From: Amit Virdi <amit.virdi@st.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 08/25] SPEAr: Add configuration options for spear3xx and spear6xx boards
Date: Tue, 27 Mar 2012 11:29:53 +0530 [thread overview]
Message-ID: <4F715759.9070305@st.com> (raw)
In-Reply-To: <201203261430.48891.sr@denx.de>
Stefan,
>>>
>>> Can't you just remove this config.mk file completely?
>>> CONFIG_SYS_TEXT_BASE can be moved to the config header instead. What
>>> else is this file needed for?
>>
>> Could you please explain which config header you are referring to here?
>> Do you mean include/configs/spear..... ?
>
> Yes.
>
>> For SPEAr310 and SPEAr320, config.mk is needed to make image (by
>> specifying FLASH=PNOR during compile time) that can access CFI compliant
>> PNOR flash.
>
> In the example above (spear300), only CONFIG_SYS_TEXT_BASE is left in
> config.mk. This can be moved to the config header (include/configs/spear-xxx-
> h).
>
> You should be able to move the other remaining options (PNOR...) to
> boards.cfg. Or is this not possible?
>
It is possible and it adds to the clarity, thanks for this nice
suggestion. I'll remove all the config.mk files from the
board/spear/spearxx/ directories and add targets in boards.cfg for
making u-boot build with environment variables placed in PNOR flash.
Best Regards
Amit Virdi
next prev parent reply other threads:[~2012-03-27 5:59 UTC|newest]
Thread overview: 79+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-03-07 12:03 [U-Boot] [PATCH 00/25] SPEAr: Update platform support for SPEAr3xx/6xx Amit Virdi
2012-03-07 12:03 ` [U-Boot] [PATCH 01/25] SPEAr: Fix ARM relocation support Amit Virdi
2012-03-07 13:11 ` Stefan Roese
2012-03-07 12:03 ` [U-Boot] [PATCH 02/25] SPEAr: Eliminate dependency on Xloader table Amit Virdi
2012-03-07 13:16 ` Stefan Roese
2012-03-07 12:03 ` [U-Boot] [PATCH 03/25] SPEAr: Place ethaddr write and read within CONFIG_CMD_NET Amit Virdi
2012-03-07 13:21 ` Stefan Roese
2012-03-07 13:29 ` Mike Frysinger
2012-03-26 11:23 ` Amit Virdi
2012-03-26 13:15 ` Wolfgang Denk
2012-03-07 12:03 ` [U-Boot] [PATCH 04/25] SPEAr: Configure network support for spear SoCs Amit Virdi
2012-03-07 13:29 ` Stefan Roese
2012-03-26 11:41 ` Amit Virdi
2012-03-26 11:51 ` Stefan Roese
2012-03-07 12:03 ` [U-Boot] [PATCH 05/25] SPEAr: Add macb driver support for spear310 and spear320 Amit Virdi
2012-03-07 12:03 ` [U-Boot] [PATCH 06/25] SPEAr: Add interface information in initialization Amit Virdi
2012-03-07 12:03 ` [U-Boot] [PATCH 07/25] SPEAr: Add basic arch related support for SPEAr SoCs Amit Virdi
2012-03-07 13:49 ` Stefan Roese
2012-03-12 12:30 ` Amit Virdi
2012-03-07 12:03 ` [U-Boot] [PATCH 08/25] SPEAr: Add configuration options for spear3xx and spear6xx boards Amit Virdi
2012-03-07 13:54 ` Stefan Roese
2012-03-26 12:10 ` Amit Virdi
2012-03-26 12:30 ` Stefan Roese
2012-03-27 5:59 ` Amit Virdi [this message]
2012-03-07 12:03 ` [U-Boot] [PATCH 09/25] SPEAr: Remove unused flag (CONFIG_SYS_HZ_CLOCK) Amit Virdi
2012-03-07 13:56 ` Stefan Roese
