From: Eric Nelson <eric.nelson@boundarydevices.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH V3] net: fec_mxc: allow use with cache enabled
Date: Wed, 14 Mar 2012 12:12:10 -0700 [thread overview]
Message-ID: <4F60ED8A.8090400@boundarydevices.com> (raw)
In-Reply-To: <201203140141.23737.vapier@gentoo.org>
On 03/13/2012 10:41 PM, Mike Frysinger wrote:
> On Wednesday 14 March 2012 01:12:38 Eric Nelson wrote:
>> Most of the PPC devices seem to have values of 16 or 32
>> for ARCH_DMA_MINALIGN, but PPC64BRIDGE and E500MC would
>> have a problem if their drivers don't implement a bounce
>> buffer because PKTALIGN< ARCH_DMA_MINALIGN.
>>
>> (see arch/powerpc/include/asm/cache.h)
>>
>> This condition is properly tested for in fec_mxc.c.
>
> so fix this in common code instead of hacking around it in individual drivers.
> seems to me that PKTALIGN should be defined to ARCH_DMA_MINALIGN and ultimately
> removed.
> -mike
Hi Mike,
I'm not in a position to test against MAKEALL, but it appears that all
architectures have cache.h and define ARCH_DMA_MINALIGN, so it should
be trivially easy to fix PKTALIGN to be at least ARCH_DMA_MINALIGN as
shown below.
PKTSIZE_ALIGN seems safe for all architectures at 1536.
Note that this will reduce the value to 16 for some PPC devices, but I
haven't found any place that this would break things.
Is this what you're after?
Are you in a position to run MAKEALL or can you advise about the
requirements?
Please advise,
Eric
~/u-boot-imx6$ git diff
diff --git a/include/net.h b/include/net.h
index e4d42c2..ff428d0 100644
--- a/include/net.h
+++ b/include/net.h
@@ -16,6 +16,7 @@
#include <commproc.h>
#endif /* CONFIG_8xx */
+#include <asm/cache.h>
#include <asm/byteorder.h> /* for nton* / ntoh* stuff */
@@ -31,7 +32,7 @@
# define PKTBUFSRX 4
#endif
-#define PKTALIGN 32
+#define PKTALIGN ARCH_DMA_MINALIGN
/* IPv4 addresses are always 32 bits in size */
typedef u32 IPaddr_t;
next prev parent reply other threads:[~2012-03-14 19:12 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <http://lists.denx.de/pipermail/u-boot/2012-March/#119442>
2012-03-13 14:04 ` [U-Boot] [PATCH V3] net: fec_mxc: allow use with cache enabled Eric Nelson
2012-03-13 14:41 ` Mike Frysinger
2012-03-13 18:42 ` Eric Nelson
2012-03-13 20:14 ` Mike Frysinger
2012-03-14 1:43 ` Marek Vasut
2012-03-14 5:12 ` Eric Nelson
2012-03-14 5:41 ` Mike Frysinger
2012-03-14 19:12 ` Eric Nelson [this message]
2012-03-14 20:33 ` Mike Frysinger
2012-03-14 21:04 ` Eric Nelson
2012-03-14 21:15 ` Mike Frysinger
2012-03-14 5:45 ` Marek Vasut
2012-03-14 1:42 ` Marek Vasut
2012-03-13 15:48 ` Eric Nelson
2012-03-14 1:44 ` Marek Vasut
2012-03-14 1:46 ` Marek Vasut
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4F60ED8A.8090400@boundarydevices.com \
--to=eric.nelson@boundarydevices.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox