From: Donghwa Lee <dh09.lee@samsung.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] ARM: EXYNOS: definition of system registers
Date: Fri, 30 Mar 2012 10:23:59 +0900 [thread overview]
Message-ID: <4F750B2F.40501@samsung.com> (raw)
In-Reply-To: <CALrBrZ1Hyu+rFsL+BHC=r4QrkpTa4pORup5B4Hi-BXz=nFpGhA@mail.gmail.com>
Hi,
On 29 March 2012 23:37, Minkyu Kang wrote:
> Dear Donghwa,
>
> On 29 March 2012 17:50, Donghwa Lee <dh09.lee@samsung.com> wrote:
>> This is definition of system registers for EXYNOS SoC.
>>
>> Signed-off-by: Donghwa Lee <dh09.lee@samsung.com>
>> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
>> ---
>> arch/arm/include/asm/arch-exynos/cpu.h | 2 +
>> arch/arm/include/asm/arch-exynos/system.h | 51 +++++++++++++++++++++++++++++
>> 2 files changed, 53 insertions(+), 0 deletions(-)
>> create mode 100644 arch/arm/include/asm/arch-exynos/system.h
>>
>> diff --git a/arch/arm/include/asm/arch-exynos/cpu.h b/arch/arm/include/asm/arch-exynos/cpu.h
>> index 89f2c2e..70048f0 100644
>> --- a/arch/arm/include/asm/arch-exynos/cpu.h
>> +++ b/arch/arm/include/asm/arch-exynos/cpu.h
>> @@ -29,6 +29,7 @@
>> /* EXYNOS4 */
>> #define EXYNOS4_GPIO_PART3_BASE 0x03860000
>> #define EXYNOS4_PRO_ID 0x10000000
>> +#define EXYNOS4_SYSREG_BASE 0x10010000
>> #define EXYNOS4_POWER_BASE 0x10020000
>> #define EXYNOS4_SWRESET 0x10020400
>> #define EXYNOS4_CLOCK_BASE 0x10030000
>
> need base address of exynos5 also.
>
SYSREG_BASE address of exynos5 was already included in this file.
>> diff --git a/arch/arm/include/asm/arch-exynos/system.h b/arch/arm/include/asm/arch-exynos/system.h
>> new file mode 100644
>> index 0000000..2e99c0d
>> --- /dev/null
>> +++ b/arch/arm/include/asm/arch-exynos/system.h
>> @@ -0,0 +1,51 @@
>> +/*
>> + * (C) Copyright 2012 Samsung Electronics
>> + * Donghwa Lee <dh09.lee@samsung.com>
>> + *
>> + * This program is free software; you can redistribute it and/or
>> + * modify it under the terms of the GNU General Public License as
>> + * published by the Free Software Foundation; either version 2 of
>> + * the License, or (at your option) any later version.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> + * You should have received a copy of the GNU General Public License
>> + * along with this program; if not, write to the Free Software
>> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
>> + * MA 02111-1307 USA
>> + *
>> + */
>> +
>> +#ifndef __ASM_ARM_ARCH_SYSTEM_H_
>> +#define __ASM_ARM_ARCH_SYSTEM_H_
>> +
>> +#ifndef __ASSEMBLY__
>> +struct exynos4_sysreg {
>> + unsigned char res1[0x210];
>> + unsigned int display_ctrl;
>> + unsigned int display_ctrl2;
>> + unsigned int camera_control;
>> + unsigned int audio_endian;
>> + unsigned int jtag_con;
>> +};
>> +
>> +struct exynos5_sysreg {
>> + unsigned char res1[0x214];
>> + unsigned int disp1blk_cfg;
>> + unsigned int disp2blk_cfg;
>> + unsigned int hdcp_e_fuse;
>> + unsigned int gsclblk_cfg0;
>> + unsigned int gsclblk_cfg1;
>> + unsigned int reserved;
>> + unsigned int ispblk_cfg;
>> + unsigned int usb20phy_cfg;
>> + unsigned int mipi_dphy;
>> + unsigned int dptx_dphy;
>> + unsigned int phyclk_sel;
>> +};
>> +#endif
>> +
>> +#endif /* _EXYNOS4_SYSTEM_H */
>> --
>
> Where is it use?
> Need codes for using it.
>
This is used to control various signal of exynos. For example, it can contorl to FIMD of LBLK0 bypass selection.
Thank you,
Donghwa Lee.
next prev parent reply other threads:[~2012-03-30 1:23 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-03-29 8:50 [U-Boot] [PATCH] ARM: EXYNOS: definition of system registers Donghwa Lee
2012-03-29 14:37 ` Minkyu Kang
2012-03-30 1:23 ` Donghwa Lee [this message]
2012-03-30 1:28 ` Minkyu Kang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4F750B2F.40501@samsung.com \
--to=dh09.lee@samsung.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox