From mboxrd@z Thu Jan 1 00:00:00 1970 From: esw at bus-elektronik.de Date: Mon, 2 Apr 2012 08:20:34 +0200 Subject: [U-Boot] [PATCH][resubmit] eb_cpux9k2: add USB host support to board In-Reply-To: <201204011814.49948.marex@denx.de> References: <1333294142-7433-1-git-send-email-js_at_ng@scharsoft.de> <201204011814.49948.marex@denx.de> Message-ID: <4F794532.9050708@bus-elektronik.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Am 2012-04-01 18:14, schrieb Marek Vasut: > Dear Jens Scharsig, > >> * add USB host support to eb_cpux9k2 board > > Did you test this too? Of course, I've test this with/against current RC1. > > CCing Albert, Albert do you want me to push this through staging or you'll pick > this? > >> Signed-off-by: Jens Scharsig >> --- >> include/configs/eb_cpux9k2.h | 14 ++++++++++++++ >> 1 files changed, 14 insertions(+), 0 deletions(-) >> >> diff --git a/include/configs/eb_cpux9k2.h b/include/configs/eb_cpux9k2.h >> index 9046cf0..eb05e2a 100644 >> --- a/include/configs/eb_cpux9k2.h >> +++ b/include/configs/eb_cpux9k2.h >> @@ -139,6 +139,8 @@ >> #define CONFIG_CMD_PING >> #define CONFIG_I2C_CMD_NO_FLAT >> #define CONFIG_I2C_CMD_TREE >> +#define CONFIG_CMD_USB >> +#define CONFIG_CMD_FAT >> >> #define CONFIG_SYS_LONGHELP >> >> @@ -169,6 +171,18 @@ >> /* >> * Hardware drivers >> */ >> +#define CONFIG_USB_ATMEL >> +#define CONFIG_USB_OHCI_NEW >> +#define CONFIG_AT91C_PQFP_UHPBUG >> +#define CONFIG_USB_STORAGE >> +#define CONFIG_DOS_PARTITION >> +#define CONFIG_ISO_PARTITION >> +#define CONFIG_EFI_PARTITION >> + >> +#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1 >> +#define CONFIG_SYS_USB_OHCI_CPU_INIT >> +#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00300000 >> +#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91rm9200" >> >> /* >> * UART/CONSOLE > > Best regards, > Marek Vasut Tested-by: Jens Scharsig Best regards Jens Scharsig