From mboxrd@z Thu Jan  1 00:00:00 1970
From: stefano babic <sbabic@denx.de>
Date: Sat, 17 Mar 2012 09:23:23 +0100
Subject: [U-Boot] [RFC] mx53loco: Add 1GHz support
In-Reply-To: <CAOMZO5A_-hm0hjX22URAXL4EkbCw=f+aXCWyzB+wLQKCT16Q=A@mail.gmail.com>
References: <1331929300-27616-1-git-send-email-festevam@gmail.com>
	<1331929300-27616-2-git-send-email-festevam@gmail.com>
	<CAOMZO5A_-hm0hjX22URAXL4EkbCw=f+aXCWyzB+wLQKCT16Q=A@mail.gmail.com>
Message-ID: <4F6449FB.3030107@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Am 16/03/2012 22:01, schrieb Fabio Estevam:
> On Fri, Mar 16, 2012 at 5:21 PM, Fabio Estevam <festevam@gmail.com> wrote:
> 
>> I would be glad to receive some suggestion in order to get the 1GHz frequency
>> printed during the initial boot log.
> 
> If I print the frequency inside board_late_init() then I see the
> correct reported CPU frequency:
> 
> U-Boot 2011.12-07170-g536d7cc-dirty (Mar 16 2012 - 17:53:26)
> 
> Board: MX53 LOCO
> I2C:   ready
> DRAM:  1 GiB
> WARNING: Caches not enabled
> MMC:   FSL_SDHC: 0, FSL_SDHC: 1
> In:    serial
> Out:   serial
> Err:   serial
> CPU:   Freescale i.MX53 family rev2.1 at 1000 MHz
> Reset cause: POR
> Net:   FEC
> Warning: failed to set MAC address
> 
> Hit any key to stop autoboot:  0
> MX53LOCO U-Boot >
> 
> And the patch now looks like:
> 

I do not see pmic_dialog.c and where the constants for dialog are
definded. Have I missed another patch ?

Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================