* [U-Boot] [GIT PULL] Pull request: u-boot-imx
@ 2012-03-08 7:52 Stefano Babic
2012-03-26 20:45 ` Albert ARIBAUD
0 siblings, 1 reply; 6+ messages in thread
From: Stefano Babic @ 2012-03-08 7:52 UTC (permalink / raw)
To: u-boot
Hi Albert,
please pull from u-boot-imx, thanks.
The following changes since commit 32ec258f829808dd7cf74fd83ba999fdaaeab715:
IXP: Fix GPIO_INT_ACT_LOW_SET() (2012-03-08 08:11:45 +0100)
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git master
Dirk Behme (1):
imximage: Remove overwriting of flash_offset
Eric Nelson (2):
i.MX6: mx6qsabrelite: add ext2 support
mx6q: mx6qsabrelite: setup_spi() should be called in board_init to
allow use for environment
Fabio Estevam (5):
mx51evk: Fix CONFIG_SYS_MEMTEST_END
mx53evk: Fix CONFIG_SYS_MEMTEST_END
mx53smd: Fix CONFIG_SYS_MEMTEST_END
efikamx: Fix CONFIG_SYS_MEMTEST_END
mx31pdk: Fix CONFIG_SYS_MEMTEST_END
Helmut Raiger (1):
mx31: add "ARM11P power gating" to get_reset_cause
arch/arm/cpu/arm1136/mx31/generic.c | 2 ++
board/freescale/mx6qsabrelite/mx6qsabrelite.c | 8 ++++----
include/configs/efikamx.h | 2 +-
include/configs/mx31pdk.h | 2 +-
include/configs/mx51evk.h | 2 +-
include/configs/mx53evk.h | 2 +-
include/configs/mx53smd.h | 2 +-
include/configs/mx6qsabrelite.h | 1 +
tools/imximage.c | 18 ++++++++++++++----
tools/imximage.h | 1 +
10 files changed, 27 insertions(+), 13 deletions(-)
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
2012-03-08 7:52 [U-Boot] [GIT PULL] Pull request: u-boot-imx Stefano Babic
@ 2012-03-26 20:45 ` Albert ARIBAUD
2012-03-26 21:08 ` Albert ARIBAUD
0 siblings, 1 reply; 6+ messages in thread
From: Albert ARIBAUD @ 2012-03-26 20:45 UTC (permalink / raw)
To: u-boot
Hi Stefano,
Le 08/03/2012 08:52, Stefano Babic a ?crit :
> Hi Albert,
>
> please pull from u-boot-imx, thanks.
>
> The following changes since commit 32ec258f829808dd7cf74fd83ba999fdaaeab715:
>
> IXP: Fix GPIO_INT_ACT_LOW_SET() (2012-03-08 08:11:45 +0100)
>
> are available in the git repository at:
> git://www.denx.de/git/u-boot-imx.git master
>
> Dirk Behme (1):
> imximage: Remove overwriting of flash_offset
>
> Eric Nelson (2):
> i.MX6: mx6qsabrelite: add ext2 support
> mx6q: mx6qsabrelite: setup_spi() should be called in board_init to
> allow use for environment
>
> Fabio Estevam (5):
> mx51evk: Fix CONFIG_SYS_MEMTEST_END
> mx53evk: Fix CONFIG_SYS_MEMTEST_END
> mx53smd: Fix CONFIG_SYS_MEMTEST_END
> efikamx: Fix CONFIG_SYS_MEMTEST_END
> mx31pdk: Fix CONFIG_SYS_MEMTEST_END
>
> Helmut Raiger (1):
> mx31: add "ARM11P power gating" to get_reset_cause
>
> arch/arm/cpu/arm1136/mx31/generic.c | 2 ++
> board/freescale/mx6qsabrelite/mx6qsabrelite.c | 8 ++++----
> include/configs/efikamx.h | 2 +-
> include/configs/mx31pdk.h | 2 +-
> include/configs/mx51evk.h | 2 +-
> include/configs/mx53evk.h | 2 +-
> include/configs/mx53smd.h | 2 +-
> include/configs/mx6qsabrelite.h | 1 +
> tools/imximage.c | 18 ++++++++++++++----
> tools/imximage.h | 1 +
> 10 files changed, 27 insertions(+), 13 deletions(-)
Applied to u-boot-arm/master, thanks.
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
2012-03-26 20:45 ` Albert ARIBAUD
@ 2012-03-26 21:08 ` Albert ARIBAUD
2012-03-27 7:39 ` Stefano Babic
2012-03-27 7:46 ` [U-Boot] [GIT PULL] Update - " Stefano Babic
0 siblings, 2 replies; 6+ messages in thread
From: Albert ARIBAUD @ 2012-03-26 21:08 UTC (permalink / raw)
To: u-boot
Le 26/03/2012 22:45, Albert ARIBAUD a ?crit :
> Hi Stefano,
>
> Le 08/03/2012 08:52, Stefano Babic a ?crit :
>> Hi Albert,
>>
>> please pull from u-boot-imx, thanks.
>>
>> The following changes since commit
>> 32ec258f829808dd7cf74fd83ba999fdaaeab715:
>>
>> IXP: Fix GPIO_INT_ACT_LOW_SET() (2012-03-08 08:11:45 +0100)
>>
>> are available in the git repository at:
>> git://www.denx.de/git/u-boot-imx.git master
>>
>> Dirk Behme (1):
>> imximage: Remove overwriting of flash_offset
>>
>> Eric Nelson (2):
>> i.MX6: mx6qsabrelite: add ext2 support
>> mx6q: mx6qsabrelite: setup_spi() should be called in board_init to
>> allow use for environment
>>
>> Fabio Estevam (5):
>> mx51evk: Fix CONFIG_SYS_MEMTEST_END
>> mx53evk: Fix CONFIG_SYS_MEMTEST_END
>> mx53smd: Fix CONFIG_SYS_MEMTEST_END
>> efikamx: Fix CONFIG_SYS_MEMTEST_END
>> mx31pdk: Fix CONFIG_SYS_MEMTEST_END
>>
>> Helmut Raiger (1):
>> mx31: add "ARM11P power gating" to get_reset_cause
>>
>> arch/arm/cpu/arm1136/mx31/generic.c | 2 ++
>> board/freescale/mx6qsabrelite/mx6qsabrelite.c | 8 ++++----
>> include/configs/efikamx.h | 2 +-
>> include/configs/mx31pdk.h | 2 +-
>> include/configs/mx51evk.h | 2 +-
>> include/configs/mx53evk.h | 2 +-
>> include/configs/mx53smd.h | 2 +-
>> include/configs/mx6qsabrelite.h | 1 +
>> tools/imximage.c | 18 ++++++++++++++----
>> tools/imximage.h | 1 +
>> 10 files changed, 27 insertions(+), 13 deletions(-)
>
> Applied to u-boot-arm/master, thanks.
>
> Amicalement,
Correction: I seem to have misapplied this and the TI tree, so I rolled
back my changes...
The imx master branch has moved and no longer starts with the commits
above from the base above. Stefano, can you rebase on u-boot-arm and
re-issue an up-to-date request?
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
2012-03-26 21:08 ` Albert ARIBAUD
@ 2012-03-27 7:39 ` Stefano Babic
2012-03-27 7:46 ` [U-Boot] [GIT PULL] Update - " Stefano Babic
1 sibling, 0 replies; 6+ messages in thread
From: Stefano Babic @ 2012-03-27 7:39 UTC (permalink / raw)
To: u-boot
On 26/03/2012 23:08, Albert ARIBAUD wrote:
> Le 26/03/2012 22:45, Albert ARIBAUD a ?crit :
>> Hi Stefano,
>>
>> Le 08/03/2012 08:52, Stefano Babic a ?crit :
>>> Hi Albert,
>>>
>>> please pull from u-boot-imx, thanks.
>>>
>>> The following changes since commit
>>> 32ec258f829808dd7cf74fd83ba999fdaaeab715:
>>>
>>> IXP: Fix GPIO_INT_ACT_LOW_SET() (2012-03-08 08:11:45 +0100)
>>>
>>> are available in the git repository at:
>>> git://www.denx.de/git/u-boot-imx.git master
>>>
>>> Dirk Behme (1):
>>> imximage: Remove overwriting of flash_offset
>>>
>>> Eric Nelson (2):
>>> i.MX6: mx6qsabrelite: add ext2 support
>>> mx6q: mx6qsabrelite: setup_spi() should be called in board_init to
>>> allow use for environment
>>>
>>> Fabio Estevam (5):
>>> mx51evk: Fix CONFIG_SYS_MEMTEST_END
>>> mx53evk: Fix CONFIG_SYS_MEMTEST_END
>>> mx53smd: Fix CONFIG_SYS_MEMTEST_END
>>> efikamx: Fix CONFIG_SYS_MEMTEST_END
>>> mx31pdk: Fix CONFIG_SYS_MEMTEST_END
>>>
>>> Helmut Raiger (1):
>>> mx31: add "ARM11P power gating" to get_reset_cause
>>>
>>> arch/arm/cpu/arm1136/mx31/generic.c | 2 ++
>>> board/freescale/mx6qsabrelite/mx6qsabrelite.c | 8 ++++----
>>> include/configs/efikamx.h | 2 +-
>>> include/configs/mx31pdk.h | 2 +-
>>> include/configs/mx51evk.h | 2 +-
>>> include/configs/mx53evk.h | 2 +-
>>> include/configs/mx53smd.h | 2 +-
>>> include/configs/mx6qsabrelite.h | 1 +
>>> tools/imximage.c | 18 ++++++++++++++----
>>> tools/imximage.h | 1 +
>>> 10 files changed, 27 insertions(+), 13 deletions(-)
>>
>> Applied to u-boot-arm/master, thanks.
>>
>> Amicalement,
>
> Correction: I seem to have misapplied this and the TI tree, so I rolled
> back my changes...
>
> The imx master branch has moved and no longer starts with the commits
> above from the base above. Stefano, can you rebase on u-boot-arm and
> re-issue an up-to-date request?
Yes, you're right- I had to rebase on u-boot.git because I needed some
fixes. I will resend my pull request.
Stefano
>
> Amicalement,
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot] [GIT PULL] Update - Pull request: u-boot-imx
2012-03-26 21:08 ` Albert ARIBAUD
2012-03-27 7:39 ` Stefano Babic
@ 2012-03-27 7:46 ` Stefano Babic
2012-03-27 20:07 ` Albert ARIBAUD
1 sibling, 1 reply; 6+ messages in thread
From: Stefano Babic @ 2012-03-27 7:46 UTC (permalink / raw)
To: u-boot
Hi Albert,
please pull from u-boot-imx (rebased on current u-boot-arm).
The following changes since commit cd207cde948ecf9ff50a0fa1ae2650f65579c9c9:
IXP: Fix GPIO_INT_ACT_LOW_SET() (2012-03-26 23:09:26 +0200)
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git master
Dirk Behme (1):
imximage: Remove overwriting of flash_offset
Eric Nelson (4):
i.MX6: mx6qsabrelite: add ext2 support
mx6q: mx6qsabrelite: setup_spi() should be called in board_init to
allow use for environment
i.MX6: mx6q_sabrelite: add CONFIG_REVISION_TAG
i.MX6: mx6qsabrelite: add MACH_TYPE_MX6Q_SABRELITE
Fabio Estevam (15):
mx51evk: Fix CONFIG_SYS_MEMTEST_END
mx53evk: Fix CONFIG_SYS_MEMTEST_END
mx53smd: Fix CONFIG_SYS_MEMTEST_END
efikamx: Fix CONFIG_SYS_MEMTEST_END
mx31pdk: Fix CONFIG_SYS_MEMTEST_END
mx6: Fix reset cause for Power On Reset case
mx6: Remove duplicate definition of ANATOP_BASE_ADDR
pmic_i2c: Return error in case of invalid pmic_i2c_tx_num
mxs_spi: Return proper timeout error
mx6: Read silicon revision from register
USB: ehci-mx6: Add proper IO accessors
mx28evk: Provide default values for SPI bus and chip select
configs: imx: Use CONFIG_SF_DEFAULT_CS
mx53: Make PLL2 to be the parent of UART clock
mx53ard: Initialize return code with error
Helmut Raiger (1):
mx31: add "ARM11P power gating" to get_reset_cause
Marek Vasut (3):
i.MX28: Enable additional DRAM address bits
i.MX28: Make the stabilization delays shorter
i.MX28: Drop __naked function from spl_mem_init
arch/arm/cpu/arm1136/mx31/generic.c | 2 +
arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c | 12 +--
arch/arm/cpu/arm926ejs/mx28/spl_power_init.c | 8 +-
arch/arm/cpu/armv7/imx-common/cpu.c | 25 ++++-
arch/arm/cpu/armv7/mx5/lowlevel_init.S | 20 +++-
arch/arm/cpu/armv7/mx6/soc.c | 8 ++-
arch/arm/include/asm/arch-mx6/imx-regs.h | 143
++++++++++++++++++++++++-
board/freescale/mx53ard/mx53ard.c | 2 +-
board/freescale/mx6qsabrelite/mx6qsabrelite.c | 13 ++-
drivers/misc/pmic_i2c.c | 6 +
drivers/spi/mxs_spi.c | 6 +-
drivers/usb/host/ehci-mx6.c | 13 +--
include/configs/efikamx.h | 4 +-
include/configs/m28evk.h | 2 +-
include/configs/mx28evk.h | 2 +
include/configs/mx31pdk.h | 2 +-
include/configs/mx51evk.h | 2 +-
include/configs/mx53evk.h | 2 +-
include/configs/mx53smd.h | 2 +-
include/configs/mx6qsabrelite.h | 4 +
include/configs/vision2.h | 2 +-
tools/imximage.c | 18 +++-
tools/imximage.h | 1 +
23 files changed, 251 insertions(+), 48 deletions(-)
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot] [GIT PULL] Update - Pull request: u-boot-imx
2012-03-27 7:46 ` [U-Boot] [GIT PULL] Update - " Stefano Babic
@ 2012-03-27 20:07 ` Albert ARIBAUD
0 siblings, 0 replies; 6+ messages in thread
From: Albert ARIBAUD @ 2012-03-27 20:07 UTC (permalink / raw)
To: u-boot
Hi Stefano,
Le 27/03/2012 09:46, Stefano Babic a ?crit :
> Hi Albert,
>
> please pull from u-boot-imx (rebased on current u-boot-arm).
>
> The following changes since commit cd207cde948ecf9ff50a0fa1ae2650f65579c9c9:
>
> IXP: Fix GPIO_INT_ACT_LOW_SET() (2012-03-26 23:09:26 +0200)
>
> are available in the git repository at:
> git://www.denx.de/git/u-boot-imx.git master
>
> Dirk Behme (1):
> imximage: Remove overwriting of flash_offset
>
> Eric Nelson (4):
> i.MX6: mx6qsabrelite: add ext2 support
> mx6q: mx6qsabrelite: setup_spi() should be called in board_init to
> allow use for environment
> i.MX6: mx6q_sabrelite: add CONFIG_REVISION_TAG
> i.MX6: mx6qsabrelite: add MACH_TYPE_MX6Q_SABRELITE
>
> Fabio Estevam (15):
> mx51evk: Fix CONFIG_SYS_MEMTEST_END
> mx53evk: Fix CONFIG_SYS_MEMTEST_END
> mx53smd: Fix CONFIG_SYS_MEMTEST_END
> efikamx: Fix CONFIG_SYS_MEMTEST_END
> mx31pdk: Fix CONFIG_SYS_MEMTEST_END
> mx6: Fix reset cause for Power On Reset case
> mx6: Remove duplicate definition of ANATOP_BASE_ADDR
> pmic_i2c: Return error in case of invalid pmic_i2c_tx_num
> mxs_spi: Return proper timeout error
> mx6: Read silicon revision from register
> USB: ehci-mx6: Add proper IO accessors
> mx28evk: Provide default values for SPI bus and chip select
> configs: imx: Use CONFIG_SF_DEFAULT_CS
> mx53: Make PLL2 to be the parent of UART clock
> mx53ard: Initialize return code with error
>
> Helmut Raiger (1):
> mx31: add "ARM11P power gating" to get_reset_cause
>
> Marek Vasut (3):
> i.MX28: Enable additional DRAM address bits
> i.MX28: Make the stabilization delays shorter
> i.MX28: Drop __naked function from spl_mem_init
>
> arch/arm/cpu/arm1136/mx31/generic.c | 2 +
> arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c | 12 +--
> arch/arm/cpu/arm926ejs/mx28/spl_power_init.c | 8 +-
> arch/arm/cpu/armv7/imx-common/cpu.c | 25 ++++-
> arch/arm/cpu/armv7/mx5/lowlevel_init.S | 20 +++-
> arch/arm/cpu/armv7/mx6/soc.c | 8 ++-
> arch/arm/include/asm/arch-mx6/imx-regs.h | 143
> ++++++++++++++++++++++++-
> board/freescale/mx53ard/mx53ard.c | 2 +-
> board/freescale/mx6qsabrelite/mx6qsabrelite.c | 13 ++-
> drivers/misc/pmic_i2c.c | 6 +
> drivers/spi/mxs_spi.c | 6 +-
> drivers/usb/host/ehci-mx6.c | 13 +--
> include/configs/efikamx.h | 4 +-
> include/configs/m28evk.h | 2 +-
> include/configs/mx28evk.h | 2 +
> include/configs/mx31pdk.h | 2 +-
> include/configs/mx51evk.h | 2 +-
> include/configs/mx53evk.h | 2 +-
> include/configs/mx53smd.h | 2 +-
> include/configs/mx6qsabrelite.h | 4 +
> include/configs/vision2.h | 2 +-
> tools/imximage.c | 18 +++-
> tools/imximage.h | 1 +
> 23 files changed, 251 insertions(+), 48 deletions(-)
Applied to u-boot-arm/master, thanks.
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2012-03-27 20:07 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-03-08 7:52 [U-Boot] [GIT PULL] Pull request: u-boot-imx Stefano Babic
2012-03-26 20:45 ` Albert ARIBAUD
2012-03-26 21:08 ` Albert ARIBAUD
2012-03-27 7:39 ` Stefano Babic
2012-03-27 7:46 ` [U-Boot] [GIT PULL] Update - " Stefano Babic
2012-03-27 20:07 ` Albert ARIBAUD
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox