[U-Boot] [PATCH 1/2] mx6: Fix reset cause for Power On Reset case

[U-Boot] [PATCH 1/2] mx6: Fix reset cause for Power On Reset case

[Fabio Estevam]

After booting mx6qsabrelite from POR the following is reported:

CPU:   Freescale i.MX61 family rev1.0 at 792 MHz                                
Reset cause: unknown reset

This is because both the POR and WDOG bits are set after reset.

Fix this by also checking both bits in the POR case.  

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
 arch/arm/cpu/armv7/imx-common/cpu.c |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)

diff --git a/arch/arm/cpu/armv7/imx-common/cpu.c b/arch/arm/cpu/armv7/imx-common/cpu.c
index 1e30ae5..6d7486b 100644
--- a/arch/arm/cpu/armv7/imx-common/cpu.c
+++ b/arch/arm/cpu/armv7/imx-common/cpu.c
@@ -44,6 +44,7 @@ static char *get_reset_cause(void)
 
 	switch (cause) {
 	case 0x00001:
+	case 0x00011:
 		return "POR";
 	case 0x00004:
 		return "CSU";
-- 
1.7.1

[U-Boot] [PATCH 2/2] mx6: Remove duplicate definition of ANATOP_BASE_ADDR

[Fabio Estevam]

Remove duplicate definition of ANATOP_BASE_ADDR.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
 arch/arm/include/asm/arch-mx6/imx-regs.h |    1 -
 1 files changed, 0 insertions(+), 1 deletions(-)

diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h b/arch/arm/include/asm/arch-mx6/imx-regs.h
index 6a200bb..5ba5f39 100644
--- a/arch/arm/include/asm/arch-mx6/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx6/imx-regs.h
@@ -115,7 +115,6 @@
 #define USB_PHY0_BASE_ADDR          (AIPS1_OFF_BASE_ADDR + 0x49000)
 #define USB_PHY1_BASE_ADDR          (AIPS1_OFF_BASE_ADDR + 0x4a000)
 #define CCM_BASE_ADDR               (AIPS1_OFF_BASE_ADDR + 0x44000)
-#define ANATOP_BASE_ADDR            (AIPS1_OFF_BASE_ADDR + 0x48000)
 #define SNVS_BASE_ADDR              (AIPS1_OFF_BASE_ADDR + 0x4C000)
 #define EPIT1_BASE_ADDR             (AIPS1_OFF_BASE_ADDR + 0x50000)
 #define EPIT2_BASE_ADDR             (AIPS1_OFF_BASE_ADDR + 0x54000)
-- 
1.7.1

[U-Boot] [PATCH 2/2] mx6: Remove duplicate definition of ANATOP_BASE_ADDR

[Stefano Babic]

On 13/03/2012 18:26, Fabio Estevam wrote:
> Remove duplicate definition of ANATOP_BASE_ADDR.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
> ---

Applied to u-boot-imx, thanks.

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================

[U-Boot] [PATCH 1/2] mx6: Fix reset cause for Power On Reset case

[Stefano Babic]

On 13/03/2012 18:26, Fabio Estevam wrote:
> After booting mx6qsabrelite from POR the following is reported:
> 
> CPU:   Freescale i.MX61 family rev1.0 at 792 MHz                                
> Reset cause: unknown reset
> 
> This is because both the POR and WDOG bits are set after reset.
> 
> Fix this by also checking both bits in the POR case.  
> 
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>

Applied to u-boot-imx, thanks.

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================