2012-03-07 12:03 ` [U-Boot] [PATCH 10/25] SPEAr: Change the default environment variables Amit Virdi
2012-03-07 14:03 ` Stefan Roese
2012-03-12 12:38 ` Amit Virdi
2012-03-07 12:04 ` [U-Boot] [PATCH 11/25] SPEAr: Initialize SNOR in early_board_init_f Amit Virdi
2012-03-07 14:06 ` Stefan Roese
2012-03-07 12:04 ` [U-Boot] [PATCH 12/25] SPEAr: Enable usb device high speed support Amit Virdi
2012-03-07 14:07 ` Stefan Roese
2012-03-12 12:39 ` Amit Virdi
2012-03-26 12:15 ` Amit Virdi
2012-03-07 12:04 ` [U-Boot] [PATCH 13/25] SPEAr: spear usbtty configuration does not use ethernet device Amit Virdi
2012-03-07 14:14 ` Stefan Roese
2012-03-12 13:12 ` Amit Virdi
2012-03-07 12:04 ` [U-Boot] [PATCH 14/25] SPEAr: Enable udc and usb-console support only for usbtty configuration Amit Virdi
2012-03-07 14:15 ` Stefan Roese
2012-03-07 12:04 ` [U-Boot] [PATCH 15/25] SPEAr: Enable autoneg for ethernet Amit Virdi
2012-03-07 14:18 ` Stefan Roese
2012-03-27 9:02 ` Amit Virdi
2012-03-27 9:20 ` Stefan Roese
2012-03-27 9:24 ` Amit Virdi
2012-03-07 12:04 ` [U-Boot] [PATCH 16/25] SPEAr: Enable dcache for fast file transfer Amit Virdi
2012-03-07 12:04 ` [U-Boot] [PATCH 17/25] SPEAr: Enable CONFIG_SYS_FLASH_PROTECTION Amit Virdi
2012-03-07 14:25 ` Stefan Roese
2012-03-27 6:39 ` Amit Virdi
2012-03-07 12:04 ` [U-Boot] [PATCH 18/25] SPEAr: Correct the definition of CONFIG_SYS_MONITOR_BASE Amit Virdi
2012-03-07 14:31 ` Stefan Roese
2012-03-27 6:38 ` Amit Virdi
2012-03-27 7:05 ` Stefan Roese
2012-03-27 7:42 ` Amit Virdi
2012-03-07 12:04 ` [U-Boot] [PATCH 19/25] SPEAr: Enable CONFIG_SYS_FLASH_EMPTY_INFO macro Amit Virdi
2012-03-07 14:32 ` Stefan Roese
2012-03-27 6:11 ` Amit Virdi
2012-03-07 12:04 ` [U-Boot] [PATCH 20/25] SPEAr: Enable ONFI nand flash detection for spear3xx and 6xx and evb Amit Virdi
2012-03-07 14:34 ` Stefan Roese
2012-03-27 6:09 ` Amit Virdi
2012-03-07 12:04 ` [U-Boot] [PATCH 21/25] SPEAr: explicitly select clk src for UART Amit Virdi
2012-03-07 14:36 ` Stefan Roese
2012-03-07 12:04 ` [U-Boot] [PATCH 22/25] SPEAr: Correct SoC ID offset in misc configuration space Amit Virdi
2012-03-07 14:36 ` Stefan Roese
2012-03-07 12:04 ` [U-Boot] [PATCH 23/25] SPEAr: Use separate config flags for 3xx and 6xx board files Amit Virdi
2012-03-07 14:38 ` Stefan Roese
2012-03-12 13:57 ` Amit Virdi
2012-03-12 14:17 ` Stefan Roese
2012-03-07 12:04 ` [U-Boot] [PATCH 24/25] cleanup/SPEAr: Remove unnecessary parenthesis Amit Virdi
2012-03-07 14:41 ` Stefan Roese
2012-03-07 14:46 ` Stefan Roese
2012-03-12 13:52 ` Amit Virdi
2012-03-07 12:04 ` [U-Boot] [PATCH 25/25] cleanup/SPEAr: Define configuration flags more elegantly Amit Virdi
2012-03-07 14:42 ` Stefan Roese
2012-03-07 13:15 ` [U-Boot] [PATCH 00/25] SPEAr: Update platform support for SPEAr3xx/6xx Stefan Roese
2012-03-07 13:56 ` Amit Virdi
2012-03-09 7:29 ` Vipin Kumar
2012-03-09 7:47 ` Stefan Roese
2012-03-09 8:47 ` Vipin Kumar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4F715759.9070305@st.com \
--to=amit.virdi@st.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox