we can work this way that my source code is compiled by someone
>> already installed/using other tool chains. I can test it on my board and
>> report the results?
>
> Yes please. I'll most likely apply your other patchset, but let's keep an eye on
> this patch, it might come handy later if the issue reappears.
>

Ok, thanks.

Regards
Amit Virdi