From mboxrd@z Thu Jan  1 00:00:00 1970
From: Scott Wood <scottwood@freescale.com>
Date: Thu, 22 Mar 2012 14:53:30 -0500
Subject: [U-Boot] [PATCH 3/4][v2] powerpc/85xx:Make debug exception
 vector accessible
In-Reply-To: <4F6B82B8.8070103@freescale.com>
References: <1332304982-10835-1-git-send-email-prabhakar@freescale.com>
	<4F6A3170.30907@freescale.com> <4F6ABE2E.5000502@freescale.com>
	<4F6B80F5.6070700@freescale.com> <4F6B82B8.8070103@freescale.com>
Message-ID: <4F6B833A.60704@freescale.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On 03/22/2012 02:51 PM, Timur Tabi wrote:
> Scott Wood wrote:
>>>> For your kind information : in start.S, label label
>>>> "create_ccsr_new_tlb", "create_ccsr_old_tlb" uses  MAS7  without
>>>> CONFIG_ENABLE_36BIT_PHYS  #define.
>>>> It should be fixed ??
> 
>> Yes, it should be fixed.  That was a fairly recent change and perhaps
>> e500v1 has not been tested since then -- Timur, could you look at this?
> 
> On e500v1 parts, CONFIG_SYS_CCSRBAR_PHYS_HIGH will always be 0, so it will
> only write 0 to MAS7.  Is that still considered a bad thing?  The tlbwe
> will ignore MAS7.

Either it's needed, or we should get rid of CONFIG_ENABLE_36BIT_PHYS
entirely.  Either way, we should test the results on e500v1 hardware.

-Scott