From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Tue, 13 Mar 2012 16:49:15 +0100 Subject: [U-Boot] [PATCH v2] mx6: Read silicon revision from register In-Reply-To: <4F5F6A64.9070603@boundarydevices.com> References: <1331648310-13064-1-git-send-email-fabio.estevam@freescale.com> <4F5F6A64.9070603@boundarydevices.com> Message-ID: <4F5F6C7B.5010903@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 13/03/2012 16:40, Eric Nelson wrote: > On 03/13/2012 07:18 AM, Fabio Estevam wrote: >> Instead of hardcoding the mx6 silicon revision, read it from the >> proper register. >> >> Signed-off-by: Fabio Estevam >> --- >> Changes since v1: >> - Fix typo on Subject >> arch/arm/cpu/armv7/mx6/soc.c | 3 ++- >> 1 files changed, 2 insertions(+), 1 deletions(-) >> >> diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c >> index 2ac74b5..639bf30 100644 >> --- a/arch/arm/cpu/armv7/mx6/soc.c >> +++ b/arch/arm/cpu/armv7/mx6/soc.c >> @@ -32,7 +32,8 @@ >> >> u32 get_cpu_rev(void) >> { >> - int system_rev = 0x61000 | CHIP_REV_1_0; >> + int reg = readl(ANATOP_BASE_ADDR + 0x260)& 0xFF; >> + int system_rev = 0x61000 | 0x10 + reg; >> >> return system_rev; >> } > > Nice! > MX6Q SABRELITE U-Boot > md 0x20C8260 1 > 020c8260: 00630000 ..c. > > This beats the heck out of my hack: > http://lists.denx.de/pipermail/u-boot/2012-March/120102.html > > Now the question is how get_cpu_rev() relates to get_board_rev(). Really they should be unrelated.....I know, we have several cases where the board revision contains the cpu, but in u-boot they are unrelated. get_board_rev() should only have the revision of the board, if any. > > We had a discussion a while back about reserving some space in OTP > to allow per-board revision information. > > Fabio, do you have any guidance about how/whether the system_rev > should be updated to include a board revision? Do you mean which is the version to be put to make the imxlib happy ? Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de =====================================================================