From mboxrd@z Thu Jan 1 00:00:00 1970 From: Scott Wood Date: Wed, 21 Mar 2012 13:42:28 -0500 Subject: [U-Boot] [PATCH] NAND: TI: fix warnings in omap_gpmc.c In-Reply-To: <1332329622-9556-1-git-send-email-sbabic@denx.de> References: <1332329622-9556-1-git-send-email-sbabic@denx.de> Message-ID: <4F6A2114.3000508@freescale.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 03/21/2012 06:33 AM, Stefano Babic wrote: > The following warnings are reported for boards using SOFT ECC. > > omap_gpmc.c:33:30: warning: 'hw_nand_oob' defined but not used > omap_gpmc.c:78:13: warning: 'omap_hwecc_init' defined but not used > omap_gpmc.c:116:12: warning: 'omap_correct_data' defined but not used > omap_gpmc.c:182:12: warning: 'omap_calculate_ecc' defined but not used > omap_gpmc.c:208:13: warning: 'omap_enable_hwecc' defined but not used > > Signed-off-by: Stefano Babic > Cc: Tom Rini > Cc: Scott Wood > --- > drivers/mtd/nand/omap_gpmc.c | 6 ++++++ > 1 files changed, 6 insertions(+), 0 deletions(-) > > diff --git a/drivers/mtd/nand/omap_gpmc.c b/drivers/mtd/nand/omap_gpmc.c > index 1dfe074..3a9baff 100644 > --- a/drivers/mtd/nand/omap_gpmc.c > +++ b/drivers/mtd/nand/omap_gpmc.c > @@ -30,7 +30,10 @@ > #include > > static uint8_t cs; > +#if !defined(CONFIG_SPL_BUILD) || \ > + (defined(CONFIG_SPL_BUILD) && !defined(CONFIG_SPL_NAND_SOFTECC)) > static struct nand_ecclayout hw_nand_oob = GPMC_NAND_HW_ECC_LAYOUT; > +#endif > > /* > * omap_nand_hwcontrol - Set the address pointers corretly for the > @@ -69,6 +72,8 @@ int omap_spl_dev_ready(struct mtd_info *mtd) > } > #endif > > +#if !defined(CONFIG_SPL_BUILD) || \ > + (defined(CONFIG_SPL_BUILD) && !defined(CONFIG_SPL_NAND_SOFTECC)) > /* > * omap_hwecc_init - Initialize the Hardware ECC for NAND flash in > * GPMC controller > @@ -231,6 +236,7 @@ static void omap_enable_hwecc(struct mtd_info *mtd, int32_t mode) > break; > } > } > +#endif > > #ifndef CONFIG_SPL_BUILD > /* Maybe just use __attribute__((unused))? Or provide this ifdeffery once at the top of the file, to produce a single symbol that indicates whether you're using hwecc in this file. -Scott