From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Tue, 13 Mar 2012 09:28:10 +0100 Subject: [U-Boot] [PATCH V3] i.MX6: mx6q_sabrelite: add CONFIG_REVISION_TAG In-Reply-To: <1331600652-30247-1-git-send-email-eric.nelson@boundarydevices.com> References: <1331600652-30247-1-git-send-email-eric.nelson@boundarydevices.com> Message-ID: <4F5F051A.6040609@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 13/03/2012 02:04, Eric Nelson wrote: > This is needed to support Freescale-supplied userspaces. > > At the moment, both the IPU and VPU libraries provided by Freescale > in the "imx-lib" package contain routines which scrape the system > revision from /proc/cpuinfo. In the VPU library, this information is > used to load the proper firmware, allowing a single binary to be used > across various i.MX processors. > Hi Eric, > V3 removes the conditional surrounding get_board_rev() as requested by > Marek. This lines are your changelog and should be not in the commit message. They must be after the "---" line. > > Signed-off-by: Eric Nelson > --- > board/freescale/mx6qsabrelite/mx6qsabrelite.c | 5 +++++ > include/configs/mx6qsabrelite.h | 1 + > 2 files changed, 6 insertions(+), 0 deletions(-) > > diff --git a/board/freescale/mx6qsabrelite/mx6qsabrelite.c b/board/freescale/mx6qsabrelite/mx6qsabrelite.c > index 7fe2dc9..1d09a72 100644 > --- a/board/freescale/mx6qsabrelite/mx6qsabrelite.c > +++ b/board/freescale/mx6qsabrelite/mx6qsabrelite.c > @@ -215,6 +215,11 @@ int board_mmc_init(bd_t *bis) > } > #endif > > +u32 get_board_rev(void) > +{ > + return 0x63000 ; > +} > + > #ifdef CONFIG_MXC_SPI > iomux_v3_cfg_t ecspi1_pads[] = { > /* SS1 */ > diff --git a/include/configs/mx6qsabrelite.h b/include/configs/mx6qsabrelite.h > index bb3a46b..a1a2267 100644 > --- a/include/configs/mx6qsabrelite.h > +++ b/include/configs/mx6qsabrelite.h > @@ -33,6 +33,7 @@ > #define CONFIG_CMDLINE_TAG > #define CONFIG_SETUP_MEMORY_TAGS > #define CONFIG_INITRD_TAG > +#define CONFIG_REVISION_TAG > > /* Size of malloc() pool */ > #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024) Apart of that: Acked-by: Stefano Babic Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de =====================================================================