From mboxrd@z Thu Jan  1 00:00:00 1970
From: Stefano Babic <sbabic@denx.de>
Date: Mon, 26 Mar 2012 10:35:54 +0200
Subject: [U-Boot] [PATCH 2/2] i.MX6: mx6q_sabrelite: add SATA bindings
In-Reply-To: <1332716409-29225-3-git-send-email-eric.nelson@boundarydevices.com>
References: <http://lists.denx.de/pipermail/u-boot/2012-March/120899.html>
	<1332716409-29225-1-git-send-email-eric.nelson@boundarydevices.com>
	<1332716409-29225-3-git-send-email-eric.nelson@boundarydevices.com>
Message-ID: <4F702A6A.3000406@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On 26/03/2012 01:00, Eric Nelson wrote:
> V2 has been stripped of the board-independent changes and
> uses clrsetbits_le32() instead of twiddling bits by hand.
> 
> Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
> ---

Hi Eric,

>  board/freescale/mx6qsabrelite/mx6qsabrelite.c |   32 +++++++++++++++++++++++++
>  include/configs/mx6qsabrelite.h               |   13 ++++++++++
>  2 files changed, 45 insertions(+), 0 deletions(-)
> 
> diff --git a/board/freescale/mx6qsabrelite/mx6qsabrelite.c b/board/freescale/mx6qsabrelite/mx6qsabrelite.c
> index 1d09a72..afb1245 100644
> --- a/board/freescale/mx6qsabrelite/mx6qsabrelite.c
> +++ b/board/freescale/mx6qsabrelite/mx6qsabrelite.c
> @@ -25,6 +25,8 @@
>  #include <asm/arch/imx-regs.h>
>  #include <asm/arch/mx6x_pins.h>
>  #include <asm/arch/iomux-v3.h>
> +#include <asm/arch/ccm_regs.h>
> +#include <asm/arch/clock.h>
>  #include <asm/errno.h>
>  #include <asm/gpio.h>
>  #include <mmc.h>
> @@ -267,6 +269,32 @@ int board_eth_init(bd_t *bis)
>  	return 0;
>  }
>  
> +#ifdef CONFIG_CMD_SATA
> +
> +int setup_sata(void)
> +{
> +	int rval = enable_sata_clock();

What about to return at this point if there is an error ?

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================