From: Albert ARIBAUD <albert.u.boot@aribaud.net>
To: u-boot@lists.denx.de
Subject: [U-Boot] pull request for u-boot-tegra/master
Date: Thu, 29 Mar 2012 08:13:44 +0200 [thread overview]
Message-ID: <4F73FD98.1050004@aribaud.net> (raw)
In-Reply-To: <5FBF8E85CA34454794F0F7ECBA79798F37977BF683@HQMAIL04.nvidia.com>
Hi Tom,
Le 28/03/2012 23:48, Tom Warren a ?crit :
> Albert,
>
> Please pull u-boot-tegra/master into arm master. Thanks!
>
> The following changes since commit 4a3ea216414ad762b3718775a65437c13f0accbc:
>
> ARM: highbank: setup env from boot source register (2012-03-28 23:34:27 +0200)
>
> are available in the git repository at:
> git://git.denx.de/u-boot-tegra master
>
> Simon Glass (32):
> fdt: Add fdtdec_find_aliases() to deal with alias nodes
> fdt: Add tests for fdtdec
> fdt: Tidy up a few fdtdec problems
> fdt: Add functions to access phandles, arrays and bools
> fdt: Add basic support for decoding GPIO definitions
> arm: fdt: Add skeleton device tree file from kernel
> tegra: fdt: Add Tegra2x device tree file from kernel
> tegra: fdt: Add device tree file for Tegra2 Seaboard from kernel
> fdt: Add staging area for device tree binding documentation
> fdt: Add tegra-usb bindings file from linux
> tegra: fdt: Add additional USB binding
> tegra: fdt: Add clock bindings
> tegra: fdt: Add clock bindings for Tegra2 Seaboard
> tegra: usb: fdt: Add additional device tree definitions for USB ports
> tegra: usb: fdt: Add USB definitions for Tegra2 Seaboard
> usb: Add support for txfifo threshold
> tegra: fdt: Add function to return peripheral/clock ID
> tegra: usb: Add support for Tegra USB peripheral
> fdt: Avoid early panic() when there is no FDT present
> arm: Check for valid FDT after console is up
> tegra: usb: Add USB support to nvidia boards
> tegra: usb: Add common USB defines for tegra2 boards
> tegra: usb: Enable USB on Seaboard
> tegra: fdt: Enable FDT support for Seaboard
> tegra: Rename NV_PA_PMC_BASE to TEGRA2_PMC_BASE
> fdt: Add function to allow aliases to refer to multiple nodes
> tegra: Enhance clock support to handle 16-bit clock divisors
> tegra: i2c: Initialise I2C on Nvidia boards
> tegra: i2c: Select number of controllers for Tegra2 boards
> tegra: i2c: Enable I2C on Seaboard
> tegra: i2c: Select I2C ordering for Seaboard
> tegra: fdt: i2c: Add extra I2C bindings for U-Boot
>
> Tom Warren (2):
> arm: Tegra2: Fix ELDK42 gcc failure with inline asm stack pointer load
> tegra: fdt: Enable FDT support for Ventana
>
> Yen Lin (1):
> tegra: i2c: Add I2C driver
>
> README | 3 +
> arch/arm/cpu/armv7/tegra2/Makefile | 4 +-
> arch/arm/cpu/armv7/tegra2/ap20.c | 20 +-
> arch/arm/cpu/armv7/tegra2/board.c | 2 +-
> arch/arm/cpu/armv7/tegra2/clock.c | 121 ++++-
> arch/arm/cpu/armv7/tegra2/config.mk | 2 +
> arch/arm/cpu/armv7/tegra2/usb.c | 460 ++++++++++++++++
> arch/arm/dts/skeleton.dtsi | 13 +
> arch/arm/dts/tegra20.dtsi | 196 +++++++
> arch/arm/include/asm/arch-tegra2/clk_rst.h | 10 +-
> arch/arm/include/asm/arch-tegra2/clock.h | 13 +
> arch/arm/include/asm/arch-tegra2/tegra2.h | 6 +-
> arch/arm/include/asm/arch-tegra2/tegra_i2c.h | 157 ++++++
> arch/arm/include/asm/arch-tegra2/usb.h | 252 +++++++++
> arch/arm/lib/board.c | 8 +
> board/nvidia/common/board.c | 19 +
> board/nvidia/common/board.h | 6 +
> board/nvidia/dts/tegra2-seaboard.dts | 92 ++++
> board/nvidia/seaboard/seaboard.c | 6 +
> doc/device-tree-bindings/README | 17 +
> .../clock/nvidia,tegra20-car.txt | 207 +++++++
> doc/device-tree-bindings/i2c/tegra20-i2c.txt | 23 +
> doc/device-tree-bindings/usb/tegra-usb.txt | 25 +
> drivers/i2c/Makefile | 1 +
> drivers/i2c/tegra_i2c.c | 569 ++++++++++++++++++++
> drivers/usb/host/Makefile | 1 +
> drivers/usb/host/ehci-hcd.c | 7 +
> drivers/usb/host/ehci-tegra.c | 62 +++
> drivers/usb/host/ehci.h | 6 +-
> include/configs/seaboard.h | 20 +
> include/configs/tegra2-common.h | 13 +
> include/configs/ventana.h | 5 +
> include/fdtdec.h | 197 +++++++-
> lib/Makefile | 1 +
> lib/fdtdec.c | 323 +++++++++++-
> lib/fdtdec_test.c | 226 ++++++++
> 36 files changed, 3038 insertions(+), 55 deletions(-)
> create mode 100644 arch/arm/cpu/armv7/tegra2/usb.c
> create mode 100644 arch/arm/dts/skeleton.dtsi
> create mode 100644 arch/arm/dts/tegra20.dtsi
> create mode 100644 arch/arm/include/asm/arch-tegra2/tegra_i2c.h
> create mode 100644 arch/arm/include/asm/arch-tegra2/usb.h
> create mode 100644 board/nvidia/dts/tegra2-seaboard.dts
> create mode 100644 doc/device-tree-bindings/README
> create mode 100644 doc/device-tree-bindings/clock/nvidia,tegra20-car.txt
> create mode 100644 doc/device-tree-bindings/i2c/tegra20-i2c.txt
> create mode 100644 doc/device-tree-bindings/usb/tegra-usb.txt
> create mode 100644 drivers/i2c/tegra_i2c.c
> create mode 100644 drivers/usb/host/ehci-tegra.c
> create mode 100644 lib/fdtdec_test.c
Applied to u-boot-arm/master, thanks!
Amicalement,
--
Albert.
next prev parent reply other threads:[~2012-03-29 6:13 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-03-28 21:48 [U-Boot] pull request for u-boot-tegra/master Tom Warren
2012-03-29 6:13 ` Albert ARIBAUD [this message]
-- strict thread matches above, loose matches on Subject: below --
2012-08-31 21:28 Tom Warren
2012-09-01 6:56 ` Albert ARIBAUD
2012-08-17 23:25 Tom Warren
[not found] ` <20120818212141.3e4f5a3a@lilith>
[not found] ` <CA+m5__J7O=YYWEwTGqTBqiagTL+YU3BR-TyE5M2W_xdesVWqmA@mail.gmail.com>
[not found] ` <5032684A.2040703@ti.com>
[not found] ` <CA+m5__+prjk_GgvK5uZf1m23t3nsSiYu-nYRcci4my59q7T6-w@mail.gmail.com>
[not found] ` <CA+m5__Kiq0-ZYjarTXZRFZTC71wWV=c0fmzCJW=-Dt5fgK+dxA@mail.gmail.com>
[not found] ` <20120825103410.7fc86952@lilith>
[not found] ` <20120828165448.GD9587@nvidia.com>
[not found] ` <20120830083325.031e31d4@lilith>
[not found] ` <CA+m5__+gNxyB1nVSe-8DTE=seqBvOQTz2NsPTh=h3kTOCY9rCw@mail.gmail.com>
[not found] ` <20120830224742.678423bc@lilith>
[not found] ` <5FBF8E85CA34454794F0F7ECBA79798F379E005FB3@HQMAIL04.nvidia.com>
[not found] ` <20120830234733.1aea4c7e@lilith>
[not found] ` <5FBF8E85CA34454794F0F7ECBA79798F379E006051@HQMAIL04.nvidia.com>
2012-08-31 6:32 ` Albert ARIBAUD
2012-07-30 20:07 Tom Warren
2012-08-03 23:35 ` Tom Warren
2012-08-05 19:46 ` Albert ARIBAUD
2012-08-05 20:01 ` Albert ARIBAUD
2012-08-06 15:53 ` Tom Warren
2012-08-06 17:37 ` Allen Martin
2012-08-06 22:46 ` Allen Martin
2012-08-07 6:53 ` Albert ARIBAUD
2012-08-07 16:03 ` Tom Warren
2012-08-07 17:15 ` Allen Martin
2012-08-06 15:18 ` Tom Warren
2012-08-07 16:27 ` Tom Warren
2012-07-09 17:49 Tom Warren
2012-07-09 20:42 ` Albert ARIBAUD
2012-05-31 16:47 Tom Warren
2012-06-07 16:02 ` Tom Warren
2012-06-08 19:36 ` Albert ARIBAUD
2012-06-08 19:41 ` Albert ARIBAUD
2012-06-08 21:44 ` Albert ARIBAUD
2012-06-08 22:00 ` Stephen Warren
2012-06-08 22:36 ` Stephen Warren
2012-06-08 22:52 ` Stephen Warren
2012-06-09 1:53 ` Simon Glass
2012-06-11 21:59 ` Stephen Warren
2012-06-10 8:22 ` Albert ARIBAUD
2012-05-03 15:56 Tom Warren
2012-05-04 7:30 ` Albert ARIBAUD
2012-05-04 15:36 ` Tom Warren
2012-04-26 21:14 Tom Warren
2012-03-09 22:39 Tom Warren
2012-03-10 8:25 ` Wolfgang Denk
2012-03-10 19:34 ` Simon Glass
2012-03-12 19:30 ` Tom Warren
2012-03-12 20:24 ` Simon Glass
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4F73FD98.1050004@aribaud.net \
--to=albert.u.boot@aribaud.net \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox