[U-Boot] [PATCH][resubmit] eb_cpux9k2: add USB host support to board

[esw at bus-elektronik.de <esw@bus-elektronik.de>]

Am 2012-04-01 18:14, schrieb Marek Vasut:
> Dear Jens Scharsig,
> 
>> * add USB host support to eb_cpux9k2 board
> 
> Did you test this too?

Of course, I've test this with/against current RC1.

> 
> CCing Albert, Albert do you want me to push this through staging or you'll pick 
> this?
> 
>> Signed-off-by: Jens Scharsig <js_at_ng@scharsoft.de>
>> ---
>>  include/configs/eb_cpux9k2.h |   14 ++++++++++++++
>>  1 files changed, 14 insertions(+), 0 deletions(-)
>>
>> diff --git a/include/configs/eb_cpux9k2.h b/include/configs/eb_cpux9k2.h
>> index 9046cf0..eb05e2a 100644
>> --- a/include/configs/eb_cpux9k2.h
>> +++ b/include/configs/eb_cpux9k2.h
>> @@ -139,6 +139,8 @@
>>  #define CONFIG_CMD_PING
>>  #define CONFIG_I2C_CMD_NO_FLAT
>>  #define CONFIG_I2C_CMD_TREE
>> +#define CONFIG_CMD_USB
>> +#define CONFIG_CMD_FAT
>>
>>  #define CONFIG_SYS_LONGHELP
>>
>> @@ -169,6 +171,18 @@
>>  /*
>>   * Hardware drivers
>>   */
>> +#define CONFIG_USB_ATMEL
>> +#define CONFIG_USB_OHCI_NEW
>> +#define CONFIG_AT91C_PQFP_UHPBUG
>> +#define CONFIG_USB_STORAGE
>> +#define CONFIG_DOS_PARTITION
>> +#define CONFIG_ISO_PARTITION
>> +#define CONFIG_EFI_PARTITION
>> +
>> +#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	1
>> +#define CONFIG_SYS_USB_OHCI_CPU_INIT
>> +#define CONFIG_SYS_USB_OHCI_REGS_BASE		0x00300000
>> +#define CONFIG_SYS_USB_OHCI_SLOT_NAME		"at91rm9200"
>>
>>  /*
>>   * UART/CONSOLE
> 
> Best regards,
> Marek Vasut

Tested-by: Jens Scharsig <js_at_ng@scharsoft.de>


Best regards

Jens Scharsig