From mboxrd@z Thu Jan 1 00:00:00 1970 From: Michal Simek Date: Tue, 27 Mar 2012 13:59:30 +0200 Subject: [U-Boot] [PATCH] microblaze: Enable phylib and mii support In-Reply-To: <1330104821-8014-1-git-send-email-linz@li-pro.net> References: <1330104821-8014-1-git-send-email-linz@li-pro.net> Message-ID: <4F71ABA2.1050007@monstr.eu> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Stephan Linz wrote: > Enable phylib and mii support for AXI EMAC > ethernet drivers on Microblaze systems. > > Signed-off-by: Stephan Linz > Reported-by: Michal Simek > --- > include/configs/microblaze-generic.h | 21 +++++++++++++++++++++ > 1 files changed, 21 insertions(+), 0 deletions(-) > > diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h > index 03a6f5a..b76bbcf 100644 > --- a/include/configs/microblaze-generic.h > +++ b/include/configs/microblaze-generic.h > @@ -338,4 +338,25 @@ > #define CONFIG_FIT 1 > #define CONFIG_OF_LIBFDT 1 > > +#if defined(CONFIG_XILINX_AXIEMAC) > +# define CONFIG_MII 1 > +# define CONFIG_CMD_MII 1 > +# define CONFIG_PHY_GIGE 1 > +# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN 1 > +# define CONFIG_PHYLIB 1 > +# define CONFIG_PHY_ATHEROS 1 > +# define CONFIG_PHY_BROADCOM 1 > +# define CONFIG_PHY_DAVICOM 1 > +# define CONFIG_PHY_LXT 1 > +# define CONFIG_PHY_MARVELL 1 > +# define CONFIG_PHY_MICREL 1 > +# define CONFIG_PHY_NATSEMI 1 > +# define CONFIG_PHY_REALTEK 1 > +# define CONFIG_PHY_VITESSE 1 > +#else > +# undef CONFIG_MII > +# undef CONFIG_CMD_MII > +# undef CONFIG_PHYLIB > +#endif > + > #endif /* __CONFIG_H */ Applied to microblaze custodian repo. Thanks, Michal -- Michal Simek, Ing. (M.Eng) w: www.monstr.eu p: +42-0-721842854 Maintainer of Linux kernel 2.6 Microblaze Linux - http://www.monstr.eu/fdt/ Microblaze U-BOOT custodian